Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 25, 2011 03:30 PM
 Edited By: Wheelie on 25 Nov 2011 23:37
ZX14r Fairing Removal
Remove the foreman grills first, remove the three bolts, the one in the middle you need to separate it from the grill after taking it out, pull out on the lower rear, then the grills slide straight back towards the rear.
Next remove the lowers. There is one bolt behind the grills you need to remove so you can pull the lowers out to get a allen wrench and phillips scew out behind the lowers, it's a little difficult, use a flash light to see behind them, the the lower removes like a Gen I. Or you can leave them on.
Remove the push rivets
Remove the dash panels, lift up the back part. The fairings will slide straight back to the rider to remove.
if you need further assistance post up or pm me.
wee
  
|
02zx12rbob
Expert Class
Posts: 496
|
posted November 25, 2011 03:50 PM
Damm, that bike looks great already ! 
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 25, 2011 03:52 PM
Bob, call me
wee
|
Shane661
Needs a life
Posts: 11494
|
posted November 25, 2011 04:11 PM
Thanks Wee!
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 25, 2011 04:12 PM
quote:
Thanks Wee!
you're welcome
wee
|
JZX
Zone Head
Posts: 943
|
posted November 25, 2011 04:17 PM
Wee, did you measure the OD of the M14 head pipes?
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 25, 2011 06:49 PM
quote:
Wee, did you measure the OD of the M14 head pipes?
no
wee
|
LAB3
Needs a job
Posts: 2977
|
posted November 26, 2011 10:28 AM
Edited By: LAB3 on 26 Nov 2011 19:03
Wee with a Muzzy ???? Brocks Police is looking for a new leader :-)
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted November 26, 2011 12:40 PM
quote:
Wee with a Muzzy ???? Brocks Police is looking for a new leader :-)
HEHE
wee
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted November 26, 2011 03:28 PM
Very nice! do you need to shim the rad out for the Muzzy pipe?
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
01smokes
Needs a job
Posts: 2243
|
posted November 26, 2011 03:38 PM
I sure do like them stock wheels!!
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
JZX
Zone Head
Posts: 943
|
posted November 26, 2011 04:30 PM
quote:
Wee with a Muzzy ???? Brocks Police is looking for a new leader :-)
Ya'll can right me the ticket :-)
____________
06 ZX14 65"
Best 1/8 mile 5.68@126.4 on a 1.41 60'
Best 1/4 mile 8.87@152.7 on a 1.47 60'
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 03, 2011 01:55 PM
well I've taken the fairings of a couple of times, it's very easy, no need to take the lowers off, just leave them on and remove the side fairings in one piece.
wee
|
TH1RT3EN
Zone Head
Trial And Error Control
Posts: 722
|
posted April 01, 2012 05:14 PM
Thanks for the write up Wee! Made things very simple for the first removal.
Patrick
____________
There is a fine line between Fear and Respect
When I was a kid i used to........... Wait I Still Do That!
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 01, 2012 07:32 PM
quote:
Thanks for the write up Wee! Made things very simple for the first removal.
Patrick
I also posted it's easier to leave the lowers on when removing side fairings, glad that helped.
wee
|
JP ZX 14 R SE
Parking Attendant
JP
Posts: 1
|
posted April 06, 2012 10:24 PM
Great tech support, I got the factory manual and it's useless
thank's
Jpzx 14 R SE
____________
JP ZX 14 R SE
|
venomous_zx
Expert Class
2012 14r - low and long-
Posts: 321
|
posted April 07, 2012 05:37 AM
Digging the muzzys wee!
____________
sensei
|
|
|
HOME
NEW TOPIC