zx14fan
Zone Head
Posts: 547
|
posted December 16, 2009 05:20 PM
Big how Can I tell if tps is on or not?? Relax eklipse.
  
|
Newf14
Zone Head
2007 ZX1400
Posts: 563
|
posted December 16, 2009 05:28 PM
Do you have the Powercommander program? I dont know if you can down load it off the site but the tutorials are on the powercommander site. Do you have a PC3 or PC5??
Newf14
|
zx14fan
Zone Head
Posts: 547
|
posted December 16, 2009 09:53 PM
I have the pc 5 and got a new map from power commander and i stil have the flat spot so im not sure whats going on??
|
makenna
Expert Class
Posts: 355
|
posted December 17, 2009 01:19 AM
quote:
It sounds like a poor map...nothing more, nothing less. It's not the pc that is the problem...it's the data that has been loaded into it.
Thanks Shane, that's the same thing I am thinking, but I won't get to test it out until Spring now.
The connections are tight and the ground goes straight to the battery so it has to be a bad map.
____________
English is the only language that matters.
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted December 17, 2009 07:20 AM
to check the reported throttle position you would plug in your laptop running the dynojet software that comes with your power commander. with the sofware running and the bike running you should be able to determine if you throttle position is zero with no input (at idle) as you vary the throttle you would see the tps percentage change. at wide open you should see 100%. that's what makes the lcd so sweet you can see the tps, injector duty cycle, map change percentages all in real time. i would not recommend checking your tps at 100% without a load (dyno, riding) on it although i hear punks taking it to the rev limiter in neutral all the time!
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
zx14fan
Zone Head
Posts: 547
|
posted December 17, 2009 10:05 AM
Thanks big I will try this today.
|
zx14fan
Zone Head
Posts: 547
|
posted December 17, 2009 10:07 AM
Oh and I did install a new map with the same problem.
|
|
|
HOME
NEW TOPIC