HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Angus and Wheelie round 2 NEW TOPIC NEW POLL POST REPLY
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 05:49 PM        
quote:
quote:
quote:
quote:
quote:
Wee, didn't you run same numbers on your last 14? hope the tune helps alot otherwise not much of an improvement to me. you had a good 60 foot!
Bently, if you want to make a judgement call on my 2nd time at the track vs 100's and 100's of runs on my 09 go ahead and make the call.

wee


Just saying your 60 foot was there, would have been different if you only went 1.45 or something. Seems your riding it well already.
a/f is the issue, it needs more gas.....

wee


Well that's what I said, I hope the tune helps alot because your 60 foot was good already!
remember, I've only been to the track two times, I know I can get those 60's in the low 1.30's and maybe the infamous 1.29.... with more seat time.

wee
  Ignore this member   
JZX


Zone Head
Posts: 943
 		posted January 15, 2012 06:07 PM        
Wee, are you heavier now then when you ran 5.64 on your old bike?

Also, surprising the extra RPM didnt help. ??




____________
06 ZX14 65"

Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 06:10 PM        
quote:
Wee, are you heavier now then when you ran 5.64 on your old bike?

Also, surprising the extra RPM didnt help. ??



yes, a little heavier

wee
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 06:11 PM        
also the Alumipro swingarm is heavier then the IB Pro

wee
  Ignore this member   
smokinZX14


Needs a life
Posts: 10197
 		posted January 15, 2012 06:16 PM        
His was running a 10600 chip .. When i switched from 10600 to 10800 i picked up 1 and 1/2 MPH ... 10900 he tried may have been too much RPMs ..I think he will go faster with a 10800 chip ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
  Ignore this member   
1badzx12r


Needs a life
Posts: 8321
 		posted January 15, 2012 06:22 PM        
yada yada yada yawn's
____________
http://www.youtube.com/watch?v=S06nIz4scvI
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 06:23 PM        
quote:
yada yada yada yawn's
go back to sleep Sasquatch

wee
  Ignore this member   
Lucky14


Pro
Posts: 1439
 		posted January 15, 2012 06:28 PM        
quote:
quote:
Needs a tune BAD!!!
You're not supposed to be here

wee



I was never there, no one saw me, you can't prove it.


.................. ergo, no video ....................



____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 06:29 PM        
quote:
NIce...and very lean!! 10R PC for you!!
I hope I can wait for the 14r pcv.

wee
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 06:30 PM        
quote:
quote:
quote:
Needs a tune BAD!!!
You're not supposed to be here

wee



I was never there, no one saw me, you can't prove it.


.................. ergo, no video ....................


notice I'm not posting any time slips? Did it happen ? Bikeland wants to know

wee
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 06:35 PM        
quote:
Forgive me for asking but how long is the bike and what do you weigh?
69" 215

wee
  Ignore this member   
edszx14


Expert Class
Posts: 271
 		posted January 15, 2012 06:48 PM        
Hey Wheelie, its was good to see you again and to meet Lucky 14 and KawTom. The bike looks great and really flies. I wish mine was that fast. Very nice job.
____________
Ed
  Ignore this member   
kaw-rick


Pro
Posts: 1167
 		posted January 15, 2012 06:50 PM        
video please
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 06:55 PM        
quote:
Hey Wheelie, its was good to see you again and to meet Lucky 14 and KawTom. The bike looks great and really flies. I wish mine was that fast. Very nice job.
Eddie it looked like a bunch of Old Buzzards around my trailer LOL good seein you in person again, btw that was kawa74.

wee
  Ignore this member   
smokinZX14


Needs a life
Posts: 10197
 		posted January 15, 2012 07:29 PM        
Wee what did you use for shims on the clutch springs ? I haven't found anything that seems to fit right ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 07:38 PM        
quote:
Wee what did you use for shims on the clutch springs ? I haven't found anything that seems to fit right ..
lol, lock washers straightened I think they are 9/16 i.d. I'm only using 3

wee
  Ignore this member   
Lucky14


Pro
Posts: 1439
 		posted January 15, 2012 07:49 PM        

Example run today:






____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
  Ignore this member   
Lucky14


Pro
Posts: 1439
 		posted January 15, 2012 07:55 PM        

Squat from last week with stock shock:





Squat this week with Litz revalved shock:





____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
  Ignore this member   
Wheelie


Needs a life
Old Man
Posts: 6902
 		posted January 15, 2012 07:59 PM        
my shock has a 08 Booza spring on it, Litz revalve , all settings are all the way out, maybe some shock experts can chime in on what they see.

wee
  Ignore this member   
edszx14


Expert Class
Posts: 271
 		posted January 15, 2012 08:16 PM        
Hey wheelie and Kawa74. sorry about the wrong name. hello Kawa74 and sorry about that KawiTom. Can't wait to get mine back out there. keep up the fast times. I can definitely use some lessons. See u soon.
____________
Ed
  Ignore this member   
smokinZX14


Needs a life
Posts: 10197
 		posted January 15, 2012 08:24 PM        
quote:
quote:
Wee what did you use for shims on the clutch springs ? I haven't found anything that seems to fit right ..
lol, lock washers straightened I think they are 9/16 i.d. I'm only using 3

wee
That is what i used also ... I just didn't like to look of them so i removed them ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
 		posted January 15, 2012 08:37 PM        
have you thought about using a Reactor or MT?
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
  Ignore this member   
madnessracing


Pro
Vmax and Busa Beater
Posts: 1140
 		posted January 15, 2012 09:07 PM        
I will try the reactor on my next race
____________
Shorty's Performance
Team Madness Racing
  Ignore this member   
KZScott


Needs a life
high on speed
Posts: 7235
 		posted January 15, 2012 09:24 PM        
will your bike be as long as Wees?. Ive ran the 7in MT on dads 1287 at 74, but dont have the tq of the 14 let alone the gen 2. planning on trying a reactor when the snow melts.....
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
  Ignore this member   
justoyz2


Zone Head
Justoyz Racing
Posts: 858
 		posted January 15, 2012 10:41 PM        
Lee,

Head to ACE, they sell shims, on the low, they have various thickness. Take one of your springs with you to get the right width.


____________
2012 zx14R-blue,2012 zx14R-black, 2014 zx14Trbo, 2011 zx10R, 2007 zx10 Turbo.....
  Ignore this member   
All times are America/Va [ This thread is 4 pages long: 1  2  3  4     Next» ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Angus and Wheelie round 2 NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed

Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.29686093330383 seconds processing time