Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 21, 2012 10:31 PM
1/4 Mile wee
Got to do some 1/4 mile action tonight, I didn't get to do lots of tuning with Richcraft because of the series race, I think they only let me run 5 times and the wait was long in between runs, the 5th run I was so tired it was pathetic, loaded up after that one. Best I could manage was an 8.80@153.8mph, scales were not installed so I didn't get to weigh bike and rider, All 5 passes were 8.80's. Hi Lucky! lol
wee
  
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted April 21, 2012 11:12 PM
How did you do in the 1/8?
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 22, 2012 05:20 AM
quote:
How did you do in the 1/8?
5.63@125.8mph
wee
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 22, 2012 06:47 AM
8.80@153.8 I don't see a problem with those numbers ..Guessing Your bike is 540+ ? pounds and you are 200+ pounds ? total of 740+ pounds and running 8.80 flat ...Seeing the gen 1 modded zx14 with a 200 pound rider is hard pressed to run 8 anything ( most run 9.10s to 9.20s on a good pass )You are going great in my book .. Looks like your 1/8 mile MPH came up with the mapping also ..
What was your 60 footer on that 8.80 pass ?
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
1badzx12r
Needs a life
Posts: 8321
|
posted April 22, 2012 06:58 AM
quote:
Seeing the gen 1 modded zx14 with a 200 pound rider is hard pressed to run 8 anything ( most run 9.10s to 9.20s on a good pass )?
so all those guys in the old gen 1 zx14 eight second club that you started where fly weights... wheelie weren't you a member
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 22, 2012 06:59 AM
quote:
8.80@153.8 I don't see a problem with those numbers ..Guessing Your bike is 540+ ? pounds and you are 200+ pounds ? total of 740+ pounds and running 8.80 flat ...Seeing the gen 1 modded zx14 with a 200 pound rider is hard pressed to run 8 anything ( most run 9.10s to 9.20s on a good pass )You are going great in my book .. Looks like your 1/8 mile MPH came up with the mapping also ..
What was your 60 footer on that 8.80 pass ?
it was a high 1.30, time slips are in the truck,
wee
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 22, 2012 07:05 AM
quote:
quote:
Seeing the gen 1 modded zx14 with a 200 pound rider is hard pressed to run 8 anything ( most run 9.10s to 9.20s on a good pass )?
so all those guys in the old gen 1 zx14 eight second club that you started where fly weights... wheelie weren't you a member
Sure wee got onto the 8s after 2 zx14s and 1000s of passes .. shane got into the 8s with a lot of weight removed off his bike . Wee has at least 70 + pounds more than me to take down the track ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 22, 2012 07:05 AM
quote:
quote:
Seeing the gen 1 modded zx14 with a 200 pound rider is hard pressed to run 8 anything ( most run 9.10s to 9.20s on a good pass )?
so all those guys in the old gen 1 zx14 eight second club that you started where fly weights... wheelie weren't you a member
yes 8.95, but that was the best pass at DRW, I went there every weekend, I made 4-5 runs yesterday, my 14r will run 8.70's there, I just need to go when I can get a run that will be less than 1 hour apart, 14r is going to be about 2 tenths faster than my gen 1 in a 1/4 mile.
wee
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 22, 2012 07:07 AM
 Edited By: smokinZX14 on 22 Apr 2012 15:08
quote:
quote:
8.80@153.8 I don't see a problem with those numbers ..Guessing Your bike is 540+ ? pounds and you are 200+ pounds ? total of 740+ pounds and running 8.80 flat ...Seeing the gen 1 modded zx14 with a 200 pound rider is hard pressed to run 8 anything ( most run 9.10s to 9.20s on a good pass )You are going great in my book .. Looks like your 1/8 mile MPH came up with the mapping also ..
What was your 60 footer on that 8.80 pass ?
it was a high 1.30, time slips are in the truck,
wee
High 1.30s .. Well that means there are some mid to low 8.70s to be had .. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 22, 2012 07:08 AM
quote:
quote:
quote:
8.80@153.8 I don't see a problem with those numbers ..Guessing Your bike is 540+ ? pounds and you are 200+ pounds ? total of 740+ pounds and running 8.80 flat ...Seeing the gen 1 modded zx14 with a 200 pound rider is hard pressed to run 8 anything ( most run 9.10s to 9.20s on a good pass )You are going great in my book .. Looks like your 1/8 mile MPH came up with the mapping also ..
What was your 60 footer on that 8.80 pass ?
it was a high 1.30, time slips are in the truck,
wee
High 1.30s .. Well that means there are some midto low 8.70s to be had ..
yep.
wee
|
Lucky14
Pro
Posts: 1439
|
posted April 22, 2012 08:02 AM
The 8.80 was actually an 8.801, so only 2 thousandths away from being able to say it ran an 8.7 ......... 
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
mma-tv
Expert Class
Posts: 147
|
posted April 22, 2012 08:03 AM
This thread is inspriational.
I went to opening day at Cordova yesterday and it was jam packed, plus they were having problems with the timing equipment so I only made 2 passes.
11.0 @ 134 and then a 10.8 @ 136. Maybe next weekend I can get some back to back runs and work on that pathetic 2.0 60'. Also learned traction control is not my friend at the dragstrip.
|
kaw-rick
Pro
Posts: 1167
|
posted April 22, 2012 08:34 AM
wheelie how are you geared now?
|
edszx14
Expert Class
Posts: 271
|
posted April 22, 2012 08:38 AM
Great job wheelie. That's damn fast in my book.
____________
Ed
|
madnessracing
Pro
Vmax and Busa Beater
Posts: 1140
|
posted April 22, 2012 08:43 AM
Good Job Wee! Im thinking maybe the air wasnt there for you but to me it looks good.
____________
Shorty's Performance
Team Madness Racing
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 22, 2012 09:44 AM
quote:
wheelie how are you geared now?
17-51, through the traps at the top of 6th.
wee
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 22, 2012 09:45 AM
Shorty, the air was pretty good,
wee
|
CraZX14
Expert Class
Posts: 399
|
posted April 22, 2012 10:29 AM
Nice piloting, Wee! I'm waiting for Brock's CT Meg and lowering links. Although it is already hitting 90+ degrees in Sacramento, I'll be posting some "average Joe" numbers from the west coast in the near future
____________
2003 L.E. Hayabusa
|
JZX
Zone Head
Posts: 943
|
posted April 22, 2012 11:01 AM
Edited By: JZX on 22 Apr 2012 19:05
Wee
Me
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
01smokes
Needs a job
Posts: 2243
|
posted April 22, 2012 11:46 AM
quote:
Wee
Me
What times were you running yesterday?
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
JZX
Zone Head
Posts: 943
|
posted April 22, 2012 11:56 AM
5.8-5.9 bracket racing-
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 22, 2012 12:20 PM
quote:
5.8-5.9 bracket racing-
You got headwork, right?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 22, 2012 12:22 PM
Edited By: Wheelie on 22 Apr 2012 20:25
quote:
quote:
5.8-5.9 bracket racing-
You got headwork, right?
Intra "JZX" was riding Tricky Ricky's stock motor ZX-14
wee
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 22, 2012 12:34 PM
O I thought he was running 5.9's with motorwork.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
JZX
Zone Head
Posts: 943
|
posted April 22, 2012 01:02 PM
Rickey's bike is a nitrous bike- I was making passes on motor. There is a .38 jet and spray bar but it seems to be no more then a 25 shot with the map he runs. Very consistant bike, but not a head hunter.
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
|
|
HOME
NEW TOPIC