DaveO
Parking Attendant
Posts: 4
|
posted January 18, 2005 05:04 PM
Entropy,
Your ECM is done and should be in Johnny's hand by the time you read this. Also your pipe went out next day today. I will be in touch with JC for the results...have fun this weekend.
The ECM mod is a hardware change. It raises the limiter on the 12 by 5%. It also leans it out 5%, and advances timing ~ 2 degrees. It is very benficial to modified engines.
The question about power increasing into the "extended" rpm's depends TOTALLY ON YOUR SETUP AND TUNING. On a properly setup/tuned engine it will increase performance...guaranteed...this is no way it cannot ....esp in racing applications.
Any other questions please email me.....fzr007@aol.com
Thanx
Dave
  
|
osti33
Needs a job
Posts: 2973
|
posted January 18, 2005 05:16 PM
quote:
Also your pipe went out next day today. I will be in touch with JC for the results...have fun this weekend.
Ent, You holding out on us??
|
johnnycheese
Pro
Posts: 1008
|
posted January 18, 2005 05:26 PM
I say nothing
____________
Builder and tuner of some of the fastest N.A. and P/A Hayabusas and ZX12 /14 in Texas
|
bossman12r
Zone Head
Posts: 513
|
posted January 18, 2005 06:27 PM
A sidewinder and an extended rpm ECU, hmm sounds like a HH/60" contender!
____________
gen 4 zx10 is fast
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 18, 2005 07:08 PM
Dave O..... has this mod been popular so far?
Will be doing mine in about 1 week or 2.
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
canadamaxxer
Pro
Posts: 1090
|
posted January 18, 2005 08:10 PM
What's the cost for this mod??
|
DaveO
Parking Attendant
Posts: 4
|
posted January 18, 2005 08:25 PM
Turbo,
This mod has been very popular with the Busa's and 1K's.....It is just starting to take off on the 12's....as people are realizing it's benefits, esp on built motors.
It is $200 TYD for board members.....Thanx for the interest.
Dave
|
canadamaxxer
Pro
Posts: 1090
|
posted January 18, 2005 09:40 PM
Is this mod available for all years of 12R's? Mine are 2000 models....
|
entropy
Moderator
Posts: 8671
|
posted January 19, 2005 03:24 AM
DaveO, Thanks for the zippy turnaround!
Ry, no holding out 
the pipe thing just came up fast. Yesterday, just as i was heading out to the airport, Brock called and asked if i wanted to dyno the pre-production BDE sidewinder. Fuk yeah! I should get the pipe today when i get back to Space City and i'll bring the heap & SW to JC on Fri or Sat.
JC'll mount the modded ECU n' do any tuning necessary, then we'll mount the BDE SW and put on ear protection...
This is gonna be COOL!!!
Thanks to DaveO, Brock, JohnnyCheese. These guys ROCK!!!!
____________
This moderator uses moderation in moderation
|
osti33
Needs a job
Posts: 2973
|
posted January 19, 2005 07:34 AM
quote:
Ry, no holding out
the pipe thing just came up fast. Yesterday, just as i was heading out to the airport, Brock called and asked if i wanted to dyno the pre-production BDE sidewinder. Fuk yeah!
This is gonna be COOL!!!
NICE!! Does this mean he is going to get started on the pan next??
|
DaveO
Parking Attendant
Posts: 4
|
posted January 19, 2005 07:46 AM
canadamaxxer ,
I believe the Ca models to be the same hardware....which means they can be done. The ECM should say "denso" on it.
Dave
|
canadamaxxer
Pro
Posts: 1090
|
posted January 19, 2005 02:06 PM
DaveO:
The bike I want to get done is a US bike, but it's a 2000 model year...will this mod still works?
|
DaveO
Parking Attendant
Posts: 4
|
posted January 19, 2005 03:02 PM
canadamaxxer ,
Mod works fine on 00 models....
Dave
|
entropy
Moderator
Posts: 8671
|
posted January 20, 2005 03:01 AM
 Edited By: entropy on 20 Jan 2005 03:36
quote:
NICE!! Does this mean he is going to get started on the pan next??
As soon as he gets the parts i'm sending him, Brock will talk to his fab guy and see what it'll take to engineer & cut the pan. He's a bit concerned about whether there is a sufficient market for them, but will do the fab estimate in any case.
Last night I got home to a box fulla pipes from Brock.
ooooo-la-la
tapered header pipes are not bling-bling pretty, they are precision industrial MEAN!!!
____________
This moderator uses moderation in moderation
|
osti33
Needs a job
Posts: 2973
|
posted January 20, 2005 08:39 AM
quote:
quote:
NICE!! Does this mean he is going to get started on the pan next??
As soon as he gets the parts i'm sending him, Brock will talk to his fab guy and see what it'll take to engineer & cut the pan. He's a bit concerned about whether there is a sufficient market for them, but will do the fab estimate in any case.
Last night I got home to a box fulla pipes from Brock.
ooooo-la-la
tapered header pipes are not bling-bling pretty, they are precision industrial MEAN!!!
Sounds good to me.
|
bossman12r
Zone Head
Posts: 513
|
posted January 20, 2005 02:44 PM
Well I paln on getting the ECU mod done on my 02. Get you can't beat a Busa just get the saem mods as one 
____________
gen 4 zx10 is fast
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 20, 2005 03:05 PM
Dude... where do these folks think there is "not" a market for ZX12 drag parts??
Fack... you can buy a used ZX12 for $4500 nowadays... the perfect price for modifying!
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
Johnnycheese
Pro
Posts: 1008
|
posted January 20, 2005 03:27 PM
quote:
Dude... where do these folks think there is "not" a market for ZX12 drag parts??
Fack... you can buy a used ZX12 for $4500 nowadays... the perfect price for modifying!
Just a pain the the Arse to work on
____________
Builder and tuner of some of the fastest N.A. and P/A Hayabusas and ZX12 /14 in Texas
|
TurboBlew
Moderator
BUSY DOING THE SCHIAVO
Posts: 4590
|
posted January 20, 2005 04:17 PM
Sure.... but the motor is so easy to remove...lol
____________
Official Charter Member of the RIDERS OF KAWASAKI MEMBERSHIP REVOCATION CLUB
Also a BadAss Internet Forum Moderator 4 Hire!! Come at me brah!
|
entropy
Moderator
Posts: 8671
|
posted January 20, 2005 04:40 PM
quote:
Sure.... but the motor is so easy to remove...lol
It is now; JohnnyCheese got tired of all those nuts n' bolts and put a zipper on mine
____________
This moderator uses moderation in moderation
|
|
|
HOME
NEW TOPIC