Kaw Man
Expert Class
Posts: 186
|
posted February 13, 2003 02:56 PM
custom map for 02' ZX12
Do any one no a good Dyno Shop in or close to Mississippi.
I need a custom map make for the ZX12.I want to take it
to Gaineville and to Bike Week.
   
|
kawachan
Pro
Posts: 1031
|
posted February 13, 2003 03:08 PM
Have you tried the DynoHet website?? You can type in your state and search for dealers in the area. Call all of them and use the most qualified one. Map should be around the 200 range, depending on what PC you have. PC IIIR's are easier to map on a DJ 250, while the EMS and PC III have to be done manually.
____________
RED NINJAS RULE!!
|
kcadby
Pro
Posts: 1733
|
posted February 13, 2003 04:32 PM
 Edited By: kcadby on 13 Feb 2003 16:38
We are in Jacksonville!!!
Stock Mild To Wild
2012 Blanding Blvd
Jacksonville Fl.
We ARE listed on the DynoJet WebSite...
$200 for a Custom TunningLink map with a PC3-PC3R...
Call and make an appointment (904) 389-1177...I will make SURE that you are mapped for your ride here in Fl 
UMMMmmm...did I mention that...ZX12s are my favorite bikes to work on (and RACE  )...
NOT easy to map (2-3K rpms) but it's worth it when it's done...
|
Hells Dark Lord
Needs a life
living life, and loving it.
Posts: 7981
|
posted February 13, 2003 11:58 PM
hey kcadby...I still intend on bringing the 12 to you when I get home out of this sand box...if it gets too looking like I am going to be here for a long while, I will ahve Kelly get with you and load it up and bring it down...Jax is about 2.5 hours south of me, so it will turn out to be an all day thing for her if it comes to that.......will get with you again when i know more...Jim
____________
When in doubt, lean farther and go faster....
|
wannabe
Pro
Posts: 1931
|
posted February 14, 2003 12:03 AM
Dang, $200. I wish I lived near you. My local shop charges $400 for a custom map. Freakin' Silicon Valley!!! 
|
Kaw Man
Expert Class
Posts: 186
|
posted February 14, 2003 07:52 PM
custom map
Kcadby
How long do it take to make a good map. I will
call you Saturday morning.
|
kcadby
Pro
Posts: 1733
|
posted February 15, 2003 10:32 AM
KawMan...
It takes me at least 2 hours to do ZX12s...longer if I feel that the Throttle Bodies need to be sync-ed...
We are SLAMMED busy right now with people getting ready for Bike Week but...Call for an appointment and I'll do whatever it takes to get you mapped I LOVE ZX12s
I was in my yard last night at 11PM prepping a gas tank to be KREEMed on a bike we sold
HDL...
JEEEZ-us...PLEASE keep your head down over there!!!
It's bad enough hearing about people getting hurt on they're bikes on these WebSites...
I can't imagine hearing/reading about any of you guys from this board? getting hurt over there???
I have GIANT respect for you/our people over there!!! (as I sit SAFE and Sound eating my BigMac...trying {with success} to become a member of TFA)...
Your bike will be in GOOD HANDS here for sure...
I look forward to YOU bringing it here
|
ZX6Rgirl
Novice Class
Posts: 38
|
posted February 15, 2003 04:01 PM
kcadby...I hope HDL and I can BOTH make the trip to see you. I should have most, it not all of his honey do's done before before he gets home and I have to go visit the sandbox myself. That is ok though, we are already preparing the hand off. I hope to see him before I leave, our tours may overlap one another though. Either way appreciate you taking care of the 12.
|
Hells Dark Lord
Needs a life
living life, and loving it.
Posts: 7981
|
posted February 16, 2003 12:28 AM
In case anyone didnt know or was wondering I finally got Kelly on the board, she is chatting as ZX6Rgirl.....she may have to come here in June, hopefully I will be home before she leaves. If not it looks like a 14 or 15 month seperation for us, and that I dont look forword to, at all....
Thanks for the kind words kcadby, either way one of us will be there sooner or later with it, adn I kow it wil be in good hands, or I wouldnt bring it to ya, I am very particular about who does anything to it, and I have heard nothig but good stuff about you....that is why you will get it when its time...later and thanks all...Jim,
____________
When in doubt, lean farther and go faster....
|
vozizm
Needs a job
Got Nothing Witty To Say
Posts: 4417
|
posted February 16, 2003 11:18 AM
kcadby ..
Should i do the Pilot Jet Mod before the map?...or would it make a difference ?.....
BTY... i might.... i repeat might get transfered to Jacksonville this summer...
____________
VOZ
|
kcadby
Pro
Posts: 1733
|
posted February 18, 2003 12:25 PM
Welcome to the board ZX6Rgirl!!!
Hope to see you BOTH sooon...
I haven't experimented with that (pilot jet mod) so...I can't give accurate opinion...
The ONE ZX12 that I mapped that already had that mod has a pretty bad on-off throttle lurch above 5K so it didn't work for him...
It would be best to have the bike "as you would ride it" before I map it
|
|
|
HOME
NEW TOPIC