RICH CRAFT 1
Zone Head
Posts: 681
|
posted October 30, 2012 02:24 PM
On November 17 at Dallas Raceway, Mayo will be there. I'm pretty sure he can run 4.90s and I hadn't heard of any of the Houston boys wanted to take his money?
Ken
____________
Red 06 ZX14 RR
  
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 02:34 PM
 Edited By: 1badzx12r on 30 Oct 2012 22:37
quote:
On November 17 at Dallas Raceway, Mayo will be there. I'm pretty sure he can run 4.90s and I hadn't heard of any of the Houston boys wanted to take his money?
Ken
why wasn't he in the GROTY race then.. on nov the 10th he can get some too so he don't have to wait til nov 17th .
i can assure you these guys ain't scared of no 4.90 bike http://www.psychobike.com/forums/gulf-coast-racing/111624-roll-call-nov10th-crandall-tx.html
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted October 30, 2012 02:42 PM
quote:
quote:
On November 17 at Dallas Raceway, Mayo will be there. I'm pretty sure he can run 4.90s and I hadn't heard of any of the Houston boys wanted to take his money?
Ken
why wasn't he in the GROTY race on nov the 10th he can get some too so he don't have to wait til nov 17th .
because his race with no Mercy Percy has been scheduled for months, the other race was thrown together in about a month's time. I don't think he's gonna make a trip to Texas without a race.
But you're ducking the question if 14s are so slow, why don't some of them boys from Houston , come and take his money ?
Ken
____________
Red 06 ZX14 RR
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 02:44 PM
Edited By: 1badzx12r on 30 Oct 2012 22:49
quote:
quote:
quote:
On November 17 at Dallas Raceway, Mayo will be there. I'm pretty sure he can run 4.90s and I hadn't heard of any of the Houston boys wanted to take his money?
Ken
why wasn't he in the GROTY race on nov the 10th he can get some too so he don't have to wait til nov 17th .
because his race with no Mercy Percy has been scheduled for months, the other race was thrown together in about a month's time. I don't think he's gonna make a trip to Texas without a race.
But you're ducking the question if 14s are so slow, why don't some of them boys from Houston , come and take his money ?
Ken
why don't he show -up when they are in town .. they are advertizing anybody can join and come take $8,000.00
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
mathews
Expert Class
Posts: 425
|
posted October 30, 2012 02:45 PM
I was under the impression that the Dallas Raceway race was 1/4 mile.Nobody around here grudge races 1/4 mile.But trust me,I dont have a dog in this fight,there a quite a few bikes around here that are sub 4.90 bikes
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 03:02 PM
Edited By: 1badzx12r on 30 Oct 2012 23:04
http://www.youtube.com/watch?v=idP4yc0q6q4
has a zx14 ever won prostreet championship
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted October 30, 2012 03:46 PM
quote:
I was under the impression that the Dallas Raceway race was 1/4 mile.Nobody around here grudge races 1/4 mile.But trust me,I dont have a dog in this fight,there a quite a few bikes around here that are sub 4.90 bikes
Real grudge bikes run quarter-mile. I think it's just a Houston thing.
____________
Red 06 ZX14 RR
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted October 30, 2012 03:56 PM
quote:
http://www.youtube.com/watch?v=idP4yc0q6q4
has a zx14 ever won prostreet championship
what does that have to do with a ZX 14 site and the fastest production Street bike in the world ?
The only factory support in that series is real street, and I think RG has a pretty good handle on that.
When it comes to drag racing, You have to follow the money.
Ken
____________
Red 06 ZX14 RR
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 04:14 PM
Edited By: 1badzx12r on 31 Oct 2012 00:18
quote:
quote:
http://www.youtube.com/watch?v=idP4yc0q6q4
has a zx14 ever won prostreet championship
what does that have to do with a ZX 14 site and the fastest production Street bike in the world ?
The only factory support in that series is real street, and I think RG has a pretty good handle on that.
When it comes to drag racing, You have to follow the money.
Ken
it has everything to do with a bike .. nobody races production streetbikes .. show me where a production streebike that ran a 4.90 .. you was quick to find a 4.90 zx14 and now it don't matter .. you are a joke .. .. its how far you can build your race bike and how fast it can go ... and the zx14 has to many limits or cost to much to be a success in the racing world.. i can find 5 ported heads on ebay for a busa from 300.00 to 1200.00 with web cams.. what can you find for a zx14 ...
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=hayabusa+head&_sacat=0&_from=R40
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted October 30, 2012 04:25 PM
quote:
quote:
quote:
http://www.youtube.com/watch?v=idP4yc0q6q4
has a zx14 ever won prostreet championship
what does that have to do with a ZX 14 site and the fastest production Street bike in the world ?
The only factory support in that series is real street, and I think RG has a pretty good handle on that.
When it comes to drag racing, You have to follow the money.
Ken
it has everything to do with a bike .. nobody races production streetbikes .. show me where a production streebike that ran a 4.90 .. you was quick to find a 4.90 zx14 and now it don't matter .. you are a joke .. .. its how far you can build your race bike and how fast it can go ... and the zx14 has to many limits or cost to much to be a success in the racing world.. i can find 5 ported heads on ebay for a busa from 300.00 to 1200.00 with web cams.. what can you find for a zx14 ...
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=hayabusa+head&_sacat=0&_from=R40
Almost everybody here is into fast Street bikes, maybe you should go and tell them over on the Busa site ?
Oh I forgot! There's nobody over there LOL
Ken
____________
Red 06 ZX14 RR
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 04:30 PM
Edited By: 1badzx12r on 31 Oct 2012 00:33
quote:
quote:
quote:
quote:
http://www.youtube.com/watch?v=idP4yc0q6q4
has a zx14 ever won prostreet championship
what does that have to do with a ZX 14 site and the fastest production Street bike in the world ?
The only factory support in that series is real street, and I think RG has a pretty good handle on that.
When it comes to drag racing, You have to follow the money.
Ken
it has everything to do with a bike .. nobody races production streetbikes .. show me where a production streebike that ran a 4.90 .. you was quick to find a 4.90 zx14 and now it don't matter .. you are a joke .. .. its how far you can build your race bike and how fast it can go ... and the zx14 has to many limits or cost to much to be a success in the racing world.. i can find 5 ported heads on ebay for a busa from 300.00 to 1200.00 with web cams.. what can you find for a zx14 ...
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=hayabusa+head&_sacat=0&_from=R40
Almost everybody here is into fast Street bikes, maybe you should go and tell them over on the Busa site ?
Oh I forgot! There's nobody over there LOL
Ken
jealous eh can find shit http://www.hayabusazone.com/pbe.html heres another 1 .. how much it cost you to do this to your bike ... 
oops my bad you can't you have to send your block off for 2 months and 1200.00 dollars later it shows up ..then you can order pistons for 800.00. and then a head gasket 100.00
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
mathews
Expert Class
Posts: 425
|
posted October 30, 2012 04:55 PM
Actually there is very little quarter mile grudge racing anywhere else.I have been to almost every racetrack in the nation.All the southeast and east tracks run 1/8 mile
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted October 30, 2012 05:10 PM
Edited By: RICH CRAFT 1 on 31 Oct 2012 01:12
quote:
quote:
quote:
quote:
quote:
http://www.youtube.com/watch?v=idP4yc0q6q4
has a zx14 ever won prostreet championship
what does that have to do with a ZX 14 site and the fastest production Street bike in the world ?
The only factory support in that series is real street, and I think RG has a pretty good handle on that.
When it comes to drag racing, You have to follow the money.
Ken
it has everything to do with a bike .. nobody races production streetbikes .. show me where a production streebike that ran a 4.90 .. you was quick to find a 4.90 zx14 and now it don't matter .. you are a joke .. .. its how far you can build your race bike and how fast it can go ... and the zx14 has to many limits or cost to much to be a success in the racing world.. i can find 5 ported heads on ebay for a busa from 300.00 to 1200.00 with web cams.. what can you find for a zx14 ...
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=hayabusa+head&_sacat=0&_from=R40
Almost everybody here is into fast Street bikes, maybe you should go and tell them over on the Busa site ?
Oh I forgot! There's nobody over there LOL
Ken
jealous eh can find shit http://www.hayabusazone.com/pbe.html heres another 1 .. how much it cost you to do this to your bike ...
oops my bad you can't you have to send your block off for 2 months and 1200.00 dollars later it shows up ..then you can order pistons for 800.00. and then a head gasket 100.00
Talking about a joke, your know nothing about building racing engines, it cost $2400 to build a 1530cc Kawi try that with a Busa those parts you showed me won't get you there , with a 14 you don't need rods. They have good rods, but I notice they're the same price, just try to put 100 shot on that Gen 2 board 2 mm over cylinder block, and see what happens it will split down the middle, you can run the old block but then you don't get the air relief holes at the bottom of the skirt like you do with a 14, just another one of those bad designs y'all say we have LOL. short track, had to buy a billet block to build his 1475,Busa and it was $3000 just for the cylinder set, not to speak of the rods he had to buy for another thousand. when you get into the good stuff. It's never cheap, dollar for dollar and weight for weight y'all ain't got nothing in Houston that will run with my red bike.
Ken
____________
Red 06 ZX14 RR
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 05:14 PM
Edited By: 1badzx12r on 31 Oct 2012 01:20
quote:
, dollar for dollar and weight for weight y'all ain't got nothing in Houston that will run with my red bike,
Ken
nope nobody never will match your bike cause you in a class all by yourself RETARD CLASS... ..:LMAO
I DON'T have to build or know anything about motors cause the zx14 never winning a prostreet championship says ALOT HUGE ..SO you don't know shit about motors..
WHAT ABOUT any zx14 running over 250mph in LSR's event says the zx14 motor can't do it.. COME AGAIN how the busa motor is junk to a zx14 motor ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted October 30, 2012 05:18 PM
quote:
quote:
, dollar for dollar and weight for weight y'all ain't got nothing in Houston that will run with my red bike,
Ken
nope nobody never will match your bike cause you in a class all by yourself RETARD CLASS... ..:LMAO
talking about retarded! . That's the best answer you have for a challenge!
Ken
____________
Red 06 ZX14 RR
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 05:24 PM
quote:
quote:
quote:
, dollar for dollar and weight for weight y'all ain't got nothing in Houston that will run with my red bike,
Ken
nope nobody never will match your bike cause you in a class all by yourself RETARD CLASS... ..:LMAO
talking about retarded! . That's the best answer you have for a challenge!
Ken
Challenge I CAN'T MAKE YOUR CLASS RETARD !!!!!!! your all alone on the top with your production streetbike and with your certain tail light and weight restrictions class ...
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
smokinZX14
Needs a life
Posts: 10197
|
posted October 30, 2012 05:26 PM
Gen 2 Busa motor .. great motor for .... well not much ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 05:42 PM
only 154,000 results for blown up zx14 motors https://www.google.com/#hl=en&sugexp=les%3Bcpsugrer&gs_nf=3&tok=ykPw3BjrCmTRfDKpei6fgw&cp=18&gs_id=20&xhr=t&q=zx14+motor+blow+up&pf=p&sclient=psy-ab&oq=zx14+motor+blow+up&gs_l=&pbx=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.&fp=f9820449583d8bf2&bpcl=36601534&biw=1280&bih=552
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 05:46 PM
Edited By: 1badzx12r on 31 Oct 2012 01:50
this looks like rickey 2 races back http://www.youtube.com/watch?v=ujg8dcSdZh8
http://www.youtube.com/watch?v=d63DVXt6GC0
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
smokinZX14
Needs a life
Posts: 10197
|
posted October 30, 2012 05:48 PM
quote:
quote:
quote:
quote:
quote:
http://www.youtube.com/watch?v=idP4yc0q6q4
has a zx14 ever won prostreet championship
what does that have to do with a ZX 14 site and the fastest production Street bike in the world ?
The only factory support in that series is real street, and I think RG has a pretty good handle on that.
When it comes to drag racing, You have to follow the money.
Ken
it has everything to do with a bike .. nobody races production streetbikes .. show me where a production streebike that ran a 4.90 .. you was quick to find a 4.90 zx14 and now it don't matter .. you are a joke .. .. its how far you can build your race bike and how fast it can go ... and the zx14 has to many limits or cost to much to be a success in the racing world.. i can find 5 ported heads on ebay for a busa from 300.00 to 1200.00 with web cams.. what can you find for a zx14 ...
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=hayabusa+head&_sacat=0&_from=R40
Almost everybody here is into fast Street bikes, maybe you should go and tell them over on the Busa site ?
Oh I forgot! There's nobody over there LOL
Ken
jealous eh can find shit http://www.hayabusazone.com/pbe.html heres another 1 .. how much it cost you to do this to your bike ...
oops my bad you can't you have to send your block off for 2 months and 1200.00 dollars later it shows up ..then you can order pistons for 800.00. and then a head gasket 100.00
zx14 bore and replate list price 524.00 ( 86 MM ) My cost is way cheaper .. Pistons 633 ( 86 MM ) , again my price is much less .. Head gasket 54.00 bucks and my cost is less ... You just pick this fucked up numbers out of your head or what ? Just did a busa and had to wait forever to get the block because they didn't have any in stock , so we had to send our old block and have it done ... Sent off a zx14 block for a 1417 and it came back in 2 weeks ..
Kills me that you are bitching about the one piece ZX14 block when all the 1000 bikes use the same damn thing and you don't hear them bitching ..
1bad better save all the Gen 1 busa blocks you can because the gen 2 guys are buying them like hot cakes .. Either that or pay BIG bucks for a aftermarket block ..
Speed cost no matter what name is on the tank ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinZX14
Needs a life
Posts: 10197
|
posted October 30, 2012 05:52 PM
162,000 results for blown up Busa motors ... Looks like the busa wins ... lol ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
smokinZX14
Needs a life
Posts: 10197
|
posted October 30, 2012 05:53 PM
Blown 2 gear problem Busa .. 3,900,000 results
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
1badzx12r
Needs a life
Posts: 8321
|
posted October 30, 2012 05:55 PM
quote:
zx14 bore and replate list price 524.00 ( 86 MM ) My cost is way cheaper .. Pistons 633 ( 86 MM ) , again my price is much less .. Head gasket 54.00 bucks and my cost is less ... You just pick this fucked up numbers out of your head or what ? Just did a busa and had to wait forever to get the block because they didn't have any in stock , so we had to send our old block and have it done ... Sent off a zx14 block for a 1417 and it came back in 2 weeks ..
Kills me that you are bitching about the one piece ZX14 block when all the 1000 bikes use the same damn thing and you don't hear them bitching ..
1bad better save all the Gen 1 busa blocks you can because the gen 2 guys are buying them like hot cakes .. Either that or pay BIG bucks for a aftermarket block ..
Speed cost no matter what name is on the tank ..
then you should have every fukken motor replated job in the country.. along with head gaskets and whatever in the else you want to sell .. I'M GONNA HOLD YOU TO THEM PRICES
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
mathews
Expert Class
Posts: 425
|
posted October 30, 2012 05:56 PM
Ken,if you really believe Houston has nothing for your bike LMK.I am pretty sure I know where a GSXR that will go at that red 14 for any amount of money .No BS ,no excuses,heads up first one to the finish.A simple yes or I was wrong will suffice!
|
smokinZX14
Needs a life
Posts: 10197
|
posted October 30, 2012 05:58 PM
quote:
quote:
zx14 bore and replate list price 524.00 ( 86 MM ) My cost is way cheaper .. Pistons 633 ( 86 MM ) , again my price is much less .. Head gasket 54.00 bucks and my cost is less ... You just pick this fucked up numbers out of your head or what ? Just did a busa and had to wait forever to get the block because they didn't have any in stock , so we had to send our old block and have it done ... Sent off a zx14 block for a 1417 and it came back in 2 weeks ..
Kills me that you are bitching about the one piece ZX14 block when all the 1000 bikes use the same damn thing and you don't hear them bitching ..
1bad better save all the Gen 1 busa blocks you can because the gen 2 guys are buying them like hot cakes .. Either that or pay BIG bucks for a aftermarket block ..
Speed cost no matter what name is on the tank ..
then you should have every fukken motor replated job in the country.. along with head gaskets and whatever in the else you want to sell .. I'M GONNA HOLD YOU TO THEM PRICES
Ok hold me to the list prices .. Those prices are right of APEs website .. you pay list and i'll make cash baby !!!! I'll even toss in free shipping .. But if you stop being a jackass i'll cut you a deal below list price .. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
|
|
HOME
NEW TOPIC