head_zx14ninja
Novice Class
2010 xz14
Posts: 59
|
posted April 18, 2011 08:02 PM
PCV map help
Hey guys,
The map I have loaded on my PCV is the one supplied by Dynojet for an 07 model with a full Yoshimura TRC and flies out.
My first question is, because the map is for an 07 will it have any adverse effects on my 10 model? Also can I use or can anyone help me with a map better suited for my mods (as listed in my signature)?
I will have my bike dyno tuned as soon as the finances allow, but I have been out of work for a month now due to loss of license (I'm a truckie) and I'm worriedabout riding the bike to work in case it's running much to lean etc.
Any help or advice would be much appreciated.
Cheers
Martin
____________
“One thing leads to another”? Not always. Sometimes one thing leads to the same thing. Ask an addict.
  
|
wrongway
Pro
Posts: 1078
|
posted April 19, 2011 05:24 AM
is there '07 maps for PCV ? or did you convert a PC3 map ?
the 07 map will be richer from 3k -6k because the '10 model ecu opens the flies faster and would need less extra fuel.
Roy
|
head_zx14ninja
Novice Class
2010 xz14
Posts: 59
|
posted April 19, 2011 06:38 AM
It was an 07/08 map and I didnt do any converting. The file extension was the Pcv type...
____________
“One thing leads to another”? Not always. Sometimes one thing leads to the same thing. Ask an addict.
|
jetskidave
Expert Class
Posts: 154
|
posted April 20, 2011 07:57 PM
call me at 931-607-6300 i have a custom map for the 2010 zx 14 i. just sold
____________
2014 ZX14R Flat Black
Akrapovic 4 into 1 exhaust CNC Performance high performance street motor stock bore 14 to 1 CP pistons
CNC ported head, Cams, 48mm Bored throttle bodies, complete blueprinted engine,
10 Over Adams arm, GPR stabilizer, air shifter, quickshifter Guhl reflash ECU with duel maps installed in the ECU.
243hp, 302 hp on Nitrous progessive controller. BST carbon rims
|
jetskidave
Expert Class
Posts: 154
|
posted April 20, 2011 07:58 PM
fyi, used to have a yoshi just like yours on my 2010.
____________
2014 ZX14R Flat Black
Akrapovic 4 into 1 exhaust CNC Performance high performance street motor stock bore 14 to 1 CP pistons
CNC ported head, Cams, 48mm Bored throttle bodies, complete blueprinted engine,
10 Over Adams arm, GPR stabilizer, air shifter, quickshifter Guhl reflash ECU with duel maps installed in the ECU.
243hp, 302 hp on Nitrous progessive controller. BST carbon rims
|
head_zx14ninja
Novice Class
2010 xz14
Posts: 59
|
posted April 20, 2011 09:16 PM
Thanks jetskidave! I'm In Australia, Where exactly are you city/state/country etc? Reason is if we are in totally different timzones I don't want to ring you at 2am in the morning and wake you up.
Thanks again.
____________
“One thing leads to another”? Not always. Sometimes one thing leads to the same thing. Ask an addict.
|
jetskidave
Expert Class
Posts: 154
|
posted April 21, 2011 12:20 PM
central time zone
____________
2014 ZX14R Flat Black
Akrapovic 4 into 1 exhaust CNC Performance high performance street motor stock bore 14 to 1 CP pistons
CNC ported head, Cams, 48mm Bored throttle bodies, complete blueprinted engine,
10 Over Adams arm, GPR stabilizer, air shifter, quickshifter Guhl reflash ECU with duel maps installed in the ECU.
243hp, 302 hp on Nitrous progessive controller. BST carbon rims
|
head_zx14ninja
Novice Class
2010 xz14
Posts: 59
|
posted April 21, 2011 06:44 PM
Central time zone? Could you give me a state please?
____________
“One thing leads to another”? Not always. Sometimes one thing leads to the same thing. Ask an addict.
|
jetskidave
Expert Class
Posts: 154
|
posted April 21, 2011 10:01 PM
tennessee, hot and humid in the summer.
____________
2014 ZX14R Flat Black
Akrapovic 4 into 1 exhaust CNC Performance high performance street motor stock bore 14 to 1 CP pistons
CNC ported head, Cams, 48mm Bored throttle bodies, complete blueprinted engine,
10 Over Adams arm, GPR stabilizer, air shifter, quickshifter Guhl reflash ECU with duel maps installed in the ECU.
243hp, 302 hp on Nitrous progessive controller. BST carbon rims
|
head_zx14ninja
Novice Class
2010 xz14
Posts: 59
|
posted April 25, 2011 01:51 AM
Hey Dave,
Mate for the life of me i can't get through to you on the phone. I'm going to purchase a calling card tomorrow and try call you that way. I hope i can get through then.
Cheers
Martin
____________
“One thing leads to another”? Not always. Sometimes one thing leads to the same thing. Ask an addict.
|
|
|
HOME
NEW TOPIC