bradkong12
Expert Class
Posts: 250
|
posted March 08, 2011 02:59 PM
SHINKO U-SOFT ???
shinko u-soft PSI and burnout time ?????????????
R 10psi and 5seconds n the ball park??????
____________
bradkong12
  
|
Shane661
Needs a life
Posts: 11494
|
posted March 08, 2011 03:02 PM
With a shitty track you might need 10 psi...I would start at 20 psi. I would heat it side to side, say 1.5 seconds on each side, and 2 seconds down the middle..
|
ninjaboy311
Zone Head
Posts: 940
|
posted March 08, 2011 03:11 PM
Wheelbase and track conditions will dictate the pressure. As Shane said, start out high and lower as needed for traction.
____________
Naarden Speedlinks Sponsored Rider
Schnitz Racing Sponsored Rider
8.74 @ 152 on stock motor and MR9 (Muzzy Powered), 205 lbs suited
|
kaw-rick
Pro
Posts: 1167
|
posted March 08, 2011 03:12 PM
i love that tire, used to run 17-19 psi
|
Ratfink
Novice Class
Posts: 93
|
posted March 09, 2011 09:02 AM
 Edited By: Ratfink on 9 Mar 2011 17:03
i run 21psi swb and 14psi at 68 in on a 003a
|
01smokes
Needs a job
Posts: 2243
|
posted March 09, 2011 12:39 PM
I ran 40 psi just to see If it would hold swb with a 008 60' in the 1.50-1.52s on the booza. I hope I McCann get away with about 15-18 now that its 67" long.
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
|
|
HOME
NEW TOPIC