GREYHOUNDMOSES
Expert Class
Posts: 324
|
posted January 27, 2011 02:45 PM
Dynatech shiftminder.
quote:
--------------------------------------------------------------------------------
Coil wires at ECU
#1 white/red stripe
#2 white/blue stripe
#3 white/green stripe
#4 white/yellow stripe
--------------------------------------------------------------------------------
Are these the wires I need to pick up a tach signal to trigger a shiftminder?
--------------------------------------------------------------------------------
Yes, #1 or #4 is the normal wire used for a tach signal.
--------------------------------------------------------------------------------
Thanks for the reply AcadianaZX
I've been given a sm4 shift minder which everyone tells me won't trigger correctly
on the 14 but it's not going to stop me trying! I'm going to try combinations of 1,2 and 4 coil wires
(with resistors) and see what happens.
If nothing else, I can check i'm getting some kind of signal before BUYING! the sm2h that
Dynatech say is the correct unit.
  
|
BrucerZX14
Expert Class
Posts: 373
|
posted January 27, 2011 08:36 PM
The ZX14 has a wasted spark ignition system. This requires the DSM2-H. If you need one, I have one that is in perfect working order. I installed a Raptor launch/shift light on my ZX14 so I don't need the shiftminder any more. Let em know if you're interested.
|
CajunBoyz
Zone Head
Posts: 702
|
posted January 28, 2011 04:21 AM
quote:
The ZX14 has a wasted spark ignition system. This requires the DSM2-H. If you need one, I have one that is in perfect working order. I installed a Raptor launch/shift light on my ZX14 so I don't need the shiftminder any more. Let em know if you're interested.
How much?
____________
"Cajun Boyz with Bad Ass Toys"
|
BrucerZX14
Expert Class
Posts: 373
|
posted January 28, 2011 06:12 AM
Dyna Shift Minder and Shift Light
quote:
quote:
The ZX14 has a wasted spark ignition system. This requires the DSM2-H. If you need one, I have one that is in perfect working order. I installed a Raptor launch/shift light on my ZX14 so I don't need the shiftminder any more. Let em know if you're interested.
How much?
I'm asking $100 shipped. It has the light also. Complete set up.
|
GREYHOUNDMOSES
Expert Class
Posts: 324
|
posted January 28, 2011 10:38 AM
I take it you swapped to the Raptor for the launch feature, not because of any problems with the Dynatech?
All the searches I've done show people having problems (usualy through buying/ being sold the wrong unit), but since I was given the sm4 for free, I thought I'd give it a go!
Thanks for the offer, but I already have the shiftlight so if you get a firm offer, take it.
If I have no joy when I try it in the morning (I'm not really expecting to!), I'll get back to you.
|
BrucerZX14
Expert Class
Posts: 373
|
posted January 28, 2011 08:35 PM
quote:
I take it you swapped to the Raptor for the launch feature, not because of any problems with the Dynatech?
All the searches I've done show people having problems (usualy through buying/ being sold the wrong unit), but since I was given the sm4 for free, I thought I'd give it a go!
Thanks for the offer, but I already have the shiftlight so if you get a firm offer, take it.
If I have no joy when I try it in the morning (I'm not really expecting to!), I'll get back to you.
Your're correct. The swap was just for the launch feature. It's here if you want it. This one will work with our ignition systems.
|
-BICEP-
Novice Class
Posts: 52
|
posted January 28, 2011 08:43 PM
quote:
quote:
quote:
The ZX14 has a wasted spark ignition system. This requires the DSM2-H. If you need one, I have one that is in perfect working order. I installed a Raptor launch/shift light on my ZX14 so I don't need the shiftminder any more. Let em know if you're interested.
How much?
I'm asking $100 shipped. It has the light also. Complete set up.
Is it a 100% complete unit...instructions and everything? Would you take $80 shipped to 14304 Niagara Falls NY?
Rick
____________
Day by day!
|
BrucerZX14
Expert Class
Posts: 373
|
posted January 29, 2011 06:22 AM
quote:
quote:
quote:
quote:
The ZX14 has a wasted spark ignition system. This requires the DSM2-H. If you need one, I have one that is in perfect working order. I installed a Raptor launch/shift light on my ZX14 so I don't need the shiftminder any more. Let em know if you're interested.
How much?
I'm asking $100 shipped. It has the light also. Complete set up.
Is it a 100% complete unit...instructions and everything? Would you take $80 shipped to 14304 Niagara Falls NY?
Rick
It's complete with instructions. I'll meet you half way. $90 shipped.
|
GREYHOUNDMOSES
Expert Class
Posts: 324
|
posted January 29, 2011 07:36 AM
Brucer. PM sent!
|
-BICEP-
Novice Class
Posts: 52
|
posted January 29, 2011 08:09 AM
quote:
quote:
quote:
quote:
quote:
The ZX14 has a wasted spark ignition system. This requires the DSM2-H. If you need one, I have one that is in perfect working order. I installed a Raptor launch/shift light on my ZX14 so I don't need the shiftminder any more. Let em know if you're interested.
How much?
I'm asking $100 shipped. It has the light also. Complete set up.
Is it a 100% complete unit...instructions and everything? Would you take $80 shipped to 14304 Niagara Falls NY?
Rick
It's complete with instructions. I'll meet you half way. $90 shipped.
DONE! You got Paypal? I'll pay you right away!
BICEP
____________
Day by day!
|
GREYHOUNDMOSES
Expert Class
Posts: 324
|
posted January 30, 2011 10:14 AM
Coil wires at ECU
#1 white/red stripe
#2 white/blue stripe
#3 white/green stripe
#4 white/yellow stripe
--------------------------------------------------------------------------------
Are these the wires I need to pick up a tach signal to trigger a shiftminder?
--------------------------------------------------------------------------------
Yes, #1 or #4 is the normal wire used for a tach signal.
--------------------------------------------------------------------------------
I've tapped into the white/ red stripe at the ECU (lower left multiplug) but
I'm +13v with the ignition on. I need the -ve side of #1 coil for the tach signal.
Any Ideas?
|
BrucerZX14
Expert Class
Posts: 373
|
posted January 30, 2011 07:02 PM
quote:
quote:
quote:
quote:
quote:
quote:
The ZX14 has a wasted spark ignition system. This requires the DSM2-H. If you need one, I have one that is in perfect working order. I installed a Raptor launch/shift light on my ZX14 so I don't need the shiftminder any more. Let em know if you're interested.
How much?
I'm asking $100 shipped. It has the light also. Complete set up.
Is it a 100% complete unit...instructions and everything? Would you take $80 shipped to 14304 Niagara Falls NY?
Rick
It's complete with instructions. I'll meet you half way. $90 shipped.
DONE! You got Paypal? I'll pay you right away!
BICEP
Paypal works for me. Email me. I guess I don't have enough posts to be allowed to receive and send PMs. bsiburt@suddenlinkdotnet
|
|
|
HOME
NEW TOPIC