Sticks_n_Stones
Needs a job
Posts: 3930
|
posted March 07, 2011 10:45 AM
 Edited By: Sticks_n_Stones on 7 Mar 2011 20:13
Call out in Alberta, Canada: 600cc bike versus 600hp Mustang. Takers?
Hey guys, how's it going? Long time since I posted up in this section, I know. But this is the only place I know where Canadian's hang out!
Which brings me to the thread title: guy with 600rwhp Cobra brags on killing bikes, a friend of mine goes and finds a identical Cobra and beats that guy but he doesn't believe it. So I am offering $150 to the winner of a race to 140mph, starting at either a dig or up to 60mph roll-- to be decided by the guys racing.
This should have ended it (identical built/power Cobra against a bone stock GSXR600) but this guy claims the cobra drivers sucked and it's why they lost)
http://www.youtube.com/watch?v=X1Y5zzxG4uE&feature=player_embedded
This is the forum where I finally had enough and put money out:
http://www.svtperformance.com/forums/pics-videos-buffet-149/726633-race-results-cobras-vs-600-daytime-video.html
This is my GM forum thread that was the final nail in the coffin:
http://www.ls1tech.com/forums/street-racing-kill-stories/1394041-z28-r1.html
I'm needing a 600 rider who is light and experienced: mods are ok on the bike, so I figured one of you had to know a drag racer up there who has/runs a 600. ?? Here is the specifics:
CAR:
2003 SVT WHIPPLE COBRA his car runs 1/4 Mile: 11.22@ 127.00
2.3L Whipple 17 lbs all the boltons / IRS / 6Speed
666 RWHP 691 RWTQ on the baby shot (no nitrous to be used for this race, unless the bike gets it, too. Race gas or not is up to racers)
PLACE:
Edmonton Alberta or Grande Prairie Alberta -Can meet in Either city. Reddeer or Calgary might be doable as well though its a bit of a trek
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
  
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted March 07, 2011 12:08 PM
based on the numbers that each of those will run at the drag strip, I'd say the cobra should win. If you take the average 600 rider out on the street and put them up against a 600hp cobra it's not even going to be a race. The cobra will walk it all day long. Hell, most 600's that come out to the drag strip struggle to even get into the 7's in the 1/8th. An 03/04 cobra with nothing but pipes, tune, cold air, and a 2.8 pulley will run in the mid-low 7's all day long (or until it breaks a half shaft lol). The only saving grace that a 600 would have is that the SVT is going to be very very traction limited.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted March 07, 2011 12:12 PM
his car runs 1/4 Mile: 11.22@ 127.00
A good rier on a stock 600 would be a good run. A modded 600 with a rider with good roll racing experience should walk him.
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
LeonidasZX14
Pro
Posts: 1277
|
posted March 07, 2011 03:11 PM
I've been 10.02 back in 02' on a 600. I would have walked his ass but in most cases I give it to the Mustang. Not being cocky or trying to be arrogant either but I will be bringing my bone stock 600 to the track soon and think it will run 10.50's...Maybe???
____________
09' ZX14
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted March 07, 2011 05:09 PM
quote:
I've been 10.02 back in 02' on a 600. I would have walked his ass but in most cases I give it to the Mustang. Not being cocky or trying to be arrogant either but I will be bringing my bone stock 600 to the track soon and think it will run 10.50's...Maybe???
10.5 would be hard to do stock gearing/height/length. Possible if you are both a good drag racer and persistent... and willing to roast a clutch. lol
You wouldn't happen to be up in Canada, would ya? lol
Speaking of which: anybody know what web sites the Canadian drag racers use? I'm in a hurry to give this money away apparently. 
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
sceptre
Novice Class
Posts: 32
|
posted March 07, 2011 08:29 PM
I'm in GP....got my wife's 04 600RR all ready to roll come spring!
____________
2008 ZX-14 SE
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted March 07, 2011 09:08 PM
Edited By: Sticks_n_Stones on 8 Mar 2011 05:08
quote:
I'm in GP....got my wife's 04 600RR all ready to roll come spring!
Hell yeah,, wanna do this?? That '04 is modded, right? A stocker isn't gonna do the trick here.
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
01smokes
Needs a job
Posts: 2243
|
posted March 07, 2011 11:36 PM
Its all in the roll you go from. 70mph and above the 600 is dead in the water from a 60 it will be close from a dig it wont be a race the 600 will kill it. I've races MANY MANY 600+ HP cobras and supras on my 07 cbr600rr...
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted March 08, 2011 12:16 AM
____________
'06 Passion Red ZX-14
*Lee*
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted March 08, 2011 12:27 PM
Come on fellas, especially you sceptre: hook one of your friends up with an easy $150! Someone's gotta know someone who lives up there. A days wages for a few minutes ass kicking.
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
sceptre
Novice Class
Posts: 32
|
posted March 08, 2011 06:22 PM
I probably wont win...but I'll give it a hell of a try.
Filter, yosh exhaust, PCIII and regeared. It goes pretty good for a 600
____________
2008 ZX-14 SE
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted March 08, 2011 07:26 PM
quote:
I probably wont win...but I'll give it a hell of a try.
Filter, yosh exhaust, PCIII and regeared. It goes pretty good for a 600
PM SENT!
Feel free to argue the starting and stopping point-- this all started with him racing a 600cc from something like 40 or 50mph to 130mph, if your bike struggles alot past 130mph then we should be able to work it out.
Posting it on the SVT forums. 
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted March 09, 2011 05:35 PM
Sceptre, what's up? No replies to my PMs and nothing posted up on the SVT forums. Change your mind on doing it? It's understandable, just let us know!
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
sceptre
Novice Class
Posts: 32
|
posted March 09, 2011 06:17 PM
didn't get any PM's....and I definitely dont look on ford (sorry...puked a little) forums
____________
2008 ZX-14 SE
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted March 09, 2011 07:30 PM
quote:
didn't get any PM's....and I definitely dont look on ford (sorry...puked a little) forums
Well I can't play middleman. I'll see if he wants to come here and set it up with you.
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
SonicCobra
Parking Attendant
Posts: 1
|
posted March 09, 2011 09:47 PM
Hello Biker guys.
SNS is posting for me i guess. The car listed is not the car racing however its similar power wise on boost only. He has also run the same track times as i have.
Anyway im happy to play with a modded bike
Me vs GSXR 600 Second gear.
http://www.youtube.com/watch?v=X1Y5zzxG4uE&feature
Me Vs same bike him in first me in second
http://www.youtube.com/watch?v=H3p0e3Opsb0&feature=related
1000 CC ninja both with passengers lol
http://www.youtube.com/watch?v=8UnOd0ycGO4&feature=related
Car is way faster on the street than the track so the times are deceiving.
My Cobra will probably be gone but i would be happy to race any stock or modded 1000CC bikes that are around. The car im replacing mine with is a touch faster
Anyway PM me on here and im happy to set up any pulls once this god damn snow is gone
____________
Yes its a ford, Yes its fast, No i wont trade you for your wife
|
3000psi and falling
Zone Head
Posts: 848
|
posted March 09, 2011 10:38 PM
Where the heck are all you street racers at in my town? Soon as me and my 14 hit the streets lookin for some fun, its like a turd in the pool! every bike, stang, vett or fast and the delirious riced out car within a hundred miles disappears! Washington blows, someone point me towards Houston Texas.
Your stang sounds great and has lots of balls, but going after 600cc bikes and doubled up track bikes? Hell my lawn mower is around 800cc lol, Id like to see a vid of you racing a competent rider on a zx-14 or Busa, or how about a s1000rr from a roll on? You will learn a whole new meaning to the word fast.
____________
08 ZX14, 2010 Persimmon Red bodywork.
Flies pulled, 16-42, BMC street, 8" extensions, drag shock, cut pan, Cycle Concepts Drag Pack and springs, muzzy m14 w/ oval can, lowered, Shinco usoft rear, pcv with autotune, leightweight Shori 18ah battery, throttle meister. 500lbs at bandimeres scales with half tank of juice.
|
NinjaNick
Needs a job
'08 ZX14 (Blue)
Posts: 4558
|
posted March 10, 2011 03:21 AM
Edited By: NinjaNick on 10 Mar 2011 11:23
nevermind.
|
LeonidasZX14
Pro
Posts: 1277
|
posted March 11, 2011 08:25 PM
quote:
quote:
I've been 10.02 back in 02' on a 600. I would have walked his ass but in most cases I give it to the Mustang. Not being cocky or trying to be arrogant either but I will be bringing my bone stock 600 to the track soon and think it will run 10.50's...Maybe???
10.5 would be hard to do stock gearing/height/length. Possible if you are both a good drag racer and persistent... and willing to roast a clutch. lol
You wouldn't happen to be up in Canada, would ya? lol
Speaking of which: anybody know what web sites the Canadian drag racers use? I'm in a hurry to give this money away apparently.
Went 10.64 tonight right off the trailer on a stone stock 600 including stock height. FUN FUN FUN Oh, and I smoked a BMW 1000 that ran a 10.84 so 10.50s are very possible.
____________
09' ZX14
|
dakota9498
Pro
Posts: 1181
|
posted March 11, 2011 09:14 PM
Awesome, I knew that thing would fly with you on it. I miss riding a stock wheelbase bike.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
|
|
HOME
NEW TOPIC