posted May 08, 2013 02:32 PM
Edited By: BLK ICE on 8 May 2013 23:26
"Leonidas" Build by "Adams Performance"
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
posted May 08, 2013 05:05 PM
Edited By: BLK ICE on 9 May 2013 01:08
stock wb to power adders to Grudge
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
posted May 08, 2013 05:13 PM
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
He brought us that bike and we stuck it on our dyno and it made 10hp less than Jeremy Teasley's real street bike, and Rickey's bike had more cc's and the large throttle bodies.. I laid Rickey's dynop graph over JT's and he was heart broken. Just ask Rickey what he said after he seen that... We have the fastest ZX14 period in world and the records so it.Real Talk
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
That motor build off on psycho bike never did happen last year. We were stoked to compete in that. All the builders were all talk at first but then the big names kept coming up with some excuse or another as to why it wouldn't be fair etc.etc. etc. Whatever.
That motor build off on psycho bike never did happen last year. We were stoked to compete in that. All the builders were all talk at first but then the big names kept coming up with some excuse or another as to why it wouldn't be fair etc.etc. etc. Whatever.
not all the builders come up with excuses, we are and all always will be game
____________
Coby Adams
That motor build off on psycho bike never did happen last year. We were stoked to compete in that. All the builders were all talk at first but then the big names kept coming up with some excuse or another as to why it wouldn't be fair etc.etc. etc. Whatever.
not all the builders come up with excuses, we are and all always will be game
posted May 10, 2013 07:19 AM
In the VW aircooled aftermarket we had a builders showdown. Pump gas street motor and CB Performance where I work kicked everyone's asses. http://www.dragracingtv.com/vw/misc/chico-performance-engine-builder-showdown-part1-2006.html
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
quote:In the VW aircooled aftermarket we had a builders showdown. Pump gas street motor and CB Performance where I work kicked everyone's asses. http://www.dragracingtv.com/vw/misc/chico-performance-engine-builder-showdown-part1-2006.html
They told me i was to good looking to be in this!!!
____________
Coby Adams
quote:In the VW aircooled aftermarket we had a builders showdown. Pump gas street motor and CB Performance where I work kicked everyone's asses. http://www.dragracingtv.com/vw/misc/chico-performance-engine-builder-showdown-part1-2006.html
They told me i was to good looking to be in this!!!
HeHehe LOL
____________
"Cajun Boyz with Bad Ass Toys"
posted May 10, 2013 06:06 PM
I have Adams headwork on my 14 and I'm impressed. I use it for 1/8, 1/4, and 1 mile racing. I have been 205mph at Maxton with headwork only. Stock throttle bodies, stock wheelbase, street bodywork and factory gas tank. I've used him in the past with great results and will continue to use them.
posted May 10, 2013 07:42 PM
I have a Adams head on my first gen 14 with stock bore 13.5:1 JE's, stock stroke, Carrillo rods, Jim's 47's stock cams with stock cam timing and I use MR12 and sits I at 640lbs total weight. It makes right at 200hp on a Dynojet 250i. At the track my best ET has been a 8.43@158mph. Best MPH is 162mph. I haven't sprayed it yet but I'm hoping for my first 7.90 or better pass. I'm sure Jim's stuff hauls the mail but as far as i know there isn't anyone here on the west coast that has his engine mods. So far I am very pleased with Adams performances products and services.
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
quote:In the VW aircooled aftermarket we had a builders showdown. Pump gas street motor and CB Performance where I work kicked everyone's asses. http://www.dragracingtv.com/vw/misc/chico-performance-engine-builder-showdown-part1-2006.html
They told me i was to good looking to be in this!!!
You gotta build VW racing motors if you wanna compete in that competition. Lol
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
posted May 14, 2013 09:53 PM
254 Horsepower was on Rickey's Dyno not JIMS ??? So, yeah different locations and different times is a factor. So , yeah when he put the 254 horsepower monster on Coby's them Dyno sure it's gonna make less on a different day and location, different weather conditions and different dyno. Unless "Garron or Coby" meant that they put Teasley's bike and Rickey's bike on the same dyno on the same day then maybe they have a valid point. Just my .2 cents but again we don't know all of the details on how it went down either..... I'm rolling with JIM and CNC. PERIOD....
posted May 14, 2013 09:59 PM
Details meaning: Obviously Teasley's bike was tuned their at Coby's them shop...Don't know if they attempted to tune Rickey's bike for their specific location or just stuck it on the dyno since it had more CC's and bigger throttle bodies ????
I was really looking forward to this turning into a good ole fashion pissing contest, I'm disappointed now.....
____________
06 zx14, 65", lowered, muzzy pipe, pcIII, air shifter, Litz revalve, Adams cut seat, OSR cut pan 87 pump gas.
posted May 16, 2013 02:58 PM
Ya deff would go for jim , his numbers are real not blowing smoke on race fuel and there dyno. Rickys turbo bike was played with bye jim and that thing is nasty , jim does his own in house porting and his head can not be touched . I dont think jim has a dyno but had a guy do itfor him so there is no qs of his dyno being stingy or read high .
posted May 16, 2013 09:08 PM
Throw them terds on the track and let the shit slingin begin.
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
posted May 17, 2013 04:06 AM
Edited By: Y2KZX12R on 17 May 2013 12:09
Just a quick update.... were regularly delivering 240 hp now on stock bore and stroke drag race gen 2 zx14's with drop in pistons and our head and cam package.
240 hp is what this combo is averaging on customers local dyno jet 250i dyno's.
Also the 3x5 gen 1 1570's are producing more midrange torque now with a cam change and pipe modification. The peak hp is down a little to 266 hp but the added midrange torque makes the engine quicker down the track. Just like the original 270+ hp combo, this engine still requires a custom header. You can not run any available production pipes. The exhaust flange is modified.
It also requires our 50mm billet throttle bodies or our 48mm oem bored throttle bodies.
posted May 17, 2013 09:23 AM
Damn I need to add 4mm stroke and some cams. Mine is making right at 200 HP with 13.5:1 JE's and stock cams with stocks cam gears and Adams head. Or maybe ill just do a 2mil over bore next year.
____________
1352cc 8.39@159mph on motor cant wait to spray this bitch
posted May 17, 2013 09:34 AM
Edited By: 1badzx12r on 17 May 2013 17:35
quote: 270+ hp combo,
adams said bullshitt
quote:You can buy inflated dyno numbers if you want, but we want ET. All I know is Leonidas never made over 300 and we all know it was the fastest all motor bike at the time. And no zx14 is making 270+ We need these dyno these people use our zx14 would make 300 and the busa grudge bikes would make 360.
posted May 17, 2013 09:39 PM
Edited By: BLK ICE on 18 May 2013 05:45
quote:Just a quick update.... were regularly delivering 240 hp now on stock bore and stroke drag race gen 2 zx14's with drop in pistons and our head and cam package.
240 hp is what this combo is averaging on customers local dyno jet 250i dyno's.
Also the 3x5 gen 1 1570's are producing more midrange torque now with a cam change and pipe modification. The peak hp is down a little to 266 hp but the added midrange torque makes the engine quicker down the track. Just like the original 270+ hp combo, this engine still requires a custom header. You can not run any available production pipes. The exhaust flange is modified.
It also requires our 50mm billet throttle bodies or our 48mm oem bored throttle bodies.
240 with only drop ins and head work sound cost effective. How much for this set up if you do it, and how much if we do it ourself with your pistons,tbs, head, cams, and specs?
how much can be sprayed with this set-up?
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
All times are America/Va [ This thread is 5 pages long: 12345Next» ]
HOME
NEW TOPIC
posted May 08, 2013 02:32 PM
Edited By: 
