Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 06, 2011 04:06 AM
Competition CNC's LSR/Drag Bike....
We finally got a chance to start the tuning process of the new combo on the race bike.
We made a few pulls and got the A/F dialed in close, but it needs more tweaking. Theres a bunch of things we want to try on the dyno, so it will be a few weeks before we settle in on a final setup. I think there's a little more power left in it at this point.
The other run is a stock zx14 on the same dyno just for comparison.
____________
Y2KZX12R
CompetitionCNC.com
   
|
Ratfink
Novice Class
Posts: 93
|
posted June 06, 2011 04:40 AM
i need that set up so i can hurt peoples feelings at the track
|
CajunBoyz
Zone Head
Posts: 702
|
posted June 06, 2011 05:22 AM
quote:
We finally got a chance to start the tuning process of the new combo on the race bike.
We made a few pulls and got the A/F dialed in close, but it needs more tweaking. Theres a bunch of things we want to try on the dyno, so it will be a few weeks before we settle in on a final setup. I think there's a little more power left in it at this point.
The other run is a stock zx14 on the same dyno just for comparison.
Could this setup be made into a RELIEABLE street set up?? @ what HP???
____________
"Cajun Boyz with Bad Ass Toys"
|
1badzx12r
Needs a life
Posts: 8321
|
posted June 06, 2011 07:54 AM
 Edited By: 1badzx12r on 6 Jun 2011 15:55
100hp roughly
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
oldkawboy
Needs a job
Posts: 2125
|
posted June 06, 2011 08:22 AM
Wow.....great numbers Jim, that thing is gonna fly!
I like how it makes the same power at 7k as the stocker does at peak.
Did you extend the ECU an extra 1,000ppm or so?
Dan
|
entropy
Moderator
Posts: 8671
|
posted June 06, 2011 09:21 AM
awesome, Jim!!!!!! :BIGTHUMB
now get the logging set up, all those lil LSR things ready for Loring and LET THE GAMES BEGIN!!!!
____________
This moderator uses moderation in moderation
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 06, 2011 05:24 PM
We have a good 2x5 combo that makes 245-250 hp and can be ridden on the street on super pump gas. There are a few of our customers that ride them on the street.
Dan, Yea, the rev limiter is now 12,200. The graph will smooth out considerably and be about 10 hp higher in the mid range once we get it dialed in.
Karl, Its gonna be tough running against those big motor Busas. We have our work cut out for us.
____________
Y2KZX12R
CompetitionCNC.com
|
oldkawboy
Needs a job
Posts: 2125
|
posted June 06, 2011 08:09 PM
quote:
Karl, Its gonna be tough running against those big motor Busas. We have our work cut out for us.
And also with the frame design & lay down tanks it's gonna be tough beating those Boosa's!!
I'm sure looking forward to it.
Dan
|
madnessracing
Pro
Vmax and Busa Beater
Posts: 1140
|
posted June 06, 2011 08:59 PM
Can the 2x5 combo take nitrous? If so how big a shot can it take?
____________
Shorty's Performance
Team Madness Racing
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 07, 2011 12:18 PM
quote:
Can the 2x5 combo take nitrous? If so how big a shot can it take?
Yep, you can spray a 120 dry shot on a 2x5 with our custom nitrous pistons.
____________
Y2KZX12R
CompetitionCNC.com
|
osti33
Needs a job
Posts: 2973
|
posted June 07, 2011 08:17 PM
WOW!! That is a serious engine. Great job Jim. 
|
Y2KZX12R
Needs a job
CompetitionCNC.com
Posts: 3762
|
posted June 08, 2011 02:26 AM
Thanks Ryan, were trying to compete with those big busas. 
Its going to be tough giving up 65 cc to them.
____________
Y2KZX12R
CompetitionCNC.com
|
|
|
HOME
NEW TOPIC