RICH CRAFT 1
Zone Head
Posts: 681
|
posted March 09, 2011 09:15 AM
Brute horsepower dyon test in Florida
Anybody know what's going on at this show! It's supposed to go Monday through Saturday since it's sponsored by BMW I'm sure Brock will be there. Anybody know who's going to represent Kawasaki? Smokin, you're probably closer than anybody have you heard anything.
Ken
____________
Red 06 ZX14 RR
  
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 09, 2011 05:44 PM
Yes i heard about it off Brocks face book page ..Brock said he would be there everyday this week .. I'm not going myself , my bike only makes 175 hp so no way would i put my bike on that dyno ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted March 09, 2011 10:32 PM
would be nice to see if it puts down 175 on the same dyno that the bmw makes monster hp on.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
BobK
Expert Class
2012 ZX14R SE
Posts: 195
|
posted March 10, 2011 07:44 AM
I was there yesterday and put my 07 ZX14 on the dyno. 1st place was a gixer with 217hp 2&3rd were also gixers but those two were around 181. I got on and did 191.7hp on 93 octane. That was good enough for 2nd. I came back later and a guy running a street/strip Busa with extended arm, nitrous although he said he wasn't using it and really didn't appear to be made 199hp. That put me in 3rd. I probably could have matched that with the right fuel which he appeared to be using from the grey color of his exhaust but I wasn't in the mood to stay any longer and it was supposed to rain today which it is and my bike is strictly a street bike. I guess we will have to wait for Saturday to see how it shakes out.
My motor was done by Sal at Ace performance and only has porting, shaved head for 93 octane and degreed cams so I was quite happy with the results.
|
SteddyTeddy
Pro
Posts: 1664
|
posted March 10, 2011 08:11 AM
I'm riding over tommorrow to Daytona. May have to run up there and check it out.
|
NinjaNick
Needs a job
'08 ZX14 (Blue)
Posts: 4558
|
posted March 10, 2011 08:40 AM
Damn dyno queens! lol
j/k 
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted March 10, 2011 08:40 AM
Thanks guys for the response, I really wanted to see if Brocks was bringing a BMW? And if anybody would be showing up with a new ZX10? Somebody said RG got a new one and I know he goes down there. I guess the real question is if anybody shows would it be apples for apples! Saturday will be the superbike race and then we'll have a better ideal about what's going on.
Ken
____________
Red 06 ZX14 RR
|
Phantom13
Zone Head
Posts: 736
|
posted March 10, 2011 09:06 AM
NICE BOB!!!
Glad to see you're enjoying your Stage 1 ZX-14 up there in Daytona.
191+rwhp on pump is sweet, what were the torque numbers like? Any idea what the stock motor piped and tuned 14's were making on the same dyno, same day?
____________
"The only place Success comes
before Work is inside the Dictionary."
|
BobK
Expert Class
2012 ZX14R SE
Posts: 195
|
posted March 10, 2011 09:57 AM
Mike, they didn't hook the bikes up for torque readings. I didn't hang around to see who else was running. I wanted to go ride the Ducati Diavel but couldn't find Ducati where they usually are.
|
IMFASTTOO
Zone Head
Posts: 567
|
posted March 10, 2011 05:53 PM
LAST YEARS RESULTS http://news.wyotech.edu/wp-content/uploads/2010/03/2010-brute-horsepower-shootout-final-results.pdf
|
BobK
Expert Class
2012 ZX14R SE
Posts: 195
|
posted March 12, 2011 12:42 PM
I talked to a friend who told me I kept the number 3 spot till the end. Not bad for just a stage 1 from Ace Performance! I might have to think about stage 2 for next year.
|
IMFASTTOO
Zone Head
Posts: 567
|
posted March 12, 2011 03:56 PM
quote:
I talked to a friend who told me I kept the number 3 spot till the end. Not bad for just a stage 1 from Ace Performance! I might have to think about stage 2 for next year.
SO what are your numbers ?
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 12, 2011 04:23 PM
He said he got 191.7 on 93 pump gas in his first post.
|
ZX14Mike
Zone Head
Posts: 891
|
posted March 12, 2011 04:25 PM
There's that reading comprehension problem AGAIN Art!!!!!!!!!!!!!!
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 12, 2011 04:32 PM
quote:
There's that reading comprehension problem AGAIN Art!!!!!!!!!!!!!!
LOL
|
BobK
Expert Class
2012 ZX14R SE
Posts: 195
|
posted March 12, 2011 04:45 PM
Look At my first post.
|
IMFASTTOO
Zone Head
Posts: 567
|
posted March 12, 2011 07:11 PM
OK OK DUH
|
Ratfink
Novice Class
Posts: 93
|
posted March 13, 2011 07:37 AM
thats sweet with just a head swap id love to see a stroked and bored motor rule on this comp
|
IMFASTTOO
Zone Head
Posts: 567
|
posted March 13, 2011 08:16 AM
ARE there any results posted by WYOTECH ?
|
ZX14Mike
Zone Head
Posts: 891
|
posted March 13, 2011 11:02 AM
Yep..........the winner 1001cc-1500cc was a 1K Gixxer that put out 218
|
Phantom13
Zone Head
Posts: 736
|
posted March 13, 2011 01:18 PM
quote:
I talked to a friend who told me I kept the number 3 spot till the end. Not bad for just a stage 1 from Ace Performance! I might have to think about stage 2 for next year.
Nice. Fuuny thing is that your bike is tuned for REAL WORLD performance, not big dyno numbers. I'm sure if you leaned it out and ACE set-up the cams for peak HP, you'd see 200+rwhp on PUMP gas with the stock cams, stock throttle bodies, and STAGE 1 ACE head.
But you know Sal at ACE... He doesn't build dyno queens, he only puts out the real deal..
____________
"The only place Success comes
before Work is inside the Dictionary."
|
IMFASTTOO
Zone Head
Posts: 567
|
posted March 13, 2011 03:17 PM
WHERE are they posted ??
|
ZX14Mike
Zone Head
Posts: 891
|
posted March 13, 2011 04:15 PM
On Brock's FB page
|
SteveWFL
Moderator
Posts: 27920
|
posted March 13, 2011 08:45 PM
I posted results in my thread I had started about this event: http://www.bikeland.org/board/viewthread.php?FID=27&TID=60411&set_time=
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
Phantom13
Zone Head
Posts: 736
|
posted March 17, 2011 02:06 PM
Just got some info on what some of the Piped/Tuned ZX-14's were making on that dyno...
174-175rwhp
That's approx. a 17-18rwhp gain with your Stage 1 ACE head and degreed stock cams with a real safe tune. Not too shabby!!!
If you had some race fuel, you would have been making that 207rwhp GSX-R sweat bullets!
____________
"The only place Success comes
before Work is inside the Dictionary."
|
|
|
HOME
NEW TOPIC