smokinZX14
Needs a life
Posts: 10197
|
posted January 09, 2012 03:48 PM
 Edited By: smokinZX14 on 9 Jan 2012 23:49
quote:
quote:
Wee you're doing really good at your weigh and Im sure sooner or later you will be flying! I think the pill is way too low though but thats just my .02!! I shift at 11k rpm on my bike and I know the new 14r has better top end than the old 14
correct, I have a 10,600 and a 11,000, I can't find a 10,800 but looking at dyno charts a 10,800 would be better since the 14r does not drop hp at high rpm, so the next shift will be in better power range, I'll get one somewhere and run it. That tail rub was pretty serious, it did it in 2nd gear too, that had to have "some" effect on time, Litz shock is on it now so that issue is gone
wee
Wee MDS only sells them in sets.... I had to buy a set 10000 10200 10400 10600 10800 .. For my first pass i'm using the 10600, if everything feels ok i'll change it to 10800 ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
  
|
1badzx12r
Needs a life
Posts: 8321
|
posted January 09, 2012 04:42 PM
quote:
quote:
quote:
Most big guys like to throw out 'I'm too big' excuses as to why they can't go quick/fast; the plain truth is... I have only seen a handful who can actually RIDE. Well done.
Brock
www.BrocksPerformance.com
Then why do you have a 85lb jockey riding your bikes if size don't matter ..
try reading every word slowly, then post hehe
wee
maybe brock should hire you to test ride his bikes to sell parts instead of JT.. you had a gen 2 busa did you run 8.40's with all the brock goodies like JT did
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
1badzx12r
Needs a life
Posts: 8321
|
posted January 09, 2012 04:43 PM
quote:
quote:
quote:
Wee you're doing really good at your weigh and Im sure sooner or later you will be flying! I think the pill is way too low though but thats just my .02!! I shift at 11k rpm on my bike and I know the new 14r has better top end than the old 14
correct, I have a 10,600 and a 11,000, I can't find a 10,800 but looking at dyno charts a 10,800 would be better since the 14r does not drop hp at high rpm, so the next shift will be in better power range, I'll get one somewhere and run it. That tail rub was pretty serious, it did it in 2nd gear too, that had to have "some" effect on time, Litz shock is on it now so that issue is gone
wee
Wee MDS only sells them in sets.... I had to buy a set 10000 10200 10400 10600 10800 .. For my first pass i'm using the 10600, if everything feels ok i'll change it to 10800 ..
you can buy the chips off ebay seperately ...
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 09, 2012 04:51 PM
quote:
quote:
quote:
quote:
Wee you're doing really good at your weigh and Im sure sooner or later you will be flying! I think the pill is way too low though but thats just my .02!! I shift at 11k rpm on my bike and I know the new 14r has better top end than the old 14
correct, I have a 10,600 and a 11,000, I can't find a 10,800 but looking at dyno charts a 10,800 would be better since the 14r does not drop hp at high rpm, so the next shift will be in better power range, I'll get one somewhere and run it. That tail rub was pretty serious, it did it in 2nd gear too, that had to have "some" effect on time, Litz shock is on it now so that issue is gone
wee
Wee MDS only sells them in sets.... I had to buy a set 10000 10200 10400 10600 10800 .. For my first pass i'm using the 10600, if everything feels ok i'll change it to 10800 ..
you can buy the chips off ebay seperately ...
a 10,800? got a link?
wee
|
1badzx12r
Needs a life
Posts: 8321
|
posted January 09, 2012 04:57 PM
http://www.ebay.com/itm/MSD-RPM-Module-chip-pill-3000-11900-rpm-Viperizer-/350486908323?hash=item519aa5cda3&item=350486908323&pt=Race_Car_Parts&vxp=mtr
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 09, 2012 05:00 PM
quote:
http://www.ebay.com/itm/MSD-RPM-Module-chip-pill-3000-11900-rpm-Viperizer-/350486908323?hash=item519aa5cda3&item=350486908323&pt=Race_Car_Parts&vxp=mtr
that's who I get the 10,800's from, he said he didn't have them a few weeks ago, maybe he does now, Thanks
wee
|
1badzx12r
Needs a life
Posts: 8321
|
posted January 09, 2012 05:00 PM
http://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l2736&_nkw=msd+chip
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
JZX
Zone Head
Posts: 943
|
posted January 09, 2012 05:07 PM
If you need a 10.8, I have one
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
Lucky14
Pro
Posts: 1439
|
posted January 09, 2012 05:10 PM
quote:
quote:
http://www.ebay.com/itm/MSD-RPM-Module-chip-pill-3000-11900-rpm-Viperizer-/350486908323?hash=item519aa5cda3&item=350486908323&pt=Race_Car_Parts&vxp=mtr
that's who I get the 10,800's from, he said he didn't have them a few weeks ago, maybe he does now, Thanks
wee
That's where I got mine, but no 10.800.
Bought 10,700 and 10,900 (and 4000 for testing).
$6.49 each + $2.95 shipping.
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 09, 2012 05:11 PM
quote:
If you need a 10.8, I have one
can I borrow it? lol when are you coming by Farmers Branch I'll trade you a nice Muzzle for the chip?? Or I can come to Rockwall.
wee
|
JZX
Zone Head
Posts: 943
|
posted January 09, 2012 05:15 PM
we can meet somewhere, if your going to the track this weekend, I will make sure you have it by then.
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 09, 2012 05:24 PM
quote:
we can meet somewhere, if your going to the track this weekend, I will make sure you have it by then.
if the weather is good I'll be there,
wee
|
mathews
Expert Class
Posts: 425
|
posted January 09, 2012 05:36 PM
Why dont you come to HMP so I can put the smackdown on that beautiful 14?
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 09, 2012 05:57 PM
quote:
Why dont you come to HMP so I can put the smackdown on that beautiful 14?
need to get it tuned and a little more seat time before getting in the shark tank.
wee
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 11, 2012 03:11 PM
quote:
quote:
quote:
http://www.ebay.com/itm/MSD-RPM-Module-chip-pill-3000-11900-rpm-Viperizer-/350486908323?hash=item519aa5cda3&item=350486908323&pt=Race_Car_Parts&vxp=mtr
that's who I get the 10,800's from, he said he didn't have them a few weeks ago, maybe he does now, Thanks
wee
That's where I got mine, but no 10.800.
Bought 10,700 and 10,900 (and 4000 for testing).
$6.49 each + $2.95 shipping.
he want's $13 to mail 1 chip. I will do without, $6 for the chip and $13 to put it in an envelope? LOL
wee
|
1badzx12r
Needs a life
Posts: 8321
|
posted January 11, 2012 03:34 PM
Edited By: 1badzx12r on 11 Jan 2012 23:35
quote:
Bought 10,700 and 10,900 (and 4000 for testing).
$6.49 each + $2.95 shipping.
he want's $13 to mail 1 chip. I will do without, $6 for the chip and $13 to put it in an envelope? LOL
wee
looks like you must of piss him off
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 11, 2012 03:39 PM
quote:
quote:
Bought 10,700 and 10,900 (and 4000 for testing).
$6.49 each + $2.95 shipping.
he want's $13 to mail 1 chip. I will do without, $6 for the chip and $13 to put it in an envelope? LOL
wee
looks like you must of piss him off
he got me for the $13 envelope, I thought shipping would be $2.95 like his site says when I got to paypal, it didn't let me confirm payment, $19 10,900 chip coming.
wee
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted January 11, 2012 03:49 PM
wee, I told you I had one. You forgot to take it with you.
Ken
____________
Red 06 ZX14 RR
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 11, 2012 03:53 PM
quote:
wee, I told you I had one. You forgot to take it with you.
Ken
sure did.
wee
|
Lucky14
Pro
Posts: 1439
|
posted January 11, 2012 04:09 PM
quote:
he want's $13 to mail 1 chip. I will do without, $6 for the chip and $13 to put it in an envelope? LOL
wee
I didn't order off the site. I called them.
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
edszx14
Expert Class
Posts: 271
|
posted January 12, 2012 06:27 PM
Hey Wee, nice job on the bike and at the track. If you go the coming Sunday, I will try to come out and watch. Very nice times.
____________
Ed
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted January 12, 2012 06:35 PM
quote:
Hey Wee, nice job on the bike and at the track. If you go the coming Sunday, I will try to come out and watch. Very nice times.
Hi Eddie, I should be there, I'm trying to figure out why I'm not getting any lift from 1st to 2nd gear shift like my 09, some things I will try, I shortened the kill time and added a revalved shock, gonna go from there, I will have clutch shims to try if I'm not getting more mph than last week, trying to do adjustments one at a time to see what works. See ya there.
wee
|
|
|
HOME
NEW TOPIC