Cutback
Expert Class
Posts: 183
|
posted November 03, 2010 01:36 PM
Need a measurement
Could one of you guys help me out and get me a measurement from the inside of your swingarm to the face of your sprocket? It should be around .750-.850 (3/4"-7/8") Thanks.
____________
old enough to know better!
  
|
Hellmutt
Needs a job
Posts: 2013
|
posted November 03, 2010 02:44 PM
Mines just between .8125 and .84375 - got a problem with yours? If you're thinking your spacers are switched i dont think it matters, arent they identical?
____________
British flying couch with endtables and an orange thumper
________________________________________________
|
Cutback
Expert Class
Posts: 183
|
posted November 03, 2010 03:53 PM
Thanks Helmut. I did the ZX10/14 wheel conversion but, the spacers are incorrect. I've put the kit on two different '06/'07 ZX10 wheels and no go. The right side spacer on both wheels is .100 too big which also makes the spacers for the rear brake caliper .100 over.
____________
old enough to know better!
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted November 03, 2010 04:12 PM
Who did you buy the conversion from?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Cutback
Expert Class
Posts: 183
|
posted November 03, 2010 07:31 PM
As far as I know, there is only one vendor.
____________
old enough to know better!
|
Hellmutt
Needs a job
Posts: 2013
|
posted November 04, 2010 03:06 AM
Yeah, I'm not sure about the conversion and the spacers needed for it.........is the ZX10 wheel hub narrower than the ZX14 wheel or something?
____________
British flying couch with endtables and an orange thumper
________________________________________________
|
osr
Expert Class
Posts: 459
|
posted November 04, 2010 05:48 AM
I believe we talked for a while on all the measurements onthe spacers. Everything was right on -- did you change the sprocket carrier? This is the first problem that we have had in about 20 sets-- I will pull my wheel off later and see if i can find any part number or casting marks int he carrier to see if yours matches mine.
|
Cutback
Expert Class
Posts: 183
|
posted November 04, 2010 07:21 AM
Yep, we talked a couple times, to great length. I appreciate all of your insight and help along the way but, after installing on (2) different 06/07 wheels and carriers, both ended up .100 fat on the right side. The left side and internal spacers were spot on. As I mentioned before, I thought I was screwing up some where but, after (2) installs it is just the spacers are fat on the right side. PIA, as the bike has been down too long as I went threw this process.
____________
old enough to know better!
|
osr
Expert Class
Posts: 459
|
posted November 04, 2010 11:09 AM
i pulled my carrier off but no part number? like i said this is the first one we have had this prob with. all ur measurements were right with our drawings and parts on the shelf????
|
BLK ICE
Pro
we'll leave the light on for u
Posts: 1709
|
posted November 04, 2010 02:13 PM
 Edited By: BLK ICE on 4 Nov 2010 22:14
quote:
Yep, we talked a couple times, to great length. I appreciate all of your insight and help along the way but, after installing on (2) different 06/07 wheels and carriers, both ended up .100 fat on the right side. The left side and internal spacers were spot on. As I mentioned before, I thought I was screwing up some where but, after (2) installs it is just the spacers are fat on the right side. PIA, as the bike has been down too long as I went threw this process.
Cutback,
Do you want to sale the wheels and kit? If so, please P.M. a price to me. If not, cool. I would have P.M.'ed you but I don't think you have enough post to receive it.
BLK ICE
____________
Fastest Stock Motor, Stock Bodywork, Hand Clutch, N/A Super Heavy Hitter on the Planet!
Fastest Stock Motor, Stock Bodywork, Hand Clutch, Nitrous Super Heavy Hitter on the Planet!
Bikeland 1/8 mile 5 sec.N/A Stock Motor Club Member.
Repersenting: BLACK ICE PERFORMANCE and NO QUARTER MOTORSPORTS
Nitrous and Tires Sponsored by: Custom Specialties Cycles
Dyno Tuned by: Garron of ADAMS PERFORMANCE. http://www.adamsperformance.net/
BlackIce Performance: Honor, Freedom, Love of Country!
(I am open to Sponsorship and Product Testing and Review. Contact BlackIce Performance at blackice_performance@yahoo.com) or BlackIce Perf on Facebook
|
Cutback
Expert Class
Posts: 183
|
posted November 05, 2010 04:59 AM
BLK ICE,
Not for sale. I sold my 14 wheels 2 weeks ago so I'm committed. There's always inherent risk involved when modifying one application to another and I'm well aware of it. It's hard to believe that Dr. frustration jumps up to bite me on the ass, as the only time this mod doesn't work easily. I'm almost done.
____________
old enough to know better!
|
68gts2
Zone Head
hobbies ( Beating you !!! )
Posts: 927
|
posted November 05, 2010 08:51 AM
Persistence.
____________
Chromed-out,in the dirt 08SE with all the good stuff!!!
|
Hellmutt
Needs a job
Posts: 2013
|
posted November 06, 2010 07:58 AM
Yup, keep your head wrapped around it and you'll have 'er rollin' in no time
____________
British flying couch with endtables and an orange thumper
________________________________________________
|
|
|
HOME
NEW TOPIC