wrongway
Pro
Posts: 1078
|
posted February 10, 2011 07:27 PM
modified ram air system
I have changed my ways ... no more ugly air intake ... nore ugly naked bike
I am going back to the stock air horn and putting the plastics back on
Roy
  
|
dakota9498
Pro
Posts: 1181
|
posted February 10, 2011 07:29 PM
Good job tying it all in. I want to see how much you pick up in the mile with plastics on, that should be interesting.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
1badzx12r
Needs a life
Posts: 8321
|
posted February 10, 2011 07:32 PM
i see silicone
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
wrongway
Pro
Posts: 1078
|
posted February 10, 2011 07:35 PM
quote:
Good job tying it all in. I want to see how much you pick up in the mile with plastics on, that should be interesting.
thanks,,,
I am guessing 10 -15 mph with me on it since I really cant get behind the plastics.
I was really surprised when Ali only went 3 mph faster than I did at maxton, but I think he will have much better gains with the plastics since he can get behind them and make good use of the aero.... it will be an interesting test.
Roy
|
wrongway
Pro
Posts: 1078
|
posted February 10, 2011 07:37 PM
quote:
i see silicone
actually , that is winshield urethane.... that is some bad shit, I dont think it is ever coming off.
Roy
|
1badzx12r
Needs a life
Posts: 8321
|
posted February 10, 2011 07:51 PM
 Edited By: 1badzx12r on 11 Feb 2011 03:51
quote:
quote:
i see silicone
actually , that is winshield urethane.... that is some bad shit, I dont think it is ever coming off.
Roy
i bet a cheeseburger it breaks off .. i tried the decal glue which is the same stuff made by 3M ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
wrongway
Pro
Posts: 1078
|
posted February 10, 2011 07:55 PM
quote:
quote:
quote:
i see silicone
actually , that is winshield urethane.... that is some bad shit, I dont think it is ever coming off.
Roy
i bet a cheeseburger it breaks off .. i tried the decal glue which is the same stuff made by 3M ..
ok , you're on ,,, i will get my cheesburger at the end of the season.
Roy
|
1badzx12r
Needs a life
Posts: 8321
|
posted February 10, 2011 08:05 PM
i'll get mine 1st race you run ..hehe
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
Shane661
Needs a life
Posts: 11494
|
posted February 20, 2011 07:40 PM
Edited By: Shane661 on 21 Feb 2011 03:59
I like it...can't wait to see what it runs!
Nice work bending that pipe... 
|
Ratfink
Novice Class
Posts: 93
|
posted February 20, 2011 07:54 PM
looks interesting and the pipe does look like good work like stated above
|
Rich
Expert Class
Just havin' fun!!
Posts: 300
|
posted February 21, 2011 01:04 PM
The pipes look like it should be that way from the factory instead of all the bends and abrupt changes.
Gotta make room for the headlights.
____________
07 Green and Black, How fast is fast?
203 for now. Limited $$ = limited HP.
|
shiphteey
Needs a job
Posts: 2529
|
posted February 24, 2011 05:25 PM
quote:
quote:
Good job tying it all in. I want to see how much you pick up in the mile with plastics on, that should be interesting.
thanks,,,
I am guessing 10 -15 mph with me on it since I really cant get behind the plastics.
I was really surprised when Ali only went 3 mph faster than I did at maxton, but I think he will have much better gains with the plastics since he can get behind them and make good use of the aero.... it will be an interesting test.
Roy
I'm game.
A.
____________
Gemini Motorcycles
Topping out everything from Ninja 250s to nitrous ZX-14s.
|
Halvefast
Zone Head
Posts: 806
|
posted February 24, 2011 06:10 PM
Nice job Roy, got any pics of where the tubes go into the frame?
Did you use the stk hardware or are they much bigger? Thx
____________
Texas Mile 200.256mph - Oct. 2007 (Update 202.577mph Oct 2008) NOS assisted
ECTA Ohio Mile 195.132mph
TexasMile 2012 199.9 mph all motor!
Streetriders Shootout 2008 series Pro/ET Champ!
Streetriders Shootout 2007 Series Pro/ET Runner-up!
|
wrongway
Pro
Posts: 1078
|
posted February 24, 2011 06:41 PM
quote:
Nice job Roy, got any pics of where the tubes go into the frame?
Did you use the stk hardware or are they much bigger? Thx
tubes go into the stock location. just a little trimming was needed to make the frame openings round. I made flanges adn welded them to the tubes and bolt on in the stock location.
Roy
|
|
|
HOME
NEW TOPIC