1badzx12r
Needs a life
Posts: 8321
|
posted March 28, 2010 01:33 PM
 Edited By: 1badzx12r on 28 Mar 2010 21:33
zx14 oem bearings in a busa package
280+ HP Hayabusa Big Stroker
Pro Stock Power on the Street!
Our customers continually demand bigger, bigger, bigger...
We have been building stroker Busa motors for years but never before
have we been so excited about it.
We combined our 240 kit with a billet stoker crank with titanium rods for a
dependable 1630 cc displacement. Our palms were sweaty as we rolled it over to the dyno.
The results were stunning!
As of January 1, 2010, 17 of these engines have been built and raced without one bearing failure.
After some development on the fuel curve we came up with over 280 horsepower.
By our calculations, 280 horsepower on a chassis dyno with a street tire equates to
320 hp at the crank - Now we are talking Pro Stock Power!
Package includes everything in the 240 package plus:
Billet 9mm Stroker crank
Titanium Rods
ZX-14 Bearings
Price complete $11,900
Turn-key: Drive-in, drive-out
Stroker Crank, Rods and Bearings installed stand-alone: $7000
This package REQUIRES a modified clutch assembly and modified fuel system.
Both are NECESSARY and ADDITIONAL!
Price based on customer specifications - call us for more information
--------------------------------------------------------------------------------
i just love them oem zx14 bearings
____________
http://www.youtube.com/watch?v=S06nIz4scvI
  
|
1badzx12r
Needs a life
Posts: 8321
|
posted March 28, 2010 01:35 PM
As of January 1, 2010, 17 of these engines have been built and raced without one bearing failure.
just have to make sure you guys seen that part twice
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
1badzx12r
Needs a life
Posts: 8321
|
posted March 28, 2010 01:36 PM
http://www.carpenterracing.com/sbp_busa0810.htm
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted March 28, 2010 01:57 PM
Only 12 grand?! He'll I might have to buy a couple of them!
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
LeonidasZX14
Pro
Posts: 1277
|
posted March 28, 2010 01:59 PM
Thats what I was thinking. A damn 7lb boost zx14 makes that for 6k........hmmmmmm?
____________
09' ZX14
|
1badzx12r
Needs a life
Posts: 8321
|
posted March 28, 2010 02:02 PM
Edited By: 1badzx12r on 28 Mar 2010 22:03
quote:
A damn 7lb boost zx14 makes that for 6k........hmmmmmm?
3k used LOL
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
LeonidasZX14
Pro
Posts: 1277
|
posted March 28, 2010 02:06 PM
I can't believe that you still have'nt sold that thing yet. I hope you do man and hopefully they guy that buys it does'nt have MTC pistons. 
____________
09' ZX14
|
1badzx12r
Needs a life
Posts: 8321
|
posted March 28, 2010 02:13 PM
Edited By: 1badzx12r on 28 Mar 2010 23:58
i'll make sure to tell him ..no MTC noz drop-in pistons with this turbo .. because noz pistons warp and distort in a turbo bike ... thats what MTC told me .. i can't make anything up better than that reason ..
i'm not pushing the sell looking at purchase of a gt34 turbo .. going low boost high volume system
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
|
|
HOME
NEW TOPIC