bkrfstmn
Novice Class
Posts: 58
|
posted March 15, 2003 08:10 AM
gee Dan, you don't have a clue who i hang with. In reality i'm a loner, but, i have never even seen a busa without a pipe. At the all bike drags here last summer there were 7 busas and all were modded quite a bit. Only one was quicker than me and one more was real close but he weighs 300 or so. You must have had the fastest stock busa in the country, congratulations. Or you are really full of shit!!!!!
  
|
kawachan
Pro
Posts: 1031
|
posted March 15, 2003 08:36 AM
Dan, I think you were at Red River. Your bike is not quite stock if it runs 150...or 9.30
____________
RED NINJAS RULE!!
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 15, 2003 09:23 AM
Dan you have that Frank adams arm don't you. come on now man I have raced agenst you. we are talking no mods, here. just lowered. and your not a skinney guy either are you? not TFA but still you go what about 180 or so?
____________
200-MPH CLUB MEMBER!
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 15, 2003 09:24 AM
Oh and OKB(Dan) your forgot to tell everyone! Bristol is way! way! up there on the sea level chart!!!
Mad Mike
____________
200-MPH CLUB MEMBER!
|
Dan Sanders
Novice Class
Posts: 34
|
posted March 15, 2003 10:10 AM
 Edited By: Dan Sanders on 15 Mar 2003 11:31
Ok Guys, When I ran 9.70s I had stock pipes, stock airbox,with the BDE clutch mod, 16/40gears, stock swingarm, and lowered.
When I ran the 9.26@150.64 I had, BDE/Hindle pipe, small airbox mod, PCII with Brock's map, MTC inner clutch hub, MCR2 tire, air shifter, 17/45 gears and 6 over arm. The engine is stock bore with stock pistons, stock head, stock throttle bodies.
My quickest times were run at RedRiver raceway at Shreveport, LA. One of the best tracks in the country, flat and is at nearly sealevel.
bkrfstmn, Come to Shreveport and find out if I am full of shit. Just because you have never seen it does not mean it did not happen.
Like I said before, ask RedElk if you don't believe me.
You are right I don't know who you hang with. Please accept my apology for my silly remark.
|
BA
Pro
Posts: 1592
|
posted March 15, 2003 02:19 PM
well with a 6" arm, ...it's a whole different story now isn't it??
btw,....all this nonsense using the word "stock" is sometimes too much to bear. I'm sure we all have a slightly different point of view on that.
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 15, 2003 04:43 PM
LOL.. shit mine is still stock....
Mad Mike
____________
200-MPH CLUB MEMBER!
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 15, 2003 04:44 PM
Dan you got you a set of Ryan Schnitz invisible wheelie bar's eh.... come on now man don't lie....... LOL
____________
200-MPH CLUB MEMBER!
|
Dan Sanders
Novice Class
Posts: 34
|
posted March 15, 2003 05:30 PM
Why do you guys find it so hard to beleive I ran a 9.70 with nothing but a one tooth smaller sprocket on the front and lowered. I have seen many Busas and 12s run that good set up the same way. I have also seen guys with $2000 worth of mods run 10.00. I have no reason to BS you guys.
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 16, 2003 08:42 AM
Dan it is a joke dude!! get a grip. the only way I would not believe you was if you told me you weighed 190lb or more.....do you understand that LOL means Laughed Out Loud.......... come on now ease up this board is for a good time not everyone is serious. so what did you run before you lowered it? what were your 1/8thmile times? and have I ever raced with you before???
____________
200-MPH CLUB MEMBER!
|
Dan Sanders
Novice Class
Posts: 34
|
posted March 16, 2003 10:38 AM
I never ran it before I lowered it.
We made a time trial together at Bristol lasr year. I don't think we ever actually raced against each other.
My best 1/8 time is 6.003
I'm not serious. And I am not the one that suggested someone might be full of shit. Is that a joke to you? Not where I come from.
|
bkrfstmn
Novice Class
Posts: 58
|
posted March 16, 2003 10:50 AM
hahahahahahahahaha, only you know for sure
|
Dan Sanders
Novice Class
Posts: 34
|
posted March 16, 2003 01:42 PM
bkrfstm,
Which all-bike races do you attend? It seems in these few post we have started a little rivalry . Let's have go at it. You up for it?
|
bkrfstmn
Novice Class
Posts: 58
|
posted March 16, 2003 02:06 PM
i'll admit that you are way too fast for me, but if i could find a couple bikes not too far away i would be glad to have a little grudge match. Also, all that i've done is 1 inch lower in rear, strap front, and regear. I have a brother-in-law that lives near Harrison, wheres the closest track from there? I could visit him and bring the scoot to play.
|
Dan Sanders
Novice Class
Posts: 34
|
posted March 16, 2003 02:15 PM
I am going to try and make one Texas Shootout race. Not sure which one yet. I am going to all the PMRA races in OK. City.
I will let ya know when I make a decision on the TX SO.
You run good times. My next door neighbor has a 12. It's strong as hell.
|
bkrfstmn
Novice Class
Posts: 58
|
posted March 16, 2003 02:47 PM
your, profile says Little Rock, any tracks around there so i can have an excuse to get out of Iowa?
|
Dan Sanders
Novice Class
Posts: 34
|
posted March 16, 2003 03:25 PM
There are a couple of 1000ft tracks. One in Centerville and one in Presscott. Kinda small outlaw tracks. I like going to Memphis or Shreveport. You should come to the PMRA race on April 12 in OK City. Great race. Great track There will be 5 or 6 of us from Little Rock running in Street ET. Maybe one in Street Bike Shootout. Come on down. They run T&T on Friday night.
|
bkrfstmn
Novice Class
Posts: 58
|
posted March 16, 2003 03:38 PM
i don't get to any of the real races, i just like to get to a track a few times a year to hone my skills a little bit. Thought i might visit bro-in-law near you and race the same weekend
|
DR JOE
Expert Class
Posts: 352
|
posted March 17, 2003 05:00 PM
Hey Dan were you at any of the PMRA races last year? If so I should know you, I announce at all the PMRA races and raced Street E/T all last year.
DR JOE
|
MadMike
Moderator
FEAR THE BLACK FLAG!!!!!!!!
Posts: 6579
|
posted March 17, 2003 05:54 PM
Hey Joe Hope to be In Witicha at least look for the Interstate Bike!!!
Mad Mike
____________
200-MPH CLUB MEMBER!
|
DR JOE
Expert Class
Posts: 352
|
posted March 18, 2003 11:46 AM
I'll be on the green ZX12 and in the tower come by and say "Hi" if I don't see you first and run.......HAHAHAHAHAHA...Just kidding
Looking forward to meeting you.....
DR JOE
|
Dan Sanders
Novice Class
Posts: 34
|
posted March 20, 2003 01:24 PM
I raced at the Finals in OK. City. I'll be there on April 12
|
bkrfstmn
Novice Class
Posts: 58
|
posted April 30, 2003 04:38 PM
ok guys, some of you posted that you used to be in the nines with no pipe, thats cool, now who's still doing it that way, i want to send out some special t-shirts for those who still qualify
|
oldkawboy
Needs a job
Posts: 2125
|
posted April 30, 2003 06:27 PM
Not me. I finally broke down and bought a pipe before going to Maxton last year.
To be honest, it was more fun with the stock pipe 'cause with a pipe, everyone expects you to go fast.
I just hate seeing something so big and ugly....besides myself.
Dan
|
BA
Pro
Posts: 1592
|
posted April 30, 2003 07:15 PM
LOL @ Dan! 
Hey, I still have my stock pipe on a shelf! If I put it back on for some video at the track do I get a shirt?!?! hehehe (I've always wanted to do that anyway to see what she'd do for ET)
|
|
|
HOME
NEW TOPIC