smokinZX14
Needs a life
Posts: 10197
|
posted May 31, 2012 04:19 PM
The drag pack came UPS today ... Got it installed and it is clearly taller than the OEM clutches .. The fingers on the outter basket almost line up with the clutch pressure plate like the gen 1 zx14 did .. It will be nice just to pull the oil cap and look at how much wear i have just like i did in the past with my Gen 1s .. Seeing that the stack was a bit taller i lowered my size of my clutch springs shims just a bit ... Clutch feels good but i didn't have a masker link to finsh my chain so i didn't get to test ride it yet ..
Since i installed a taller tire my gearing was off a bit so i changed to a 44 tooth from the 43 i was using with the shorter tire .. I also had to add a extra link to the chain to get my wheel back to were it was before the gear change .. I had to order two master links and UPS is a little slow getting them to me .. I should have them Friday so i may be able to test Sat night at my local 1/8 mile track .. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
  
|
HOME
NEW TOPIC