HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: What a difference a sprocket and a tire make + boost NEW TOPIC NEW POLL POST REPLY
06redzx14


Pro
Posts: 1022
posted July 06, 2011 01:27 PM        
Was your nos on the button or throttle? How big of a shot?
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot

  Ignore this member   
Slowninja


Expert Class
Slow-ride
Posts: 189
posted July 06, 2011 02:27 PM        
Throttle with a controller. That was probably when i was running the 120 shot (hence why i blew through the clutches on the back half lol)

Bike was making 220 on motor so i'd guess i was between 320-340hp in the 1/8 until the clutches gave up. I was running a real street style race and never could find a set of springs that could hold the pwer
____________
06 zx14
SWB
9.24 @ 148

  Ignore this member   
Slowninja


Expert Class
Slow-ride
Posts: 189
posted July 06, 2011 02:29 PM        
Also, to the OP.. You may look into different gearing. I know you liked the difference going up in the back, but with all the power i found it was easier to launch with an 18T front and stock back. Just a thought
____________
06 zx14
SWB
9.24 @ 148

  Ignore this member   
Stu64


Zone Head
Posts: 548
posted July 06, 2011 06:00 PM        
I had two passes last time at the track 137 1/8 176 1/4 ,but had shitty 60 ft times and et's.
Hoping once i get used to lauching the bike again,I say again because with the turbo its a whole new ballgame when the boost starts coming on, at least with spray you can control when it comes on or not.

  Ignore this member   
Slowninja


Expert Class
Slow-ride
Posts: 189
posted July 06, 2011 07:54 PM        
You can always buy a boost controller!
____________
06 zx14
SWB
9.24 @ 148

  Ignore this member   
Stu64


Zone Head
Posts: 548
posted July 07, 2011 09:21 AM        
quote:
You can always buy a boost controller!


Boost controller cannot over ride intial wastegate spring PSI,so in my case i have a 5psi spring which is creeping to almost 9 psi before wastegate is opening or so i'm thinking.
When that boost hits in 1st gear hold on!!

  Ignore this member   
Big_T112


Pro
Posts: 1061
posted July 08, 2011 11:19 AM        Edited By: Big_T112 on 8 Jul 2011 19:21
They make a 3 lb. spring. I have the 5 in mine. I leave with as least amount of turbo spool as I can. So basically it's at idle. I need the lag to get going. I have a GT28R dbb turbo. It spools pretty quick to be as big as it is. Even at idle when you cut the bike off you can still hear it spin for 15 to 25 seconds. By second gear it's full tilt pulling your arms back. A CO2 operated boost controller is the way to go. I use a 2.5 lb. nitrous bottle for the C02 tank and it last forever. You can get the dual regulator and run your airshifter off of the same bottle if you want.
  Ignore this member   
Stu64


Zone Head
Posts: 548
posted July 08, 2011 03:10 PM        
Mine has a evolution wastegate and 5psi is the smallest spring i could find for it.
  Ignore this member   
Big_T112


Pro
Posts: 1061
posted July 08, 2011 07:25 PM        
Yea, that means by the top of first you are making some good power. I try to short shift mine to 2nd and that's how I run my best ET. It sounds like you are lugging the motor but the torque pulls like a tractor. then it wide open the rest of the way. Just hang on and wait for the shift light to come on.
  Ignore this member   
NINJA12


Needs a job
Posts: 3310
posted July 12, 2011 07:57 AM        
Big_T can you give a little comparison on 93 vs AV GAS vs C16?
How they stack in power and injector requirements.

  Ignore this member   
01smokes


Needs a job
Posts: 2243
posted July 12, 2011 01:08 PM        
quote:
Big_T can you give a little comparison on 93 vs AV GAS vs C16?
How they stack in power and injector requirements.


They are all gas so "normal" size injectors will work as long as your not out if fuel for rge power. But 93 I wouldn't take passed around 250ish HP. AV gas I would trust for a mid boost or around 300-325 or so. And c16 will take it all 500+ HP
____________
PayPal, vigilart22@yahoo.com

Email, artvgl@yahoo.com

  Ignore this member   
Big_T112


Pro
Posts: 1061
posted July 12, 2011 06:19 PM        
Av gas is a dryer gas. I pour 1 of the little 4oz. premix 2 stroke bottles in to 5 gallons. If you tune for AV gas and then put C16 in there it will be a little rich. But that's OK if you want to turn the boost up. 93, I want run over 10lbs on my low compression turbo motor. On a stock motor, especially a ZX14 piston I would not go over 6 lbs. Detonation will kill your motor. All can be tuned with stock injectors although I have MPS 62lb. hr. injectors in mine. I tuned to AV gas because it will run the leanest on it. That way when I put C16 and turn it up it runs good and I can leave it on the spring with 93 and it will be rich enough to run it without worrys of detonation. Don't make a mistake of thinking more fuel will allow more boost. The Octane rating is the limiting factor not how much you inject. hope this helps.
  Ignore this member   
All times are America/Va [ This thread is 2 pages long: 1  2   ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: What a difference a sprocket and a tire make + boost NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.2973849773407 seconds processing time