SixSixoh6
Zone Head
Posts: 660
|
posted March 10, 2010 09:53 PM
Whoooo, you'd sh*t a brick if you seen how off my stuff is from adding all the stuff I did over the winter...just a part of going so fast, nothing fits right after walkin over busa's all day :-)
____________
2006 ZX-14: Murdered out, in the dirt, extended, sprayed, air shifted, geared--GONE
2009 ZX-14 SE--has two wheels and an engine
  
|
blackmamba
Expert Class
Posts: 146
|
posted March 11, 2010 07:06 AM
quote:
mamba are you racing 2 wheelspeed this year and if so what classes?
not sure yet. gotta get some wheel time before I decide. are you doing it? if so what class?
Abe
____________
www.packleader.org
|
blackmamba
Expert Class
Posts: 146
|
posted March 11, 2010 07:07 AM
quote:
Whoooo, you'd sh*t a brick if you seen how off my stuff is from adding all the stuff I did over the winter...just a part of going so fast, nothing fits right after walkin over busa's all day :-)
LOL!
____________
www.packleader.org
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted March 11, 2010 09:18 PM
quote:
Whoooo, you'd sh*t a brick if you seen how off my stuff is from adding all the stuff I did over the winter...just a part of going so fast, nothing fits right after walkin over busa's all day :-)
____________
'06 Passion Red ZX-14
*Lee*
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted March 12, 2010 09:22 AM
keep playing with that front piece it will fit right once you get it all lined up
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
blackmamba
Expert Class
Posts: 146
|
posted March 12, 2010 09:35 AM
quote:
keep playing with that front piece it will fit right once you get it all lined up
Fuck man! IDK!!!! I did everything...fucked with the tabs...any other ideas? such a pain in the ass to deal with cause my bike has a steering stabilizer and everytime I wanna mess with it, I gotta take that off! LOL!
Thanks,
Abe
____________
www.packleader.org
|
SixSixoh6
Zone Head
Posts: 660
|
posted March 12, 2010 09:58 AM
now that you mention it, i think i had a bit of an issue getting mine to line back up as well...just have to give it some positive encouragement :-) meaning i just had to push and pull it back to get it into place.
____________
2006 ZX-14: Murdered out, in the dirt, extended, sprayed, air shifted, geared--GONE
2009 ZX-14 SE--has two wheels and an engine
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted March 12, 2010 01:29 PM
You can always do what this guy did to solve his fairings not lining up problem:
____________
'06 Passion Red ZX-14
*Lee*
|
blackmamba
Expert Class
Posts: 146
|
posted March 12, 2010 02:03 PM
No way Jose.
____________
www.packleader.org
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted March 12, 2010 02:06 PM
I knew you'd say that ! 
____________
'06 Passion Red ZX-14
*Lee*
|
blackmamba
Expert Class
Posts: 146
|
posted March 12, 2010 04:21 PM
I give up! Post pics people! I don't believe it can be tight on both sides! I have tried everything!
____________
www.packleader.org
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted March 13, 2010 12:37 PM
are the push tabs on both sides fully engaged on the bottom of the piece? you kind of have to reach under to hold it from the back while pushing on the outside to get them all the way in. the plastic just bends if you only push from the outside. just a thought, mine used to give me hell but now i got it...
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
blackmamba
Expert Class
Posts: 146
|
posted March 13, 2010 03:11 PM
yes they are...it seems like the upper push tab on the one side does not want to go in all the way....it will when I take it all off but once I start pushing things together on both sides it all goes to hell rather quickly...something is just not quite right on the left side and there is nothing visually I can see that is cause it. I have had it on and off 6-7 times now and it's better but not by much. Any other thoughts?
Abe
____________
www.packleader.org
|
TooHype
Expert Class
Go Hard or Go Home !!
Posts: 427
|
posted March 13, 2010 03:21 PM
 Edited By: TooHype on 13 Mar 2010 23:22
 I said this jokingly once but seriously you may have to ..."Fill it with body putty & repaint!"
____________
Go Hard or Go Home !!....2007 Diablo Black ZX-14, BMC Race Filter, Brock's Alien Head, Brock's Radial Mount Strap, PClll with Custom Map, Flies removed, Muzzy fan, Muzzy lowering links, Muzzy Fender Eliminator, 16/41, Speedohealer, Stretched 6", Lowered 3" IN GOD I TRUST !......If You’re a Hater….KILLYASELF !!
|
blackmamba
Expert Class
Posts: 146
|
posted March 13, 2010 04:10 PM
Edited By: blackmamba on 14 Mar 2010 00:16
FIGURED IT OUT!
The upper push tab on the right side does not seem to seat all the way. I suspect the rubber is a little worn and not as tight as it used to be...kinda like a women who has given birth or had sex with ray j....LOL
Does anyone have a part number on that piece?
Also my wellnut that holds the inner side panels on next to the speedometer seems to have gone by by.
Does anyone have a part number on that?
ahhhhhh.....the journey continues for fairing perfection.
____________
www.packleader.org
|
blackmamba
Expert Class
Posts: 146
|
posted March 13, 2010 04:26 PM
Edited By: blackmamba on 14 Mar 2010 00:34
ok....found the part numbers
92160 is that correct....push tab on tank....
92015 for upper wellnut for inner side cover...is that correct?
____________
www.packleader.org
|
SLVR_BLT
Zone Head
Chicken Strips!
Posts: 589
|
posted March 14, 2010 12:00 AM
quote:
keep playing with that front piece it will fit right once you get it all lined up
When i was at the dealer it appears to be a factory fit issue as all the Kawi's 14s i saw in their stock had the same gap issue. i think out of 12 ZX14s in there i saw 2 that was close to perfect. Mine is the same way, the right side one has a bigger gap then the left. I can actually see the tabs from the gap. Some parts of this bike has a really crappy fit n finish.
____________
2006 Kawasaki ZX14, Muzzy Full Titanium Exhaust w/ Carbon Can, PCIII, BMC Street Filter
|
SixSixoh6
Zone Head
Posts: 660
|
posted March 14, 2010 06:59 AM
now youre going to make me look at mine when i see my bike next. dont really notice a gap with the black bike :-)
____________
2006 ZX-14: Murdered out, in the dirt, extended, sprayed, air shifted, geared--GONE
2009 ZX-14 SE--has two wheels and an engine
|
blackmamba
Expert Class
Posts: 146
|
posted March 14, 2010 08:05 AM
I got mine very close...but I think after reading they above it's time to call it quits...lol.
____________
www.packleader.org
|
zixxer14
Pro
Damn that was Quick
Posts: 1233
|
posted March 14, 2010 08:18 PM
Look for well nuts at http://www.desmoparts.com/ they're cheaper than Kawi.
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted March 14, 2010 11:31 PM
Have you activated the flux capicitor
yet? Usually the forces imposed on the 14 while bending space & time keep all the plastics tight 
____________
'06 Passion Red ZX-14
*Lee*
|
blackmamba
Expert Class
Posts: 146
|
posted March 15, 2010 09:29 AM
quote:
Have you activated the flux capicitor
yet? Usually the forces imposed on the 14 while bending space & time keep all the plastics tight
Hopefully this afternoon I will set those fairings straight with a good ol fashioned 186mph wind gust.
____________
www.packleader.org
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted March 15, 2010 09:39 AM
way to stick with it, i get my wellnuts from desmoparts also
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
TooHype
Expert Class
Go Hard or Go Home !!
Posts: 427
|
posted March 15, 2010 03:19 PM
quote:
Hopefully this afternoon I will set those fairings straight with a good ol fashioned 186mph wind gust.
And if that dont work........."Fill it with body putty & repaint!"
____________
Go Hard or Go Home !!....2007 Diablo Black ZX-14, BMC Race Filter, Brock's Alien Head, Brock's Radial Mount Strap, PClll with Custom Map, Flies removed, Muzzy fan, Muzzy lowering links, Muzzy Fender Eliminator, 16/41, Speedohealer, Stretched 6", Lowered 3" IN GOD I TRUST !......If You’re a Hater….KILLYASELF !!
|
INTIMIDA2OR
Needs a life
RED rider!
Posts: 13081
|
posted March 15, 2010 04:00 PM
quote:
quote:
Hopefully this afternoon I will set those fairings straight with a good ol fashioned 186mph wind gust.
And if that dont work........."Fill it with body putty & repaint!"
that just gets funnier every time lol!
That's the same solution to plumbers crack. Pull those jeans up or spackle it shut
____________
'06 Passion Red ZX-14
*Lee*
|
|
|
HOME
NEW TOPIC