burton
Novice Class
Posts: 80
|
posted April 16, 2012 11:02 AM
muzzy exhaust for 2012 zx14r
i am going to get one of there stainless system for my new zx14r that i just got,would like to find a few things out from anyone that has this system on their 2012 zx14r,did you notice any deference in performance? did you also use a pc-5 or just the exhaust system?,i know a lot of people will say get the brocks system, but i have always had the muzzy s systems just my preference,again if anyone has any information on these new systems i sure would like to here about it.
  
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 16, 2012 11:09 AM
unless Muzzle has a "new" design you will have to shim the radiator out or the pipes hit it, that makes installing the fairing a little harder because the holes do not line up properly. This was on a Muzzle m14/10, which is the only Muzzle I would buy.
wee
|
justoyz2
Zone Head
Justoyz Racing
Posts: 858
|
posted April 16, 2012 08:40 PM
I think the Brock AH2 is the best bang for the buck. It weighs just a pound/half over the CT Single.. you get the tunning maps and future map support with mods that you may complete.
Muzzy you get the exhaust, plus it's heavier
____________
2012 zx14R-blue,2012 zx14R-black, 2014 zx14Trbo, 2011 zx10R, 2007 zx10 Turbo.....
|
redbarron2006
Expert Class
Posts: 104
|
posted April 16, 2012 09:21 PM
They called meike 5 times..
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted April 17, 2012 07:27 AM
$1,145 + Shipping for the AH2 setup versus $798.95 Shipped for the M10
if your shopping on a budget i think the answer is in the price.
JMO
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted April 17, 2012 07:30 AM
Plus $282.95 shipped for the PCV for the 2012.
If you do some shopping around you can find some good deals..
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 17, 2012 09:17 AM
Sounds like the only problem with the muzzle is when you shim the radiator the side fairings are hard to put on.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
reynoldss
Expert Class
Posts: 207
|
posted June 09, 2012 04:14 PM
I just installed a Muzzy full system on my 2012 ZX14R . I put a couple washer in behind the lower radiator support bracket whick gave me plenty of clearence. The side fairings went right on as the come off with no problems. Sounds awesome. I love the look.
____________
Everybodys tyring to go green, I did years ago.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted June 09, 2012 08:52 PM
quote:
$1,145 + Shipping for the AH2 setup versus $798.95 Shipped for the M10
if your shopping on a budget i think the answer is in the price.
JMO
Patrick
Where are you seeing the m-10 shipped for 798? All I see for that price on muzzy's website is there little round can that looks like it belongs on a ninja 250.
|
justoyz2
Zone Head
Justoyz Racing
Posts: 858
|
posted June 09, 2012 11:27 PM
looks sharp, if you got a pc5 and an exhaust for 1100.00 that was a good deal, however the performance you will get from the Muzzy full exhaust is not equal to that of the Brock. Now it you got the M14/M10 that would put apple to apples....
I am sure their street exhaust doesn't compare to the AH2 or Shortmeg 2 exhaust
____________
2012 zx14R-blue,2012 zx14R-black, 2014 zx14Trbo, 2011 zx10R, 2007 zx10 Turbo.....
|
reynoldss
Expert Class
Posts: 207
|
posted June 10, 2012 03:59 AM
 Edited By: reynoldss on 10 Jun 2012 12:01
That is the M14 header with a quieter canister. Just like Brocks the quieter canisters only loose a couple hp on top. I've had 4 Brock system , 3 zx14, and 1 gen II busa. I wanted to try someting else mainly because my dollars are tight. I'm not wanting to star a war here but all the Brocks guys need to realize there are other exhaust. The bike sounds great and runs like a scalded ass dog, raped ape, or whatever other adjective you want to throw at it. Absolutley no flat spots like the zx12r guys reported.
Here is a exhaust shootout Super Street Bike magazine did on the first generation zx14 the Muzzy didn't fair so bad.
____________
Everybodys tyring to go green, I did years ago.
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted June 10, 2012 04:40 AM
Edited By: TH1RT3EN on 10 Jun 2012 12:44
quote:
quote:
$1,145 + Shipping for the AH2 setup versus $798.95 Shipped for the M10
if your shopping on a budget i think the answer is in the price.
JMO
Patrick
Where are you seeing the m-10 shipped for 798? All I see for that price on muzzy's website is there little round can that looks like it belongs on a ninja 250.
Go to 58cycle.com and you will see what i am talking about...
https://store.58cycle.com/product_p/muzzy-full-mega-zx14-12.htm
https://store.58cycle.com/category_s/6366.htm
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted June 10, 2012 04:43 AM
quote:
I just installed a Muzzy full system on my 2012 ZX14R . I put a couple washer in behind the lower radiator support bracket whick gave me plenty of clearence. The side fairings went right on as the come off with no problems. Sounds awesome. I love the look.
Did you have to shim the radiator? I installed my full system and i had no clearance issues what so ever. I didn't have to shim anything, It all lined up and was a perfect fit. I will post up pics when i get the chance..
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
izmuk
Novice Class
09 no flies,pvc,muzzy,low.long
Posts: 49
|
posted June 10, 2012 04:43 AM
my M10/14 is on a gen 1 so im not sure how it translates to a second gen. i can say mine looks and sound great. i love it.you could feel the proformance improve. after i removed the flies i e mailed muzzy and the next day i had the correct map for flies out.
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted June 10, 2012 05:07 AM
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
Eric_The_Jew
Expert Class
Posts: 266
|
posted June 10, 2012 05:16 AM
Reynoldss, in your pic it looks like the mid pipe is a different material than the stainless header. Almost like aluminized metal? Or is it just the lighting in the photo? I'm all about a budget system, but aluminized tubing is where I have to draw the line. 
____________
d4lh.gif" border=0>
|
reynoldss
Expert Class
Posts: 207
|
posted June 10, 2012 05:22 AM
quote:
quote:
I just installed a Muzzy full system on my 2012 ZX14R . I put a couple washer in behind the lower radiator support bracket whick gave me plenty of clearence. The side fairings went right on as the come off with no problems. Sounds awesome. I love the look.
Did you have to shim the radiator? I installed my full system and i had no clearance issues what so ever. I didn't have to shim anything, It all lined up and was a perfect fit. I will post up pics when i get the chance..
Patrick
No I didn't have to Ijust wanted a tad more clearance. Mine bolted up fine as well. I love the look as well. I looked at all available exhaust and the Muzzy just did it for me. Gota admit I was scratchin me butt on the body panels. I have no service manual and didn't want to break anything. Once you figure it out its a pretty smart way of doing it.
____________
Everybodys tyring to go green, I did years ago.
|
reynoldss
Expert Class
Posts: 207
|
posted June 10, 2012 05:25 AM
quote:
Reynoldss, in your pic it looks like the mid pipe is a different material than the stainless header. Almost like aluminized metal? Or is it just the lighting in the photo? I'm all about a budget system, but aluminized tubing is where I have to draw the line.
No I got some stainless polish I got at Sams. Its stainless.
____________
Everybodys tyring to go green, I did years ago.
|
reynoldss
Expert Class
Posts: 207
|
posted June 10, 2012 05:37 AM
quote:
Patrick
Your exhaust looks good. Thats about the same clearance I had I just put a couple washers inbetween the lower radiator mounting brack and the block. (bigblock) Oh by the way I got great service from 58 cycle as I always have. Matt actually went outa his way to help me. Killer price as well
____________
Everybodys tyring to go green, I did years ago.
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted June 10, 2012 03:10 PM
Your exhaust looks good. Thats about the same clearance I had I just put a couple washers inbetween the lower radiator mounting brack and the block. (bigblock) Oh by the way I got great service from 58 cycle as I always have. Matt actually went outa his way to help me. Killer price as well
Nice! Glad they got you taken care of, He ended up taking care of me after i made it very clear that the time i had to wait was BS. And i noticed that the prices have now went up on 2 of the muzzy systems on 58's web site. My exhaust went up 40 bucks in price. So i am glad i bought it when i did.. Every little bit helps..
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
tour10
Parking Attendant
Posts: 19
|
posted June 11, 2012 06:52 AM
I love muzzy exhaust & have used them on my bikes since the mid-90's & even got muzzy slip-on's on my current 14 but............i will say there exhaust's are very dated looking compared to some other companys, i mean come'on they look identical to what i use't to run on my 94 zx9's & 97 zx7R
|
shiphteey
Needs a job
Posts: 2529
|
posted June 11, 2012 01:35 PM
The muzzys on the 2012 14R I ran was supposedly a "new for 2012" design. That is what Dave/Kurt had said from Muzzys. I didn't have a 2011 to compare to. Picked up about 8 HP over stock but it wasn't dynoed same day. Seems to be about inline with what others reported in terms of HP gain on the Brocks, don't know for sure.
A.
____________
Gemini Motorcycles
Topping out everything from Ninja 250s to nitrous ZX-14s.
|
burton
Novice Class
Posts: 80
|
posted June 11, 2012 07:45 PM
when
mine was stock with about 300 miles on it, the hp was
181.26 and torque was 107.98. after installing the muzzy exhaust and a pc5 the hp was 191,09 and the torque was 111.pp with very nice fuel curve of around 13.2 across the board
, bike is very smooth and very responses,check my previous post on here to see printout of dyno runs.Burt
|
zxninja
Novice Class
Posts: 67
|
posted June 11, 2012 09:19 PM
I got a yoshimura trc full
|
zxninja
Novice Class
Posts: 67
|
posted June 11, 2012 09:20 PM
anybody else got one
|
|
|
HOME
NEW TOPIC