Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 02, 2010 05:47 PM
50mm ZX14 Throttle Bodies...
Here are a few pictures as promised of the 50mm throttle bodies that we will be offering soon to complement our Stage 3 big valve CNC ported heads.
These are the first prototypes that will be used for initial dyno testing. We will be playing with different length stacks on the dyno so the final exact design is still open.
The fuel rail is a modified stock one but the production version will have a custom fuel rail.
____________
Y2KZX12R
CompetitionCNC.com
   
|
madnessracing
Pro
Vmax and Busa Beater
Posts: 1140
|
posted June 02, 2010 05:52 PM
Wow that looks good! I cant wait to see the final results! It would be nice to know the specs on the motor you guys are gonna be testing the throttle bodies with!
____________
Shorty's Performance
Team Madness Racing
|
smokinZX14
Needs a life
Posts: 10197
|
posted June 02, 2010 05:54 PM
quote:
Here are a few pictures as promised of the 50mm throttle bodies that we will be offering soon to complement our Stage 3 big valve CNC ported heads.
These are the first prototypes that will be used for initial dyno testing. We will be playing with different length stacks on the dyno so the final exact design is still open.
The fuel rail is a modified stock one but the production version will have a custom fuel rail.
 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 02, 2010 06:01 PM
Its an 87mm x 66mm 1570cc engine, Competition CNC's Stage 3 CNC ported head with 36mm/30mm valves, 450"/415" lift cams, a lot of compression, stock length rods......
Looking for peak power at about 11,600-11,800 rpm.
____________
Y2KZX12R
CompetitionCNC.com
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted June 02, 2010 06:38 PM
those are bad ass 
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted June 02, 2010 06:48 PM
Those look sweet!
|
oldkawboy
Needs a job
Posts: 2125
|
posted June 02, 2010 07:17 PM
Can't wait to see what kind of numbrs that monster will make Jim, not only on the dyno but at the strip or LSR event.
Do you think the stock ram air system will be a bottleneck on that beast?
Dan
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted June 02, 2010 08:23 PM
 Edited By: gilberjj on 3 Jun 2010 04:24
|
MADKAWZX14
Expert Class
RUNNING OUTTA CASH FAST
Posts: 102
|
posted June 02, 2010 10:01 PM
quote:
+1
____________
07 ZX14 CUSTOM PAINTED, BMC RACE FILTER, MUZZY M10, NITROUS, SPEEDOHEALER, FLIES OUT, MUZZY STROKER w/ GOODIES, PCIII w/CUSTOM MAP, ETC....
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 03, 2010 03:29 AM
quote:
Do you think the stock ram air system will be a bottleneck on that beast?
Yes big time. Its getting a new ram air duct system.
____________
Y2KZX12R
CompetitionCNC.com
|
Superman T
Pro
Posts: 1831
|
posted June 03, 2010 04:16 AM
WOW!
|
WRECKSHOP
Expert Class
Posts: 359
|
posted June 03, 2010 09:18 AM
Damn, they are nice. Going after every last bit of POWER !!!!
|
ZXLNT
Needs a job
Kawpuke Extraordinare
Posts: 2853
|
posted June 03, 2010 11:35 AM
Sproing!!!!
|
ZX14Mike
Zone Head
Posts: 891
|
posted June 04, 2010 11:44 AM
Jim............how much horsepower are you expecting with that package?
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 04, 2010 12:00 PM
I'm not quite sure... 
260-270??? Possably even more.
____________
Y2KZX12R
CompetitionCNC.com
|
dougmeyer
Needs a job
moderated
Posts: 2713
|
posted June 04, 2010 12:07 PM
Nice, Jim!
____________
It's not that I think you're dumb, it's just that so much of what you know isn't true....
|
WRECKSHOP
Expert Class
Posts: 359
|
posted June 04, 2010 12:50 PM
How much would a set of these 50mm throttle bodies COST ???
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 04, 2010 01:40 PM
quote:
How much would a set of these 50mm throttle bodies COST ???
I dont know just yet, we are making some changes with the spacers, fuel rail, stacks and throttle linkage. Once we dyno test the different stacks and play with the tuning length we will finalize the design and then I will know what they will cost.
We are going to also offer bored out (47mm) stock throttle bodies to complement the stage 2 CNC ported head.
____________
Y2KZX12R
CompetitionCNC.com
|
Ozonkiller
Expert Class
Posts: 350
|
posted June 04, 2010 05:02 PM
How much for the 47mm stock bodies? I have a spare set laying around
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 05, 2010 07:13 AM
quote:
How much for the 47mm stock bodies? I have a spare set laying around
$500
____________
Y2KZX12R
CompetitionCNC.com
|
880turbo
Novice Class
Posts: 34
|
posted June 15, 2010 04:40 PM
JIm; What is the best way to contact you? I would like to check with you about some cylinder head work. Please let me know. Thanks. Mike.
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 16, 2010 03:34 AM
Call the shop Competition CNC 860-274-0631
Thanks
____________
Y2KZX12R
CompetitionCNC.com
|
880turbo
Novice Class
Posts: 34
|
posted June 16, 2010 04:04 AM
Jim; Thanks for the number. I will give you a call when I get a chance. Mike.
|
|
|
HOME
NEW TOPIC