Nelson Taylor
Zone Head
Posts: 927
|
posted April 14, 2010 07:31 AM
9.37@151
Well I finally have started my season for 2010. And for the first time out things weren't too bad. I need to work on being consistent off the line again, And for now I'm about 10lbs heavier this year...
I made about 5 passes last night. And 9.37 @ 151mph was the best. I was looking to go atleast some low 30's. As 9.27 was my best last year... Running 87 pump gas, The clutch has been in my bike for its 3rd year now. Bike still pulls hard I almost went 153 on one pass... Rode the bike to the track and back home afterwards....
Thankyou Brock for supplying me with some maps to try. He was emailing me over the weekend while he was in Commerce, GA..... I appreciate the support to get me going faster....
I am going to try the 40tooth next to get me out the gate smoother, hopefully that will get me in the mid to low 20's on pump gas..... Then once I'm consistent I will add MR9... for shits and grins...
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
   
|
ambull
Expert Class
Posts: 108
|
posted April 14, 2010 08:18 AM
Good job Nelson first time out..151 sound's good..What kind of 60 an 330 did you have?Hurry and get down to Benton!
|
Quarter Pounder
Pro
with Cheese
Posts: 1069
|
posted April 14, 2010 08:34 AM
ahhh...feels good to twist that throttle again eh? Nice job on your times...they will come down as you get more seat time.
Don't sweat it when that 40 tooth screws everything up for you for awhile. It takes some getting used to. But you'll figure it out.
____________
SWB 2008 ZX-14
9.19 @ 151
5.98 @ 123
1.53 60'
|
Nelson Taylor
Zone Head
Posts: 927
|
posted April 14, 2010 10:03 AM
The 60 was only 1.58 and 330 was 4.09...
I know I can go quicker just need some consistency... Hoot I will be in Benton soon..
QP, Yes it felt great just to be on the track again...I am excited about running a bit quicker this year and being more consistent with the numbers....
____________
Best #'s
1.54
4.03
6.02 @ 121mph
(Stock Wheelbase) 2006 ZX14
|
kaw-rick
Pro
Posts: 1167
|
posted April 14, 2010 11:27 AM
Good job nelson.
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted April 14, 2010 03:55 PM
Good job Nelson! Now I have something to shoot for this weekend!
|
Lucky14
Pro
Posts: 1439
|
posted April 14, 2010 03:57 PM
EXCELLENT!! 
____________
You only need two tools: WD-40 and Duct Tape.
If it doesn't move and should, use the WD-40.
If it shouldn't move and does, use the duct tape.
|
smokinZX14
Needs a life
Posts: 10197
|
posted April 14, 2010 06:52 PM
Good job Nelson!
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
|
|
HOME
NEW TOPIC