Douglas Home
Zone Head
Posts: 710
|
posted February 04, 2010 09:45 PM
dynatek shiftminder
I have been advised to use a dsm-4h model with a two coil tach adaptor.
I soldered onto coil 1 and 4 striped wires ,then tried coil 2 and three.
It does the startup test flash but wont trigger.
At first I was sold a dsm-4 that did the same, then was told to use this type.
Can someone please tell me if I maybe need the dsm-2h ?
To wet in tthe tropics to race since December but bloody frustrated!!!!
____________
Doug Mackay Australia
  
|
CajunBoyz
Zone Head
Posts: 702
|
posted February 05, 2010 04:47 AM
I also don't know, As On different occassions, Dynatek has told me the DSM4h & then on other occassion they told me the DSM2h ??? sooo they don't know..Would like to hear from someone whom has actually used which one on there 14 & got it working properly.
____________
"Cajun Boyz with Bad Ass Toys"
|
Douglas Home
Zone Head
Posts: 710
|
posted February 05, 2010 04:22 PM
Heeeeeeeelp..............drowning , can someone save me from this insanity?
Bump , bump , bump , bump!!!
____________
Doug Mackay Australia
|
Douglas Home
Zone Head
Posts: 710
|
posted February 05, 2010 09:46 PM
OK , "god bless America" .......USA USA USA .... Budweiser ...gridiron...baseball....hooters
now will someone help this desparate man?
____________
Doug Mackay Australia
|
BIG BLUE_ZX14
Expert Class
Posts: 374
|
posted February 05, 2010 10:19 PM
I wish I could help...I think everyone is too busy answering the "Flies and HP" question again. Try asking about your dynatek on zxforums...click below before big brother turns it off.
http://www.zxforums.com/forums/zx-14-forum/
____________
2012 Blue on Black ZX14R with Go Faster Stuff...
2007 Blue ZX14 Gone...
|
Douglas Home
Zone Head
Posts: 710
|
posted February 06, 2010 01:49 PM
I've put this question on three forums ,googled till I went cross eyed and Dynatek hasnt yet returned my email!!!!! Do I have to buy a bloody Busa ???
Doug.
____________
Doug Mackay Australia
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted February 06, 2010 04:39 PM
ok, bud and hooters got me. pretty sure you need the DSM-2H base rpm 8000
do us a favor and be sure you are on the neg wires of the coils. connect a test light to a wire and make sure its not powered. if its connected to pos it will not get the pulse/signal from when the coil is fired, and it will not be able to see the bikes rpm
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
|
|
HOME
NEW TOPIC