colt
Expert Class
if u aint first your last
Posts: 163
|
posted August 18, 2012 07:36 PM
08 zx14 needs clutch were from
Need full clutch kit I'm a broke white boy
  
|
colt
Expert Class
if u aint first your last
Posts: 163
|
posted August 18, 2012 08:17 PM
Need a good cheap clutch if anyone k.led were I can order one what's a desent price on a clutch job
|
BrucerZX14
Expert Class
Posts: 373
|
posted August 19, 2012 05:56 AM
I use the stock plates. Haven't had a reason to change. You can change the clutch yourself. Very simple job.
|
codyc_13
Expert Class
Posts: 342
|
posted August 19, 2012 06:33 AM
Cycle concepts, and do it yourself.
____________
06 zx14, 65", lowered, muzzy pipe, pcIII, air shifter, Litz revalve, Adams cut seat, OSR cut pan 87 pump gas.
8.97 at 149mph
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted August 19, 2012 06:39 AM
I also use OEM steels and fibers https://www.carolinacycle.net/en/
wee
|
colt
Expert Class
if u aint first your last
Posts: 163
|
posted August 19, 2012 08:39 AM
A shop told Me 340 and they would change oil and filter too is that too high
|
BrucerZX14
Expert Class
Posts: 373
|
posted August 19, 2012 09:35 AM
For a job you can do yourself in about an hour...yea! The clutch on a ZX14 is a piece of cake to replace. Why pay someone to do it? Besides...you'll get to know your bike a lot better.
|
Seno
Pro
BANNED FOR LIFE!
Posts: 1230
|
posted August 19, 2012 09:55 AM
+1, Cycle concepts clutch worked well for me (It is a repackaged K&G clutch)
____________
2012 Black 14R -> Completely done!
|
codyc_13
Expert Class
Posts: 342
|
posted August 19, 2012 10:13 AM
You can do it yourself for $150. Doing a clutch is not hard at all.
____________
06 zx14, 65", lowered, muzzy pipe, pcIII, air shifter, Litz revalve, Adams cut seat, OSR cut pan 87 pump gas.
8.97 at 149mph
|
colt
Expert Class
if u aint first your last
Posts: 163
|
posted August 19, 2012 11:27 AM
I work on cars just never tore into a bike before can some one give me a step by step
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted August 19, 2012 08:12 PM
quote:
I work on cars just never tore into a bike before can some one give me a step by step
get the clutch, fibers and steels, and a clutch cover gasket just in case you need it, oil change to, filter and oil, post up when your ready to do it, we will work you through it, it's easy!
wee
|
dakota9498
Pro
Posts: 1181
|
posted August 20, 2012 05:59 AM
quote:
quote:
I work on cars just never tore into a bike before can some one give me a step by step
get the clutch, fibers and steels, and a clutch cover gasket just in case you need it, oil change to, filter and oil, post up when your ready to do it, we will work you through it, it's easy!
wee
+1 Wee, it is a pretty simple job. All you need is the manual (available on this site via the sticky at the top of the page), small mechanical inclination, and common sense to ask a question if you are unsure. People on this site are always happy to help someone out. 
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
colt
Expert Class
if u aint first your last
Posts: 163
|
posted August 20, 2012 10:35 AM
Hell yea sounds good I been wanting to do it myself seen videos and guys doing up real fast at the track I'm just worried cause its a hydraulic clutch
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted August 20, 2012 11:29 AM
quote:
Hell yea sounds good I been wanting to do it myself seen videos and guys doing up real fast at the track I'm just worried cause its a hydraulic clutch
get the stuff and call us.
wee
|
kawpower
Zone Head
Mr kawasaki 2 you!
Posts: 887
|
posted August 20, 2012 11:36 AM
Seno would u make a bet that cycle concepts drag pak is kg ? i think u confuse his with shnitz. everytime someone says Cycle concepts you say the same thing, and they are not repaked KG.
____________
Cecil County 2010 Motorcycle ET Champ. 9 Wins- 4 RUs .06zx14 turboed for 2012 .
|
colt
Expert Class
if u aint first your last
Posts: 163
|
posted August 20, 2012 09:34 PM
Codyc were u get you clutch kit cause cheapest I can find is 200 plus oil and filter be 250 all said and done might as well let shop do it plus got a buddy on a 06 zx14 all the way drag he said I should just put heaver springs Idk ever one is saying 150 for a clutch kit sounds good I can't find it
|
Rich
Expert Class
Just havin' fun!!
Posts: 300
|
posted August 21, 2012 12:41 AM
Call Dewayne at Cycle Concepts. This is where we get the Drag Pack.
The ones I got from him did not say KG on them.
//s12882.50belowcommerce.com/index.htm
____________
07 Green and Black, How fast is fast?
203 for now. Limited $$ = limited HP.
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted August 21, 2012 03:02 AM
quote:
Codyc were u get you clutch kit cause cheapest I can find is 200 plus oil and filter be 250 all said and done might as well let shop do it plus got a buddy on a 06 zx14 all the way drag he said I should just put heaver springs Idk ever one is saying 150 for a clutch kit sounds good I can't find it
You don't need heavy springs, I would like to know where you can get a clutch for $150 tyd? If you can get a oem clutch local for $200 tax included get it.
wee
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted August 23, 2012 01:25 PM
quote:
I work on cars just never tore into a bike before can some one give me a step by step
you order the parts?
wee
|
colt
Expert Class
if u aint first your last
Posts: 163
|
posted August 23, 2012 03:44 PM
Fuck no I'm a poor ass white boy I ain't working right now waiting on my wife to get paid
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted August 23, 2012 03:48 PM
quote:
Fuck no I'm a poor ass white boy I ain't working right now waiting on my wife to get paid
No problem, back to the top when you get it.
wee
|
colt
Expert Class
if u aint first your last
Posts: 163
|
posted August 23, 2012 06:16 PM
Thanks wee you da man
|
1badzx12r
Needs a life
Posts: 8321
|
posted August 23, 2012 06:19 PM
 Edited By: 1badzx12r on 24 Aug 2012 02:23
quote:
Fuck no I'm a poor ass white boy I ain't working right now waiting on my wife to get paid
http://www.ebay.com/itm/Outlaw-Racing-Kevlar-Complete-Clutch-Kit-Steel-GSX-1300-RX-Hayabusa-1999-/180944304539?pt=Motorcycles_Parts_Accessories&hash=item2a211ef99b&vxp=mtr
i got a clutch pack
what the wife look like
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
codyc_13
Expert Class
Posts: 342
|
posted August 23, 2012 06:25 PM
I buy from Dwayne at Concept Cycles, I think its around 155 shipped.
____________
06 zx14, 65", lowered, muzzy pipe, pcIII, air shifter, Litz revalve, Adams cut seat, OSR cut pan 87 pump gas.
8.97 at 149mph
|
smokinZX14
Needs a life
Posts: 10197
|
posted August 23, 2012 06:33 PM
Concept Cycles clutches have been working great for me .. One thing i have seen with Dwaynes clutches is my oil stays clean .. With OEM clutches my oil got dark color to it real quick .. I'm guessing clutch dust .. With the Concept Cycles clutches even after a bunch of passes my oil is still very clear .. I think they are a great deal at 155 bucks myself ....
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
|
|
HOME
NEW TOPIC