01smokes
Needs a job
Posts: 2243
|
posted January 27, 2010 08:37 PM
quote:
I buy the numbers , we have a zx14 here with stock guts and a 70 shot that has run the same numbers ..8.32 @ 171 That was also at 63 inches ...If i remember right it put down 265 on the dyno . The bike doesn't have and light weight wheels or trick parts either ..
Damn im getting good at the power calculator and guessing the shot size on some bikes lol
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
  
|
Maxspeed
Novice Class
Addicted to SPEED
Posts: 95
|
posted January 28, 2010 04:23 AM
My shot is no where near a 70 shot and I am still useing a dry shot. Still running factory wheels they are just painted
____________
2008 Hayabusa aka. MADMAX
orange/black
1/4-7.**@18*mph
1/8-5.**@14*mph
|
Shane661
Needs a life
Posts: 11494
|
posted January 28, 2010 05:34 AM
Maxspeed, what do you weigh and how does the bike compare #'s-wise, with you on it?
|
Maxspeed
Novice Class
Addicted to SPEED
Posts: 95
|
posted January 28, 2010 05:43 AM
I weigh 240 lbs unsuited and anywhere from 2-3 tenth difference
____________
2008 Hayabusa aka. MADMAX
orange/black
1/4-7.**@18*mph
1/8-5.**@14*mph
|
Shane661
Needs a life
Posts: 11494
|
posted January 28, 2010 05:45 AM
Is your bike stripped down at all? Stock panels, headlight, etc?
|
Maxspeed
Novice Class
Addicted to SPEED
Posts: 95
|
posted January 28, 2010 05:49 AM
Mph tends to drop 4-5mph. This is also compared to my 174 lb rider. If i can get nooby who weighs 130 something plus has really good short times I believe it could cut some 8.10s
____________
2008 Hayabusa aka. MADMAX
orange/black
1/4-7.**@18*mph
1/8-5.**@14*mph
|
Shane661
Needs a life
Posts: 11494
|
posted January 28, 2010 05:52 AM
 Edited By: Shane661 on 28 Jan 2010 13:53
That's really stout, no doubt.
I'd like to see some 14's run with your bike.
|
SteddyTeddy
Pro
Posts: 1664
|
posted January 28, 2010 06:14 AM
I ran an 07 Busa at Valdosta that was running high 8.20's low 8.30's at that same MPH. They said it had an 08 crank and I believe a 40 or 50 shot. Kid was only 120 to 130 llbs though.
|
Maxspeed
Novice Class
Addicted to SPEED
Posts: 95
|
posted January 28, 2010 06:33 AM
The bike has factory plastics . I have taken off a couple of uneeded things .but I am still running all my lights. My bike rider weight with me on it 733lbs this was when I was weighing in at 225lbs
____________
2008 Hayabusa aka. MADMAX
orange/black
1/4-7.**@18*mph
1/8-5.**@14*mph
|
Shane661
Needs a life
Posts: 11494
|
posted January 28, 2010 06:46 AM
Sounds like about 490 lbs of bike, still pretty light compared to stock. 
|
06redzx14
Pro
Posts: 1022
|
posted January 28, 2010 07:10 AM
Originally Posted by maxspeedsti
So what can 275 hp get you on a well setup 08 busa sitting at 63 in and 650lb bike rider combo ?
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
Nelson Taylor
Zone Head
Posts: 927
|
posted January 28, 2010 09:34 AM
Thats moving on stock internals.....Congrats
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
smokinZX14
Needs a life
Posts: 10197
|
posted January 28, 2010 09:38 AM
quote:
Thats moving on stock internals.....Congrats
He has stock rods and pistons but is is about all that stock ..He's got head work and some cam switching going on ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted January 28, 2010 09:38 AM
Nelson....... long time no see....... er...... hear from....... er....... see you post 
|
smokinZX14
Needs a life
Posts: 10197
|
posted January 28, 2010 09:39 AM
He really likes to play down his mods ... I wish he would come clean and list all his mods ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Nelson Taylor
Zone Head
Posts: 927
|
posted January 28, 2010 09:52 AM
quote:
Nelson....... long time no see....... er...... hear from....... er....... see you post
Thanks,
Had a son last year, and in the process of moving this weekend... So I've been sitting still for a minute and just lurkin'... I like chime in when something sounds interesting or I can learn something new...
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
Nelson Taylor
Zone Head
Posts: 927
|
posted January 28, 2010 10:01 AM
I hear ya on that mods Smokin'.... MaxSpeed thats some good mph for a dry shot.
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
Maxspeed
Novice Class
Addicted to SPEED
Posts: 95
|
posted January 28, 2010 10:47 AM
Not saying everything is not being dishonest. Stock rods stock pistons stock cam , aftermarket valves, airbox mod , sprockets,the bike is tunned thru the ecu ( which in my opinion is well worth a few hp) and a mild dry shot . In fact I almost 300 passes on one set of factory clutches . The bike is ridden 6 days a week .
____________
2008 Hayabusa aka. MADMAX
orange/black
1/4-7.**@18*mph
1/8-5.**@14*mph
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted January 28, 2010 10:50 AM
Sounds like a head job on an otherwise stock engine. Is that correct? What about head gasket?
|
Maxspeed
Novice Class
Addicted to SPEED
Posts: 95
|
posted January 28, 2010 10:57 AM
I spent a lot of time picking every mod I have done to my bike. Many late nights reading forums on. things that work. I feel everyone should do the same research. I don't want to list everything and give anyone a free Manual to get to the. Low 8s.plus I race for money very often , so its in my best intrest to keep my mouth shut. But when the bike hits 7s I will post it up everywhere.
____________
2008 Hayabusa aka. MADMAX
orange/black
1/4-7.**@18*mph
1/8-5.**@14*mph
|
Nelson Taylor
Zone Head
Posts: 927
|
posted January 28, 2010 11:14 AM
You definitely have done your homework..... I need my stock 14 to run strong like that.... Hip to the game..... you can email me :-) Im no where near you if your racing this time of year.
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
LAB3
Needs a job
Posts: 2977
|
posted January 28, 2010 11:49 AM
Edited By: LAB3 on 28 Jan 2010 23:06
quote:
I spent a lot of time picking every mod I have done to my bike. Many late nights reading forums on. things that work. I feel everyone should do the same research. I don't want to list everything and give anyone a free Manual to get to the. Low 8s.plus I race for money very often , so its in my best intrest to keep my mouth shut. But when the bike hits 7s I will post it up everywhere.
Seen the old bumber sticker................. All fisherman are Liars..... Except You and Me
And Sometimes I Wonder About You. :-) Most are telling all, but some make you wonder
Cheers to you, Fast Busa, seen them come and go and ALL that spray on stock pistons
that turn the 7's ends badly. Risking your life at 170 and blowing a engine is Not what
I would advise. Makes for a good read but I wish you good luck. We have so many new 14
members here that have just got their Really Fast First bike and read what it can do needs
to know even Stock a Busa or 14 Will teach you a bad lesson that some never get over.
Wait and buy new pistons and rods. Sermon is Over.... carry on.
"think" about the ....Opps.
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted January 28, 2010 12:09 PM
it doesn't really matter to him....... he has a rider!
|
kaw-rick
Pro
Posts: 1167
|
posted January 28, 2010 01:42 PM
You can ride mine nelson. I know youll go 30s on it. Its stock internals also.
|
smokinZX14
Needs a life
Posts: 10197
|
posted January 28, 2010 01:51 PM
What does all the Busa crap have to do with a zx14 ? Max we do have a Busa Zone you can post your Busa stuff in ..Max only comes here to stir up shit and no other reason ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
|
|
HOME
NEW TOPIC