Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted June 25, 2002 07:52 AM
Muzzy EMS Pics of the harness and EMS install:
(Note: These are my personal labels on the harness. They are real big, to clearly label each wire and make it easy to get clear photos. I would imagine that the production harness will have smaller labels on the wiring.
Harness routing:
Water temp sensor:
The EMS uses the stock Atmos press sensor:
Stock wiring to EMS wiring. I can't stress this enough: You must have the Factory Service Manual wiring diagrams in front of you. Muzzy supplies wiring diagrams for their harness to the EMS, but you must match that to the corresponding wiring on the stock harness and sensors.
posted June 25, 2002 11:03 AM
Hey SWFT! Do you have any maps for this bad boy (is that a stupid question)? I'd like to get one, but I have no way to "map" it on my bike .
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted June 25, 2002 02:59 PM
The only map for it is supplied by Muzzys. The EMS has a serial port, and Muzzys supplies the comm cable with the unit. Hope that answers your question!
posted June 25, 2002 04:44 PM
Great shots If you need a place to host those pics or even a how-to-install Muzzys EMS webpage, let me know I would be glad to keep track of your progess hosting on http://www.dontbescaredracing.com
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted June 25, 2002 04:47 PM
Thanks for the offer! I'm working with Muzzys on a daily basis, and trying to document the process as thoroughly as possible. One thing for sure, you gotta have the factory manual!
posted July 01, 2002 08:04 PM
nice finger prints on that there Ti pipe!
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.
posted July 01, 2002 09:37 PM
Oh yeah thats right this is the heavy bike!!
____________
To those who do not count their life in years, but in how life
has touched them in the past and how much it can hold in the
future; -- Youth is forever.
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted July 02, 2002 06:39 AM
Heavy bikes for heavy riders. And hoping that Milo will have a line on the right spark plug wires, etc. Want to hear this bitch sing!
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted July 02, 2002 01:50 PM
Still waiting on plug wires, but at least I've got a good candidate for the boot. Has to be very long to take the place of the stick coil. Got that worked out, will prolly have results tomorrow!
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted July 08, 2002 05:56 PM
Gotta give a big vote of thanks to Rob Muzzy and Doug Meyer, for their help in setting up the EMS on my 12. Rob spent quite a bit of time taking me through the different settings, and helping me diagnose a problem I was having. I'll have to pick it back up after Laguna, but I hope to hear it run then!
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted July 16, 2002 01:23 PM
It's alive! Got back from Laguna, and first chance I had, I made it over to the shop and put the battery in the bike. Fired it right up, let it idle enough to get the fan spinning. Idled smooth as butter down at 1k rpm, pulled up cleanly from there when I blipped the throttle. Dyno runs maybe later this week, and of course, more tuning.
Needs a life
Full throttle!
Posts: One MEEEEEELLION
posted July 16, 2002 02:44 PM
Thanks! I'll be busy with work for the next few days, but I hope to have some more screen captures for y'all by next week.
____________
82 Gpz750, 84 Ninja 900, 2000 ZX12R (Muzzy Big Bore Kit), *another* 2000 ZX12R (Muzzy custom stroke crank 1341cc motor), 2004 ZZR1200, 2005 ZX10R, 2007 ZX14, 2008 Concours 14, 2014 Versys 650, 2014 Yamaha WR450F, 2015 Ninja H2
HOME
NEW TOPIC
posted June 25, 2002 07:52 AM
.
posted July 16, 2002 01:30 PM
