tonytooth
Zone Head
Posts: 647
|
posted April 02, 2007 04:15 PM
 Edited By: tonytooth on 2 Apr 2007 17:17
I finally broke down and got nitrous.
I have been talking about it for some time. I wanted to ride the bike to it's full potential before I got the spray but it got impatient. I know the bike has a lot more in it. My goal now is to see if I can get into the 8's stock wheelbase. My last bike was stretched and I told myself I wanted to see what I can accomplish without stretching it. We'll see, wish me luck.
BTW, I figured I would share where I got the kit from. I am in no way affiliated with this company I just found them on Ebay and called them up. The guy is very helpful and the prices are great. I ordered it friday and I already have it in hand. Once I receive the bottle bracket from Muzzy then I can install it. I will update this thread with pics along the way.
I wasn't able to buy there dual bottle system (very nice) since I have a high mount pipe and I have aftermarket foot peg brackets. I may have tried it otherwise. That system has 2 quick release bottles for fast filling. Check it out.
http://www.dynotunenitrous.com
WOW, I just went there to copy the link and SmokinZX14 is on the front page, cool!
Fish, I promise this isn't spam. I was surprised as anyone to see his pic up there.
____________
MySpace
   
|
smokinzx14
Needs a life
Posts: 10197
|
posted April 02, 2007 04:50 PM
I should note that i am using their N20 kit....>> But I DID NOT send them the picture to post !! I had to pay retail for kit ...I have Emailed them about this But i'm thinking there is little i can do about it ...The photo is all over the internet so i guess it's a free for all at this point .. Smokin....
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
tonytooth
Zone Head
Posts: 647
|
posted April 02, 2007 04:54 PM
Sorry about that Lee I wasn't aware they were going to post your pic either. I agreed he could use any pics of my bike but I guess it would be best for him to clear your pics with you first. I'll shoot him an email explaining.
____________
MySpace
|
smokinzx14
Needs a life
Posts: 10197
|
posted April 02, 2007 05:00 PM
No problem Tony you didn't do anything wrong...But DynoTune should have asked me first and offerd a free kit or something to use the picture ... ...Smokin...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
raband
Expert Class
Posts: 121
|
posted April 02, 2007 05:00 PM
quote:
I should note that i am using their N20 kit....>> But I DID NOT send them the picture to post !! I had to pay retail for kit ...I have Emailed them about this But i'm thinking there is little i can do about it ...The photo is all over the internet so i guess it's a free for all at this point .. Smokin....
Like hell it is - if they are using you in their advertising for their monetary gain then you have a right to be pissed about it.
Companies sponsor people to enable them to do this - if they are hoping to sell more product by cashing in on your efforts and skill then it's obvciously worth something to them. They're a commercial outfit - send them your invoice for using your image and reputation. Let them know that it may be in their interests to either make a commercial or at least gentlemans agreement with you if they want to continue to use you.
____________
PS - its black - its f'kn sexy and it pulls better than a dentist
|
tonytooth
Zone Head
Posts: 647
|
posted April 02, 2007 05:03 PM
It's my fault, he wanted to see pics of our bikes and I sent him pics of both. I gave him the ok to use any of my pics but I should have been clear about Lee's pics. He is a really nice guy and I'm sure he will resolve this very soon. It's not his fault.
____________
MySpace
|
smokinzx14
Needs a life
Posts: 10197
|
posted April 02, 2007 05:26 PM
Looks like they have removed my picture from their website... That's ok .... They still make a great N20 kit and well as having great pricing... Smokin...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
tonytooth
Zone Head
Posts: 647
|
posted April 02, 2007 06:12 PM
Edited By: tonytooth on 2 Apr 2007 19:13
Now that we got that cleared up, check out these videos showing the dual bottle system. I think it makes for a nice clean street friendly setup. I wish I could have it.
http://www.dynotunenitrous.com/store/ProdImages/GOOD_ZX_14_VIDEO.AVI
http://www.dynotunenitrous.com/store/ProdImages/BOTTLE_REFILL.AVI
Anyone know how to embed these videos in the post using BBcode instead of posting the link itself? Not sure if this board supports embedded avi's it but I figured I ask. Please share the code if you can.
|
Nelson Taylor
Zone Head
Posts: 927
|
posted April 02, 2007 06:26 PM
Go for it Tony I like idea of an 8sec stock wheelbase bike as well.
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
tslewisz
Expert Class
Posts: 328
|
posted April 03, 2007 12:30 PM
You guys putting the nozzles in the ram air tubes or doing something else?
|
kawasaki_rick
Zone Head
Posts: 512
|
posted April 03, 2007 12:42 PM
I put a 2 nozzle set-up on mine. Put 1 nozzle in each of the aluminum frame covers.The 1s you take out 2 remove the flies. Havent tried em yet, but should kick hard. Oh also i faced them forward 2 try 2 spread the nitrous evenly.
|
tonytooth
Zone Head
Posts: 647
|
posted April 03, 2007 01:05 PM
I was planning on putting them in the ram air tubes.
____________
MySpace
|
stevewfl
Moderator
Posts: 27920
|
posted April 03, 2007 08:42 PM
Awesome!
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
tonytooth
Zone Head
Posts: 647
|
posted April 11, 2007 11:46 AM
Here are some pics of the kit installed.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
|
zxbob
Pro
Posts: 1692
|
posted April 11, 2007 12:44 PM
I set up this 25hp shot on my wifes bikes useing the existing tube that discharges
top and center of the throttle bodies.
Bob
|
tonytooth
Zone Head
Posts: 647
|
posted April 11, 2007 12:54 PM
Edited By: tonytooth on 11 Apr 2007 13:57
Lee told me that you did that. I like that idea. It looks great. My only concern is how well the nitrous is being dispersed. Are you at all concerned that more nitrous may be getting to the center cylinders vs. the outside ones? Just curious cuz I may end up going that route myself. I am using a 40 shot so I was trying to get it dispersed at even as possible.
Have you looked at the plugs to see if they all look simular?
None the less, that is very clean and sneaky, I love it! Your bike is beautiful as well Bob.
____________
MySpace
|
zxbob
Pro
Posts: 1692
|
posted April 11, 2007 12:58 PM
I have not checked the spray pattern ..... but now may be a good time since its down
for her paint .... I'll look and then post again.
Bob
|
zxbob
Pro
Posts: 1692
|
posted April 11, 2007 06:48 PM
I have never seen a "dry system" plumbed in front of the air filter.
Are you planning to remove it ?
Bob
|
smokinzx14
Needs a life
Posts: 10197
|
posted April 11, 2007 07:08 PM
quote:
I have never seen a "dry system" plumbed in front of the air filter.
Are you planning to remove it ?
Bob
My system is in front of the air filter ....Seems to work 8.56 in the 1/4 mile.. But i'm goning to try something different to see if it goes faster ....
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
nightmare
Pro
ACP Racing
Posts: 1797
|
posted April 11, 2007 07:51 PM
Edited By: nightmare on 11 Apr 2007 20:52
Hey! My set up is nothing like that! But it really hits hard and instantly!
____________
2006 ZX14 Ninja "SWINE FLU"
60ft 1.23
8th Mile 5.16
ACP Racing
|
tonytooth
Zone Head
Posts: 647
|
posted April 11, 2007 09:33 PM
Bob,
I may remove it sometimes but I don't think it's necessary. I am really wanting a BMC race filter. Those things are only used for stopping birds from getting in your motor. I wouldn't think it would hinder the nitrous at all infact it may help even out the spray some more. If I decide I want it to hit hard and fast I may seriously consider putting it where you have it. For now, slow and easy is what I need to keep the front wheel on the ground.
Nightmare,
I am trying to avoid it hitting hard and instant since I am stock wheel base. I can always change it later if need be.
____________
MySpace
|
tonytooth
Zone Head
Posts: 647
|
posted April 11, 2007 09:34 PM
Lee, what are you going to try out? Are you moving the outets?
____________
MySpace
|
bishopzx12
Zone Head
Posts: 517
|
posted April 12, 2007 06:22 AM
Now thats a nice nitrous system. i think i am sold on this kit instead of the muzzy kit.I have one question though how would you put an air shifter in conjunction with this kit. I mihgt order an airshifter from muzzy and see if i can tie it all in together some how. Any inputs. Do you think that system can use a t fitting and run another line to an airshifter
____________
1996 ZX7R
1999 ZX9R
1999 ZX11
2000 ZX12R 1270
2002 GSXR 1000 "I was Drunk"
2003 ZX12R 1375
2006 ZX14
2012 ZX14R
|
tonytooth
Zone Head
Posts: 647
|
posted April 12, 2007 06:28 AM
Smokin is the guy you want to talk to about that. He is planning on using his nitrous for his air shifter as well.
____________
MySpace
|
bishopzx12
Zone Head
Posts: 517
|
posted April 12, 2007 07:04 AM
Smokin what do you think how feasible will this be. I know i really need and want to incorporate an airshifter
____________
1996 ZX7R
1999 ZX9R
1999 ZX11
2000 ZX12R 1270
2002 GSXR 1000 "I was Drunk"
2003 ZX12R 1375
2006 ZX14
2012 ZX14R
|
|
|
HOME
NEW TOPIC