woppi
Pro
Posts: 1362
|
posted May 28, 2008 04:40 AM
Okidoki - take a look ???
#
woppi´s next work to finish !!!
new fuel tank -- til now -- not ready ----
my half tank + stock seat has to go !!
want mount the new fuel tank -- under the stock tank cover !
have to build a new seat -- on the rear frame
tell me your arguments ??
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
  
|
entropy
Moderator
Posts: 8671
|
posted May 28, 2008 08:48 AM
so you are going to keep the tank cover, have yr gas cap in the same place, be able to sit lower?
____________
This moderator uses moderation in moderation
|
woppi
Pro
Posts: 1362
|
posted May 28, 2008 12:29 PM
@entropy
yes,yes,yes !!! stock tank cover ---- under it -- covert -- the new tank + have to build a new seat !! still comming !! gas cover at the same place as the stock tank !!!!!!!!!!
want sit at the rear frame !!! i think 4-5" lower as the stock seat ??
other pics are comming !! ?? !! need more time to build !!!!!!
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted May 28, 2008 04:38 PM
I would love to have a lower seat........., catalyst is as low as they go, but I am anxious to see what this looks like.......
woppi, confirm with me in an email about your clutch before you go to the track...........
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
woppi
Pro
Posts: 1362
|
posted May 28, 2008 10:34 PM
!!!!!!!!!
quote:
I
woppi, confirm with me in an email about your clutch before you go to the track...........
@NOX
okidoki !!
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
kawabunga
Expert Class
Cogswell Cogs Installed
Posts: 284
|
posted June 01, 2008 08:45 AM
Here's the 2 qt. fuel cell on my 14...not running the stock tank or shell.
|
kawabunga
Expert Class
Cogswell Cogs Installed
Posts: 284
|
posted June 01, 2008 08:46 AM
Here's the 2 qt. fuel cell on my 14...not running the stock tank or shell.
|
zxboy
Expert Class
Posts: 292
|
posted June 01, 2008 05:02 PM
Kawabunga, How about some details on your tank install.....What did you use for a pump, how did you do the return line ?? ETC... Do you have any pics of the tank removed. Sorry Woppi for the thread highjack....
|
woppi
Pro
Posts: 1362
|
posted June 02, 2008 12:53 AM
@kawabunga
good idea !!!!!!!!!!!!!!!!!
@zxboy
no problem !!!!!
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
VincentHill
Needs a life
Posts: 6520
|
posted June 02, 2008 08:46 AM
That is about what Velocity Racing did to the Bear ZX14! I also noted the "Muzzy" 4-2-1 Sidewinder that was not made until Brock had Hindle make them first.
Personally I would have made a tank that fit UNDER the frame rails and removed the Cover for Serious getting down low!
____________
Made History @ Daytona and still one fast old man!!
|
zrxdean
Needs a job
Posts: 2225
|
posted June 02, 2008 10:10 AM
That things looks pretty badass. Has it gone down the track yet?
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted June 02, 2008 02:20 PM
I thought that was a Brock pipe with a Muzzy logo on it VH!!!!!!! LOL
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
stuart racing
Zone Head
N.H.R.A . Dragracing.
Posts: 999
|
posted June 03, 2008 04:30 PM
Woppi,good job..Can`t wait to see it finished....
Kawabunga, WOW thats a smooth job...Verry sleek...Is it a topend bike or 1/4 mile rocket...???
Good jobs from both...
Paul...
____________
Life in the Fast Lane..........
|
kawabunga
Expert Class
Cogswell Cogs Installed
Posts: 284
|
posted June 04, 2008 04:22 PM
The bike is set up for 1/8 mile right now Stuart because of available tracks close by. I will be dropping a stand alone 1530 stroker in it soon for the 1/4, then building this motor for a stage II turbo.
|
zrxdean
Needs a job
Posts: 2225
|
posted June 04, 2008 06:28 PM
Niiiiice. Have you had a clean pass yet?
You know, this bike might justify it's own thread... sorry woppio.
|
entropy
Moderator
Posts: 8671
|
posted June 05, 2008 01:59 AM
very clean looking bike
Apparently you pulled the radiator out of the system???
____________
This moderator uses moderation in moderation
|
kawabunga
Expert Class
Cogswell Cogs Installed
Posts: 284
|
posted June 09, 2008 03:30 PM
Our first pass and Lee's first time on the bike was a 5.79 @ 122mph @ Shadyside Raceway's 1/8 mile on 87 octane pump regular . Bone stock engine...valve cover never removed, 1500 miles on motor.
Running a minimal cooling system. There is Evans NPG+ in the water jackets to keep the heat from spiking. We warm the motor to one cooling bar, burnout, stage, run, shut off after the traps and tow or coast back. We will have 3 bars showing at that time. Let her sit for 30 minutes and we are ready to go again. We are using an inline automotive fuel pump for a 96 Grand Marquis, works perfectly. The bike is 65" running the Shinko slicks front and rear. We have no wheelie issues at all. Lee is laying down 1.3 60' times, with 3.85 330's. The bike did remarkably well for first time out. I will be massaging it front to back. We all feel there is 3-4 tenths left on the table. Our goal with the stock motor after massaging will be 5.3 - 5.4 @ 136 mph or better. After we attain our goal with the stock motor we will then spray it before moving on to the 1530 stroker, final phase will be a stage 2 turbo.
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted June 09, 2008 04:22 PM
Yeah, you have a lot left........
We are getting those 330 times with a 240 lb suited rider, on a normal 14, without it being all cut up, with a mild Nox multistage tune up......., with mid .1.4s.........
Sounds like he is bogging the heck out of it past the 60 ft time like most guys do........
60 ft means nothing if 330 does not go with it.........
How much are you bottle feeding it?
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
kawabunga
Expert Class
Cogswell Cogs Installed
Posts: 284
|
posted June 09, 2008 04:30 PM
No bottle feeding at this time. That's next
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted June 10, 2008 05:52 AM
Still, unless you are VERY high altitude, something is hurting you bad with those 330s.
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
VincentHill
Needs a life
Posts: 6520
|
posted June 10, 2008 09:22 AM
quote:
I thought that was a Brock pipe with a Muzzy logo on it VH!!!!!!! LOL
Remember, After Hindle made the 4-2-1 Sidewinder, EVERYONE Started making them! Note the Spring location. Brock Hindle do not have theirs in that location!
____________
Made History @ Daytona and still one fast old man!!
|
woppi
Pro
Posts: 1362
|
posted June 13, 2008 12:13 AM
#
my new aluminium fuel tank is finished + mounted !!
new pics are comming !!!
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
woppi
Pro
Posts: 1362
|
posted July 10, 2008 03:42 AM
#
Update:
Drag Seat is comming next !!!!
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
entropy
Moderator
Posts: 8671
|
posted July 10, 2008 03:49 AM
 Edited By: entropy on 10 Jul 2008 04:51
woppi,
VERY cool!!!!
Q: your gas tank vent, does it have any special valve on it or is it simply open to the atmosphere?
____________
This moderator uses moderation in moderation
|
woppi
Pro
Posts: 1362
|
posted July 10, 2008 04:00 AM
@entropy
Okidoki:
the left one ( line with green tape ) is the stock return valve fuel line !! year 00 / 01 use this
the right one (bland line ) is open for the atmosphere
fuel tank holds with the stock fuel pump inside 5,5 litre ==== 1,5 gal ??
next to build ----- drag seat !!!!
can sit ---- 4" - 5" lower !!!!!!! jey,jey,jey
woppi
____________
1st TFA Member / Austria !
" if it has wheels or titts - sometimes you will get troubles "
2000 Limited ZX12R NOS
|
|
|
HOME
NEW TOPIC