Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 03, 2011 07:38 PM
Ordered an arm today!
Well placed my order for an Evil arm 64 to 68 over with air tank and nos bottle holder! can't wait to race season!
  
|
quick6
Expert Class
Posts: 257
|
posted March 03, 2011 09:12 PM
you will be pleased. those are nice arms. had one on a friends 14.
____________
2006 zx14, fully dressed and sliding(Charlie Sheen)
|
01smokes
Needs a job
Posts: 2243
|
posted March 03, 2011 11:14 PM
I got one on my genII its a nice arm. I'm also 64-68
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
Swiftkart
Expert Class
Posts: 349
|
posted March 04, 2011 04:53 AM
I ordered one last week as well and can't wait to see it, 66-70 for me.
____________
2006 ZX14, Brock CT-Meg, PC, ignition module, E85, 214 lbs suited, 8.96@152.32 1.46 60'
|
dakota9498
Pro
Posts: 1181
|
posted March 04, 2011 05:04 AM
If you dont mind Swiftkart, what did that 66-70 arm run you?
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
Superman T
Pro
Posts: 1831
|
posted March 04, 2011 05:40 AM
quote:
Well placed my order for an Evil arm 64 to 68 over with air tank and nos bottle holder! can't wait to race season!
Bently- Where did you get it? Approx cost?
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 04, 2011 09:57 PM
right from evil 650 tmd nos holder and air tank 3 hole adjusters in the back
|
johnsonzx14
Expert Class
Posts: 487
|
posted March 05, 2011 06:59 AM
what kind of brake arm do they come with?
|
kawasakijockey
Pro
Posts: 1876
|
posted March 05, 2011 08:37 AM
It uses the factory brake bracket and a turnbuckle strut to keep it in position.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted March 05, 2011 09:26 AM
Then you better set it at 68" because at 68" the front wheel will still be in the air if you want a decent 60 foot.
Ken
____________
Red 06 ZX14 RR
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 05, 2011 09:42 AM
Why I've ran at 64 inches before with 1.42 60 fts
|
CraigChrist
Pro
BAWLS
Posts: 1043
|
posted March 05, 2011 09:55 AM
+1, I did 1.42 at 63" foot shifting on 16/46 gearing. dad (TNT) has done 1.40 at 63" with 16/48 gearing.
____________
60ft-------1.42
1/8th------5.97
mph-------119
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted March 05, 2011 11:19 AM
I'm at 66" and I wouldn't mind going a couple inches longer. Mine will still wheelie
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
01smokes
Needs a job
Posts: 2243
|
posted March 05, 2011 12:22 PM
I regret not getting a 68-72 arm now that I have mine.
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
Swiftkart
Expert Class
Posts: 349
|
posted March 06, 2011 06:42 PM
quote:
If you dont mind Swiftkart, what did that 66-70 arm run you?
The zx14 arm is $600 with no under bracing, $50 for bottle bracket, $50 for 3 hole adjusters, $40 for chain guard, $25 shippings, total $765, Bently says he got his for $650 shipped, but I'm not sure if it has everything I listed.
____________
2006 ZX14, Brock CT-Meg, PC, ignition module, E85, 214 lbs suited, 8.96@152.32 1.46 60'
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 06, 2011 07:44 PM
I got bottle bracket, air tank, 3 hole adjusters. did not need chain gaurd. he told me bottle bracket and air tank were standard.
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted March 06, 2011 07:49 PM
Please post some pics when you get it!
|
01smokes
Needs a job
Posts: 2243
|
posted March 06, 2011 09:52 PM
quote:
I got bottle bracket, air tank, 3 hole adjusters. did not need chain gaurd. he told me bottle bracket and air tank were standard.
They come with bottle TABS no bracket i thought the same thing, and now add in some bearings and the price is about 90 bucks more...
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted March 07, 2011 02:25 AM
I remember reading they don't come with bearings.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 07, 2011 03:57 AM
quote:
quote:
I got bottle bracket, air tank, 3 hole adjusters. did not need chain gaurd. he told me bottle bracket and air tank were standard.
They come with bottle TABS no bracket i thought the same thing, and now add in some bearings and the price is about 90 bucks more...
Okay tabs as far as I know noone throws in the actuall nos bracket.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 07, 2011 03:58 AM
quote:
I remember reading they don't come with bearings.
They have bronze bushings up front same as an adams arm. the bearings they do not come with are the ones for the lowering links which I will just use the ones out of my stock arm.
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted March 18, 2011 03:28 PM
Just ordered an evil arm myself.
Flat black
7-11" over
Chainguard
Single axle adjuster
Non-braced
Should be real nice. I'll throw up some pics when it comes.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 18, 2011 05:56 PM
Mine looks very nice I will post pictures after it's on the bike!
|
1badzx12r
Needs a life
Posts: 8321
|
posted March 18, 2011 06:36 PM
 Edited By: 1badzx12r on 19 Mar 2011 02:38
quote:
. the bearings they do not come with are the ones for the lowering links which I will just use the ones out of my stock arm.
haha good luck .. on the 3 hole adjusters are they still putting a roll pin thru the chain adjustment bolts .. and the bottle brace is to far forward
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted March 19, 2011 02:32 AM
1bad I take it you think these arms are junk? I just went and looked and there is a small roll pin where yousaid, Do you see that causing an issue? Bottle Bracket seem to be in a fine location to me. Overall arm looks very nice to me and welds look very good as well. finish is also nice. it's chrome moloy so really don't see it breaking. Guess only time will tell.
|
|
|
HOME
NEW TOPIC