Quarter Pounder
Pro
with Cheese
Posts: 1069
|
posted December 22, 2009 06:56 AM
quote:
what was his 1\8 th mile time
5.99 1/8th
I think I can get my short times down a bit more with a revalved shock. I have a couple more things to try before I send it off. It's stock right now.
To correct Lee's earlier post, it does have a PCIII, but I could not tell you what map is in it, I have not tuned it at all. I'm still learning to ride it. I want to do a few more things to the set up and bottom out my times before I stretch/regear it. I'm looking for low 1.5s 60s maybe even high 1.4s with a great set up. I know I can do it, just a matter of getting that power down with a bit more chassis set up and tuning.
Had a blast getting in some seat time and making some passes with a friend. Thanks for meeting up kawasakijockey.
____________
SWB 2008 ZX-14
9.19 @ 151
5.98 @ 123
1.53 60'
  
|
kawasakijockey
Pro
Posts: 1876
|
posted December 22, 2009 07:40 AM
quote:
Had a blast getting in some seat time and making some passes with a friend. Thanks for meeting up kawasakijockey.
It was fun Jon. About time we got together at a track. Maybe next month we can go there again since I got the new tires put on yesterday. A shock job is next for me too when I can find $300 laying around.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
SteddyTeddy
Pro
Posts: 1664
|
posted December 22, 2009 07:47 AM
Ah those times were ok. 
|
Quarter Pounder
Pro
with Cheese
Posts: 1069
|
posted December 22, 2009 08:19 AM
quote:
Ah those times were ok.
don't make me come down there and kick yer LWB tail.  I'll wave as I go by. lol
____________
SWB 2008 ZX-14
9.19 @ 151
5.98 @ 123
1.53 60'
|
SteddyTeddy
Pro
Posts: 1664
|
posted December 22, 2009 09:03 AM
I'll just  
|
Quarter Pounder
Pro
with Cheese
Posts: 1069
|
posted December 22, 2009 02:20 PM
quote:
I'll just
I thought bottles were for babies? 
____________
SWB 2008 ZX-14
9.19 @ 151
5.98 @ 123
1.53 60'
|
madkawboy
Expert Class
Posts: 398
|
posted December 22, 2009 02:28 PM
How much of an improvment do you think that a revalve shock will make ? Mine is still stock and this idea has crossed my mind but i have never had a shock revalved.
____________
2007 ZX-14
Stock Wheel Base, footshifting, pump gas
5.94 @ 128 mph
1.50 60ft
|
Quarter Pounder
Pro
with Cheese
Posts: 1069
|
posted December 22, 2009 02:38 PM
quote:
How much of an improvment do you think that a revalve shock will make ? Mine is still stock and this idea has crossed my mind but i have never had a shock revalved.
For me, not a lot, but then again I am getting down to the nitty gritty and last few thousanths. At this point, it's not going to be big losses, just a little here, a little there, but the sum of all the tweaks equals up to a nice improvement.
The shock will just help you put the power down in a controlled manner. Having all the power in the world is no good unless you can make use of it (which is what I am trying to do).
____________
SWB 2008 ZX-14
9.19 @ 151
5.98 @ 123
1.53 60'
|
1badzx12r
Needs a life
Posts: 8321
|
posted December 22, 2009 04:18 PM
quote:
That's gettin' it done big time at SWB. Congrats!
quote:
quote:
. We had a pretty stout cross wind and track prep was not good at all and went away real quick.
with 2 oil downs a heavy dew and kitty litter all over SAR it was a ice skating contest this last weekend ..
and to barry hensen who told me busa's don't blow-up ..1 them oil downs was from an 08 with chunks of cases and rods left on the track ..
1Bad, when are they gonna fix that track? Have you heard anything? I was so close to going Friday night, but got started too late. Now i'm glad I didn't. Killin' me.
beats me .. but its practice on how to get down a bad track..i think i've only been to 1 track in great condition in 2 years ..
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
madkawboy
Expert Class
Posts: 398
|
posted December 23, 2009 12:21 PM
I know that Litzracing.com has done some suspension work for AMA guys such as Rickey. Litz Suspension is about 2 hours away from my house so maybe I need to go see him.
____________
2007 ZX-14
Stock Wheel Base, footshifting, pump gas
5.94 @ 128 mph
1.50 60ft
|
kawasakijockey
Pro
Posts: 1876
|
posted December 23, 2009 01:42 PM
I talked with Steve at Litz . They will be doing my shock revalve. Adams performance is who the work is dealered through, they will not work with you directly.
____________
Get on the shortbus boys 'cause its time to get schooled.
2007 ZX-14
1.38 60ft
9.03 @ 149mph
8.95 @153 small shot n2o
8.68 @160mph 5lbs boost
|
Beondwacko
Expert Class
Posts: 393
|
posted December 23, 2009 02:42 PM
5.93 @ 128 mph
That mph is mind boggling for the 1/8. Unreal.
____________
08' Atomic Silver, PCIII, Brocks pipe,BMC, -1, strapped front end
|
madkawboy
Expert Class
Posts: 398
|
posted December 24, 2009 07:51 AM
 Edited By: madkawboy on 24 Dec 2009 15:53
Here is a copy of a 5.94 pass and the other one is the one with a 1.50 60ft
I thought that I had went a 5.93 but I do not have a slip to show so I can only prove a 5.94.
-Zack
____________
2007 ZX-14
Stock Wheel Base, footshifting, pump gas
5.94 @ 128 mph
1.50 60ft
|
|
|
HOME
NEW TOPIC