HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Testing TracDynamics 6 to 10 inch over arm NEW TOPIC NEW POLL POST REPLY
smokinzx14


Needs a life
Posts: 10197
posted May 30, 2007 08:40 PM        
Testing TracDynamics 6 to 10 inch over arm

Three weeks ago i ordered a TracDynamics 6 to 10 over swing arm and it came UPS today !!! What a sweet looking arm ....I ordered it with the S/T axle adjusters that will give me a range for 64 to 70 inch wheel base .. I had them add a lower loop ( brace) and a bracket for a 2 1/2 pound N20 bottle ...

Now for testing i'm going from 64 to 66 inch wheel base for the first test...I having problems keeping the front end down on the ground at 64 on motor and even more problems on the spray ... What i'm trying is to fine the sweet spot between spinning and wheeling , so i'm going to add a few inches at a time as to not over shoot the best spot or wheel base ..

My best 60 footer at 64 inches have been 1.38 to 1.40 and i hope this swing arm will get me down into the low 1.30s like NinjaBoys zx14 ...I will get some pictures posted soon as the work comes along ...I'm thinking it will take a few test and tune days to get the thing dailed in ... As most of you know even a little change can slow you down and you will need to do some learning on how to ride the bike ...But in the end i should go faster , i'm keeping my fingers crossed ...lol....Smokin ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
SteddyTeddy


Pro
Posts: 1664
posted May 31, 2007 04:37 AM        
Well, did you run it last night?
  Ignore this member   
dubious


Needs a life
Needs more time to ride!
Posts: 8442
posted May 31, 2007 06:31 AM        
Cool.
Lee what gearing have you found to be best for your weight?
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.

  Ignore this member   
CrotchRocket


Moderator
Bracket Racing with Betsy
Posts: 8038
posted May 31, 2007 07:28 AM        Edited By: CrotchRocket on 31 May 2007 08:29
The arm sounds good Lee

What was the shipping weight on the box...

Howabout weighing the stock arm so we know the difference!!!
____________
Jason Miller StreetBike Seminars

*****DragRacers do it better, because they dont cut Corners*****

  Ignore this member    Click here to visit CrotchRocket's homepage. 
smokinzx14


Needs a life
Posts: 10197
posted May 31, 2007 11:47 AM        
quote:
Cool.
Lee what gearing have you found to be best for your weight?
So far 16/41 working great ...May try a 43 to see what happens with the longer arm.... Smokin..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
smokinzx14


Needs a life
Posts: 10197
posted May 31, 2007 11:49 AM        
quote:
The arm sounds good Lee

What was the shipping weight on the box...

Howabout weighing the stock arm so we know the difference!!!
I'll get the shipping weight later today ...I have the arm installed allready ... I have a big race Sat and i am working my butt of to have it ready ....Pictures will follow ....Smokin..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
smokinzx14


Needs a life
Posts: 10197
posted May 31, 2007 11:55 AM        
quote:
Well, did you run it last night?
5.66 @ 125 and change 1.40 60 footer .... I had a 1.38 but wheeied my way to a 5.71 @ 125 and that was at just a little over 64 inches long on motor ...... I have the bike setting at 67 inches now, i can't go any longer because Trac Dynamics forgot to send me a brake stay ..... I'm setting up the N20 tonight ... Smokin..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
Tool man


Needs a job
Posts: 4493
posted May 31, 2007 03:44 PM        
Lee.. How many runs do you have on your 14 ?? Seems like it has been very dependable. Any issuses with it ??
____________
The banks are failing..
The banks are failing...
Invest in Ammo

  Ignore this member   
smokinzx14


Needs a life
Posts: 10197
posted May 31, 2007 04:10 PM        
quote:
Lee.. How many runs do you have on your 14 ?? Seems like it has been very dependable. Any issuses with it ??
Over 500 passes and no problems yet ...Knock on wood ... lol...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
bigdtd


Needs a job
Interceptors
Posts: 4209
posted May 31, 2007 04:13 PM        
the 14 is quite a work horse
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT

  Ignore this member   
Tool man


Needs a job
Posts: 4493
posted June 01, 2007 10:05 AM        
That is 1.25 hrs of WFO abuse... nice :d
____________
The banks are failing..
The banks are failing...
Invest in Ammo

  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Testing TracDynamics 6 to 10 inch over arm NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.2070620059967 seconds processing time