johnsonzx14
Expert Class
Posts: 487
|
posted June 13, 2009 10:52 AM
Best levers for small hands?
Whats up guys, I know this is an old thread but I cant seem to find it anywhere... What are the best levers to get for small hands??
  
|
SteveWFL
Moderator
Posts: 27920
|
posted June 13, 2009 12:31 PM
 Edited By: SteveWFL on 13 Jun 2009 20:35
Pazzo's are my preferred. Some prefer their competitiors. Pazzo's I like because they will adjust almost all the way in without changing the tension setting on your cable.
Note on mine no adjustment on the factory junk levers, and then look at the Pazzo's.
"shorty" Pazzo brake lever compared with stock lever
"standard" Pazzo clutch lever compared to stock lever (still shorter than stock)
And they're eye candy for your bike too.
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted June 13, 2009 05:20 PM
I agree with Steve,
I like Pazzo too.
But honestly stick with the standerd length if you have a hard time with the lever pull, as the shorty doesn't allow more than 3 fingers at most, 2 fingers norm.
I was thinking of setting up a group buy for Pazzo.
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
reynoldss
Expert Class
Posts: 207
|
posted June 13, 2009 06:21 PM
ASV's are nice as well. Can be adjusted closer to the handle bar than the others if need be,
____________
Everybodys tyring to go green, I did years ago.
|
JDC
Zone Head
Posts: 570
|
posted June 13, 2009 07:57 PM
dubious.
I'm in for reg length!
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted June 13, 2009 08:44 PM
OK.
I will set it up a thread in the backyard garage tomorrow.
Doing one for speed cell batteries too.
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted June 14, 2009 09:41 AM
Edited By: bigdtd on 14 Jun 2009 17:42
love my pazzo levers, but as noted above their standard length is a little shorter than stock
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
johnsonzx14
Expert Class
Posts: 487
|
posted June 14, 2009 02:26 PM
Yeah, i like the look of the pazzo's too, I think I am going to go with them... Set up that buy, and ill get some..
|
butta4hc
Expert Class
Posts: 313
|
posted June 15, 2009 06:15 AM
Pazzos on mine too. Bolt right on. No fitment issues. No special fabricating to get them to work. You can also mix and match your lever and adjuster colors to suit your needs. Very nice and for a good price.
____________
Butta
Hot Commodities MC
Paterson, NJ
2006 Black ZX-14 - Recall Frame Swap, Full Muzzy GP Exhaust, PCIII, BMC Race Filter, Flies Out, Braided Front Brake & Cutch Lines, Muzzy's Radiator Fan, Engine Ice Coolant, Frame Sliders, SubFrame Sliders, Puig Dark Smoke Windscreen, Powerbronze Hugger, Cox Radiator Guard, Unswitched Powerlet Outlet under seat, Switched Powerlet Outlet On Right Duct Panel, Intergrated Tail Light, HID lights high and low beam, Blue corner marker lights, Eclipse License Plate Blackout Kit, Black Pazzo Levers, Scorpio Alarm, Lojack Theft Recovery System, Rapid Transit Triple Tree Bag, Cortech Tank, Tail & Saddle Bags and the bragging rights for being "The Fastest 14 In The Country" for a few weeks when the 14 made it's debut here in the states.
|
johnsonzx14
Expert Class
Posts: 487
|
posted June 15, 2009 05:29 PM
hook up that group buy... I want somee
|
johnsonzx14
Expert Class
Posts: 487
|
posted June 16, 2009 02:43 PM
where is the best place to get them?? I need some asap...
|
WindSwordNinja
Expert Class
Posts: 203
|
posted June 16, 2009 03:26 PM
I have the long one for the clutch, and the short one for the brake.
They are great!
When I bought mine they were offering free engraving on the clutch lever.
____________
2014 ZX14 Black and Green
2008 ZX14 Black and Red SE
1986 ZX1000R Black
"Faster, faster! Faster would be better!" (Serenity)
|
SteveWFL
Moderator
Posts: 27920
|
posted June 16, 2009 08:14 PM
quote:
I have the long one for the clutch, and the short one for the brake.
They are great!
When I bought mine they were offering free engraving on the clutch lever.
+1
All my bikes are set up that way. clutch long, brake shorty.
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted June 16, 2009 11:23 PM
I m working out the best pricing I can with Pazzo, but surely would NOT be able to get them to you stateside in less than a week...
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
johnsonzx14
Expert Class
Posts: 487
|
posted June 17, 2009 01:50 PM
thats cool, thanks though
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted June 17, 2009 02:08 PM
I have a set of shorty's in black, and natural aluminum finnish, ready to go.
I worked out the pricing today and listed the group buy,
Those could go out tomorrow, depending on your location 5-9 business days to ship.
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
SteveWFL
Moderator
Posts: 27920
|
posted June 17, 2009 02:09 PM
quote:
thats cool, thanks though
at the prices he's offering these Pazzo's for, it may be well worth the wait
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
|
|
HOME
NEW TOPIC