BlackMagic14
Needs a job
Posts: 2058
|
posted June 02, 2013 07:40 PM
Quick question for all that know. Are the stage one and two wires off the NOS mini (big red wire) (big blue wire) hot wires or ground wires? I hooked up my NOS mini and I ran the big blue wire to one side of the solenoid and grounded the other side but when I am testing and go WOT I'm not hearing the solenoid click. I'm thinking I may need to put the other side of the solenoid to a hot wire? I tested the big blue wire and its not "hot" so I thought I had something messed up but now I'm thinking its sending a ground signal? Help. Also to use the NOS mini to switch
Maps on my PCV which white would I use and where would I hook it up to the PCV?
Thanks
  
|
MotoCycho
Expert Class
Posts: 337
|
posted June 03, 2013 12:19 AM
 Edited By: MotoCycho on 3 Jun 2013 08:22
They supply ground.
In order to use the Mini to switch maps on the PCV you will have to use a relay to close as a switch. The output signal wires also supply grounds.
Enjoy!
|
BlackMagic14
Needs a job
Posts: 2058
|
posted June 03, 2013 04:35 AM
Thanks!
|
mma-tv
Expert Class
Posts: 147
|
posted June 03, 2013 09:33 PM
Digital Delay makes one for bikes.
http://www.racedigitaldelay.com/rpmswitches.html
|
|
|
HOME
NEW TOPIC