880turbo
Novice Class
Posts: 34
|
posted February 04, 2011 08:21 AM
ZX14 throttle bodies.
Hello; Mike here. Is there any difference between the 06-07 throttle bodies and the 08 throttle bodies other than the fuel injector sizes? What are the fuel injector sizes? Thanks for the help. Mike.
  
|
Swiftkart
Expert Class
Posts: 349
|
posted February 04, 2011 09:17 AM
Throttle bodies all the same 06-11, 06-07 420cc 10 hole injectors, 08-11 330cc 12 hole injectors
____________
2006 ZX14, Brock CT-Meg, PC, ignition module, E85, 214 lbs suited, 8.96@152.32 1.46 60'
|
880turbo
Novice Class
Posts: 34
|
posted February 04, 2011 09:42 AM
ZX14 Throtle Bodies.
Thanks for the reply. That is very useful information. Thanks. Mike.
|
dakota9498
Pro
Posts: 1181
|
posted February 04, 2011 12:00 PM
The throttlebodies have different part numbers according to kaw
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted February 04, 2011 12:18 PM
I'm pretty sure the injector angle is different between 06,07 to 08+
|
RICH CRAFT 1
Zone Head
Posts: 681
|
posted February 04, 2011 12:48 PM
I think the 06-07 were 10° angle and the 08 and newer or 15° angle? but when I checked them I couldn't tell any difference?
Ken
____________
Red 06 ZX14 RR
|
Shane661
Needs a life
Posts: 11494
|
posted February 04, 2011 01:03 PM
I have had no problem using the '08 and up body with 06-07 injectors. Mapping was still spot on. We have a set of 08+ TB's bored to 47mm, and an 06-07 injector rail on an 06 bike.  :
|
dakota9498
Pro
Posts: 1181
|
posted February 04, 2011 02:59 PM
That is good to know, I have seen some pretty cheap sets and was worried they might be a little different.
____________
2008 ZX14
Never argue with a fool, onlookers may not be able to tell the difference. ~Mark Twain
|
01smokes
Needs a job
Posts: 2243
|
posted February 04, 2011 05:53 PM
i have some injectors if some one needs them they are out of a 06...
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
00Busa
Expert Class
Trying to go FASTER !
Posts: 270
|
posted February 04, 2011 07:45 PM
I have a set of complete t-bodies for sale from an '06 as well.
____________
'00 Busa / '06 14 /
IT AINT BRAGGING, IF YOU CAN BACK IT UP !
|
FIREBRAND74
Novice Class
Posts: 63
|
posted February 04, 2011 09:32 PM
how much????
|
oldkawboy
Needs a job
Posts: 2125
|
posted February 07, 2011 04:55 PM
I know the vaccum port tubes are a different diameter between the two models so they are not exactly the same.......splitting hairs but there is a difference.
Dan
|
punkynlew
Novice Class
Posts: 77
|
posted February 01, 2012 03:02 PM
'06 throttle bodies still for sale?
quote:
I have a set of complete t-bodies for sale from an '06 as well.
Do you still have the '06 throttle bodies for sale? If so, how much? Do you also have the '06 injectors for sale? Lew
____________
Lew
'08 C14 Turbo
Lehigh Acres, FL
|
|
|
HOME
NEW TOPIC