gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted May 04, 2011 01:11 PM
Never mind. I'm an idiot. My stack height was fine, but I had the clutch pack in backwards. The first fiber to go in is larger in diameter, allowing you to use what the manual calls a "spring." Well I had the stack in backwards, so the "spring" was adding to the stack height. Needless to say, I got it working correctly now. Thanks all!
  
|
1badzx12r
Needs a life
Posts: 8321
|
posted May 05, 2011 07:55 AM
 Edited By: 1badzx12r on 5 May 2011 15:58
quote:
. The first fiber to go in is larger in diameter, allowing you to use what the manual calls a "spring." !
now you can go back in there and throw that 1st fiber in the trash ..along with the spring and put a full fiber in its place .. i use a busa fiber as my 1st fiber ..the khi thin original with burn up with your HP dragracing it
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted May 05, 2011 01:18 PM
ya ditch the judder spring and thin fiber for a regular fiber.
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
FIREBRAND74
Novice Class
Posts: 63
|
posted May 18, 2011 05:29 PM
what is the reason for using a regular fiber for the first???????
|
Slowninja
Expert Class
Slow-ride
Posts: 189
|
posted May 19, 2011 09:06 AM
Good lookin lockup you got there.
You've got too much weight on the arms. For using all 5 springs you're not going to need all that weight. Take the washers off at the very least.
Having too much weight on the arms will rob the bike of horsepower. I don't remember what kind of HP you said you were going to be making, but with 300+ i was only running 3 bolts, no washers.
____________
06 zx14
SWB
9.24 @ 148
|
1badzx12r
Needs a life
Posts: 8321
|
posted May 19, 2011 09:47 AM
Edited By: 1badzx12r on 19 May 2011 17:48
quote:
what is the reason for using a regular fiber for the first???????
because the contact area of the fiber with the chatter rings is to small onto the inner hub .. and you fry that 1st fiber quick when your making hp on launching ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
LeonidasZX14
Pro
Posts: 1277
|
posted May 19, 2011 01:14 PM
quote:
Good lookin lockup you got there.
You've got too much weight on the arms. For using all 5 springs you're not going to need all that weight. Take the washers off at the very least.
Having too much weight on the arms will rob the bike of horsepower. I don't remember what kind of HP you said you were going to be making, but with 300+ i was only running 3 bolts, no washers.
I would have to disagree, depending on riding style, HP, static pressure, gearing etc... I run 5 Steel bolts with two washers on each and that is the only thing that will hold a clutch together in my bike. Any less and it smears fibers in one pass.
____________
09' ZX14
|
LeonidasZX14
Pro
Posts: 1277
|
posted May 19, 2011 01:17 PM
quote:
quote:
what is the reason for using a regular fiber for the first???????
because the contact area of the fiber with the chatter rings is to small onto the inner hub .. and you fry that 1st fiber quick when your making hp on launching ..
What fiber do you run instead of the small Kawi one? I run a thick Busa one but I would be curious if Kawi made a thick one like that.
____________
09' ZX14
|
kawasakijockey
Pro
Posts: 1876
|
posted May 19, 2011 02:05 PM
quote:
quote:
quote:
what is the reason for using a regular fiber for the first???????
because the contact area of the fiber with the chatter rings is to small onto the inner hub .. and you fry that 1st fiber quick when your making hp on launching ..
What fiber do you run instead of the small Kawi one? I run a thick Busa one but I would be curious if Kawi made a thick one like that.
The Connie 14 has thicker fibers but not sure if they are a thick as the small 14 one.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
LeonidasZX14
Pro
Posts: 1277
|
posted May 19, 2011 02:10 PM
quote:
quote:
quote:
quote:
what is the reason for using a regular fiber for the first???????
because the contact area of the fiber with the chatter rings is to small onto the inner hub .. and you fry that 1st fiber quick when your making hp on launching ..
What fiber do you run instead of the small Kawi one? I run a thick Busa one but I would be curious if Kawi made a thick one like that.
The Connie 14 has thicker fibers but not sure if they are a thick as the small 14 one.
Thanks
____________
09' ZX14
|
|
|
HOME
NEW TOPIC