HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Chassis setup. Please chim in NEW TOPIC NEW POLL POST REPLY
kawasakijockey


Pro
Posts: 1876
posted December 19, 2010 08:05 PM        
I'm not quite as heavy as you Serius but this video shows what my suspension does. The vid looks like it squats more than 2.5 inches but that is all it really does.

____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost

  Ignore this member   
serius blk


Zone Head
Posts: 543
posted December 19, 2010 08:06 PM        
i may have to call him. and kaw jockey that sounds like what is happening because its doing both of those wheelie or spin. U know how some bikes are kinda soft when u push down on them. Was mine goes down the inital inch. It wont move any further. i can bounce on it and it doesnt go down any further. Maybe its a combination of both the coil and shock.
  Ignore this member   
serius blk


Zone Head
Posts: 543
posted December 19, 2010 08:07 PM        
is the track open close to beaumont
  Ignore this member   
kawasakijockey


Pro
Posts: 1876
posted December 19, 2010 08:08 PM        
Not until March.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost

  Ignore this member   
kawasakijockey


Pro
Posts: 1876
posted December 19, 2010 08:10 PM        
quote:
i may have to call him. and kaw jockey that sounds like what is happening because its doing both of those wheelie or spin. U know how some bikes are kinda soft when u push down on them. Was mine goes down the inital inch. It wont move any further. i can bounce on it and it doesnt go down any further. Maybe its a combination of both the coil and shock.
I can tell you that mine wont move more than an inch either but it squats quick with 180hp to it.lol
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost

  Ignore this member   
serius blk


Zone Head
Posts: 543
posted December 19, 2010 08:13 PM        
i will say my bike raised up about a inch after i tighten the coil.
  Ignore this member   
serius blk


Zone Head
Posts: 543
posted December 19, 2010 08:14 PM        
But fellas i really do appreciate all the advice. That at least points me in the right direction.
  Ignore this member   
kawasakijockey


Pro
Posts: 1876
posted December 19, 2010 08:18 PM        
Pine Valley in Diboll is supposed to have a tnt day on New Year's day. I am not sure I can make that one but if I go you can come up and we can watch what is going on and maybe help out.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost

  Ignore this member   
serius blk


Zone Head
Posts: 543
posted December 19, 2010 08:27 PM        
i will see about that. But the way things are looking mlk will be the next time.
  Ignore this member   
LeonidasZX14


Pro
Posts: 1277
posted December 20, 2010 04:29 AM        
I'm 135 pounds in my bikes watch 3 and a half inches. I have a Litz shock and it is very stiff. The bike needs to squat however like Lee said if it rebounds to fast it unloads the tire. The whole idea behind the shock is to squat less than the OE shock and rebound much slower. My shock takes literally like 2-3 seconds to come back to the top when I push my tail down by hand...good luck man!!!
____________
09' ZX14

  Ignore this member   
Lucky14


Pro
Posts: 1439
posted December 20, 2010 09:18 AM        
quote:
there is a video on here. the one lucky did when u came to houston. Mine is the green 14


This one?






____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.

  Ignore this member   
smokinZX14


Needs a life
Posts: 10197
posted December 20, 2010 10:48 AM        
quote:
quote:
there is a video on here. the one lucky did when u came to houston. Mine is the green 14


This one?






Best i can see is not coming down much in the rear , looks stiff to me .. One other thing i see is you upsetting the bike by putting your feet on the pegs to fast .. Do you have and air shifter ? If you do wait till second gear before you pull your feet up .. If you don't have an air shifter get one ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95

  Ignore this member   
serius blk


Zone Head
Posts: 543
posted December 20, 2010 11:20 AM        
yes i have a electric shifter. Yes i will keep that in mind to keep my feet down till second. Ur correct it doesnt squat much. Mine takes about 1 second to come up. Thats not a full squat cause i cant push it down to make it squat by hand.
  Ignore this member   
serius blk


Zone Head
Posts: 543
posted December 20, 2010 11:24 AM        
quote:
quote:
quote:
there is a video on here. the one lucky did when u came to houston. Mine is the green 14


This one?






Best i can see is not coming down much in the rear , looks stiff to me .. One other thing i see is you upsetting the bike by putting your feet on the pegs to fast .. Do you have and air shifter ? If you do wait till second gear before you pull your feet up .. If you don't have an air shifter get one ...


thanks lucky thats the one

  Ignore this member   
eklipse636


Needs a life
ZX-14
Posts: 6046
posted December 20, 2010 11:39 AM        
I have the shock from lonnie. It's not a bad product but I don't think he has ANY idea how to set them up. I wasn't going to say anything but since this has came out, don't trust his settings. He sent me my shock with all the adjustments turned all the way out, not enough nitrogen, and the spring all the way loose. You need to find someone locally that knows how to adjust them. BMC isn't the one to talk to about that.

As far as you having too much spring, I don't think you do. I'm 215 suited and I have the stock spring tightened all the way down and it's not enough. I sold my Racetech spring before I knew this.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32

  Ignore this member   
serius blk


Zone Head
Posts: 543
posted December 20, 2010 03:36 PM        
thanks for saying something eklipse. I have the heavy race tech coil on mine. I have not cked his settings. I know one thing. The back of the bike wont compress down. I will ck the damping to see if thats why it wont compress.
  Ignore this member   
eklipse636


Needs a life
ZX-14
Posts: 6046
posted December 20, 2010 04:41 PM        
I go to work in the dark, and get home in the dark, but maybe this weekend I can see where I got mine set to help get you a little closer.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32

  Ignore this member   
gilberjj


Needs a job
Friend of Fast
Posts: 3196
posted December 21, 2010 12:26 PM        
Kawasakijockey, how long is your bike, and how long is the swingarm?
  Ignore this member   
kawasakijockey


Pro
Posts: 1876
posted December 21, 2010 03:09 PM        
68in wb at 10 in over.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost

  Ignore this member   
All times are America/Va [ This thread is 2 pages long: 1  2   ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Chassis setup. Please chim in NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.26476907730103 seconds processing time