no fuel priming, or no starter motor, @ ZX-14.com

HOME

ARTICLES

JOIN

BIKELAND > FORUMS > ZX-14.com > Thread: no fuel priming, or no starter motor,

NEW TOPIC NEW POLL POST REPLY

kiwi12

Novice Class
Posts: 54

posted October 04, 2010 02:58 AM

no fuel priming, or no starter motor,

Ok, i am lucky im bald, because i would have pulled out all my hir by now,,,,,,,,

I have just changed my main loom, ( as I was having voltage drop )

and in doing this I dropped the engine, and removed the old loom. and replaced with a second hand 2002 loom,
my bike is a 03.
i took off the fuel tank, and replaced once the engine was back in the frame.

i did disconnect the tps, , and everything eles that was attache .. but have replaced everything back to the new loom.

w
Now when i turn the ignition on, all i get is the clocks starting up, but no fuel priming, or no starter motor,,

i stll have the radiator off,

any helps
,, please ,,
____________
____________
what is going on in here?

Hellmutt

Needs a job
Posts: 2013

posted October 04, 2010 04:37 AM

What are you working on? ZX12 right? Is it fitted with a PC? Fuses all good?
No prime, no starter power sounds like ( 1 ) poor connection somewhere ( 2 ) battery is shot?
Check your volts vs. amps on your battery as well as connections to and from.
Ensure your grounds are all tight..........anyone else chime in with better ideas?
____________
British flying couch with endtables and an orange thumper
________________________________________________

Click here to visit Hellmutt's homepage.

kiwi12

Novice Class
Posts: 54

posted October 04, 2010 11:40 AM

yep its a Zx12

no PC

Ill go theu all the connection again and check bat
____________
what is going on in here?

TH1RT3EN

Zone Head
Trial And Error Control
Posts: 722

posted October 05, 2010 02:58 AM

just so i ask did you make sure your kill switch was set to the run posisition and not turned off? It will kill the fuel pump and the starter as well..

Just a thought

Patrick
____________
There is a fine line between Fear and Respect

When I was a kid i used to........... Wait I Still Do That!

Hellmutt

Needs a job
Posts: 2013

posted October 05, 2010 09:22 AM

Elementary, yet easy to overlook sometimes - good call on that one
Would be sweet if thats all it was especially after all that harness work
he'd just done
____________
British flying couch with endtables and an orange thumper
________________________________________________

68gts2