HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Installed my New Vance & Hines 4 into 1 NEW TOPIC NEW POLL POST REPLY
Big_T112


Pro
Posts: 1061
posted April 30, 2011 06:09 AM        
Installed my New Vance & Hines 4 into 1

On my all original 33 year old 78 Kawasaki KZ1000. I found it new on Ebay. I just hated the stock exhaust. So I got the V & H header off of Ebay for $283 dollars. I wanted the KerKer but they were over $500 so I got the V&H. Was a breeze to install. It's got the street baffle so it's not too loud. runs and sounds perfect. This thing is a great bike to get out on and cruise. I also found a complete original seat that I got on Ebay. It will be in next week. I still have the spoke wheels that came on it but I like the Tubeless mag LTD wheels that were on it. This was a common upgrade for these bikes. Here are a couple of pics.

Side





  Ignore this member   
zixxer14


Pro
Damn that was Quick
Posts: 1233
posted April 30, 2011 06:34 AM        
Somebody set a couch on your bike!
  Ignore this member    Click here to visit zixxer14's homepage. 
Big_T112


Pro
Posts: 1061
posted April 30, 2011 07:38 AM        
Yea that has to be the worst seat cover I have ever had. But I did find an original seat that had been taken off when it was new and stored. It will be here next week. Believe it or not the seat pan looks like new. They are made of metal and are really hard to find not rusted out. I will keep it for later use.
  Ignore this member   
WARBIRD


Needs a job
Posts: 2739
posted April 30, 2011 09:06 AM        
Look's great Big........ I bought the green one new in 78 as well as the Z1R. Dan (oldkawboy) has one as well, not sure if his is a 78 or 77.
____________
I'd Rather Be Roadracing.

  Ignore this member   
Lou D


Novice Class
Posts: 35
posted April 30, 2011 04:43 PM        
I had a 1978 Z1-R with that sharp little fairing, drilled out discs and a kick starter that bolted under the seat. And yep, I put a Kerker on her. Great bike. Good luck.
  Ignore this member    Click here to visit Lou D's homepage. 
02zx12rbob


Expert Class
Posts: 496
posted May 01, 2011 08:55 AM        
Good lookin bike. I still have a '77 with a LTD seat and a Kerker 4-1.
  Ignore this member   
Chaz


Novice Class
Posts: 46
posted May 01, 2011 03:33 PM        
Very nice!
Brings back a lot of memories.

I had a 1977 KZ650C1 with a "Denco" header.
Back then, the sound that the exhaust made was very new and very uncommon.
I put nearly 80k miles on that bike in 2 1/2 years.

When I bought my 1980 GS1100E, I put a Vamce & Hines 4 into 1 exhaust on it as soon as I was able to afford it. Oh did it sound so cool!
____________
2007 Plasma Blue ZX14, 1464 cc 2mm Bore X 2mm Stroke, OER Hi-Mounted Full Exhaust System, PC3, KN Air Filter, SpeedoHealer, Flies Out, FP Velocity Stacks, 0/+1, HotBodies Undertail, Lowered 1", ZG Dbl Bbl, ZX14 Chain Guard, Cox Racing Radiator Guard, HID Lights 6K-Lo / 8K Hi, Adj Side Stand, and a Stem mounted Valentine Radar Detector

  Ignore this member   
Audioboyz


Expert Class
Posts: 265
posted May 01, 2011 04:04 PM        
I had a 1975 Z-1B 900.At that time it and the H-2 750 Kaws were the baddest bikes around.I put a set of Hooker Headers on it.It was my first real bike and I had i tooth down on the front and had green Kawasaki racing shocks and drag bars.I also had a 81,82,and 83
GS1100E bikes.The 82 had racing carbs and a Yosh pipe.They were fun bikes.And yes I
had a 83 GPz 1100.That bike had balls.
Craig
____________
2009 Monster ZX-14
Brocks Alienhead,PCV, flys out,LSL Riser kit,-1 front sprocket,43 Vortex rear sprocket,K&N Air Filter, Zero Gravity tall smoked screen,block off plates,175HP 104 torque

  Ignore this member   
Bigbore4


Zone Head
Posts: 806
posted May 01, 2011 06:23 PM        
That was my first street bike. Bought a new 78' from a dealer in wichita. Got a kerker exhaust from a guy who wanted a stock setup, so I traded straight across and put some k&N filters on it.
RAn it at the wichita strip a couple times, also my first go round on a strip, best I ran was a 12.3 @ 112. I remember a guy on an H2 750 with a bar that was running well in the 9's. He said the biggest issue he had with it was the vibration, said it was so bad on the top that he had trouble keeping his hands on the bars!

  Ignore this member   
Big_T112


Pro
Posts: 1061
posted May 01, 2011 07:01 PM        
I ran it today at the 1/8th mile dragstrip in Columbus Miss. Me and some buddys rode over to the strip. I was on the KZ. Best time was a 8.09 in the 1/8th. It has a hard rear tire and would spin really bad if you hit it to hard off the line. 135 mile round trip. Bike performed flawless. I too had a 78 Z1R. I had put it on Ebay and a bike shop in Japan snapped it up. I wish I had never sold it.
  Ignore this member   
dcjens


Pro
Wet side of Washington
Posts: 1059
posted May 02, 2011 07:51 PM        
right on! my first car was a 77 KZ650 with a Kerker. Ive also had 2 of the 77 KZ1000/ Kerker and a 75 Z-1900 all when I was an impressionable young lad~ and that is 1 ugly seat up der! a couch is right!
____________
Black 06

  Ignore this member   
All times are America/Va < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Installed my New Vance & Hines 4 into 1 NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.21319913864136 seconds processing time