northmedic

Expert Class
Posts: 384
|
posted August 08, 2007 07:36 PM
SO today i decided to pull the screen off and flush it i was shocked to find it half plugged with black silicone sealant from Kawasaki , was not impressed now wondering if i have starved my bike of oil flow my dealer has ordered a new screen under warrenty but i am concerned of hidden damage . any thoughts
|
smokinzx14

Needs a life
Posts: 10197
|
posted August 08, 2007 07:44 PM
quote: SO today i decided to pull the screen off and flush it i was shocked to find it half plugged with black silicone sealant from Kawasaki , was not impressed now wondering if i have starved my bike of oil flow my dealer has ordered a new screen under warrenty but i am concerned of hidden damage . any thoughts
You should be ok ... That stuff would have a hard time making it passed the screen ...If any did it be so small it would not do much damage ... It goes right to the oil filter first anyway ....Might want to cut your oil filter apart and take a look see ...Smokin...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
northmedic

Expert Class
Posts: 384
|
posted August 08, 2007 07:47 PM
The silicone was on both sides of the screen my bike has near 11000 km on it now 6 oil changes on it in that time
|
burnout

Expert Class
Posts: 216
|
posted August 10, 2007 09:53 AM
Brock recently post in his forum about Mobil 1 syn changing its formula. I'd check it out if you have access. I'd don't want to repeat what he said because I don't want to lose access, but maybe he'll chime in.
____________
1/8 5.66@129.77
1/4 8.74@159.60
|
dubious

Needs a life
Needs more time to ride!
Posts: 8442
|
posted August 10, 2007 09:59 AM
quote: The silicone was on both sides of the screen my bike has near 11000 km on it now 6 oil changes on it in that time
Both sides...
Peter, did you have the valve cover leak on yours?
Inquiring if it was another source besides factory build.
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
Nelson Taylor

Zone Head
Posts: 927
|
posted August 10, 2007 10:31 AM
quote: Brock recently post in his forum about Mobil 1 syn changing its formula. I'd check it out if you have access. I'd don't want to repeat what he said because I don't want to lose access, but maybe he'll chime in.
The guy at the part store mention something about the Mobil 1 and a recent change. I wasn't following him (I just bought it and went about my business).
|
Halvefast

Zone Head
Posts: 806
|
posted August 10, 2007 10:41 AM
Nelson that's got to be it, see alot of problems
with full syn. motorcycle oils, let alone auto oil.
Try switching to a syn blend just for this time, make sure it is bike oil!
Car oils kill a clutch due to the additive package is too slippery,
this is for fuel mileage in cars. plus it doesn't have the same anti-foaming agents.
And unles it is SG rated it doesn't have (I believe it is phousforus) which helps
with gear clash, and keeps the oil from reaking down in the tranny so fast.
Just what I have learned over the past 20 years selling bike oils
|
northmedic

Expert Class
Posts: 384
|
posted August 10, 2007 10:47 AM
Edited By: northmedic on 10 Aug 2007 11:51
My bike has never been opened other then oil changes and the recent clutch issue ( which mother kawi is covering under warrenty now as my A plate was in the wrong position it was locked in line with the rest of the plates, and as horrible as they look the steels are not warped and the other friction plates are still with in spec the a plate is the one missing the fiber .as for the silicone its from assemble they stated with no other explanation.
by the way Lyle thanks for the help with that clutch awesome !
quote:
quote: The silicone was on both sides of the screen my bike has near 11000 km on it now 6 oil changes on it in that time
Both sides...
Peter, did you have the valve cover leak on yours?
Inquiring if it was another source besides factory build.
|
|
|