Rajun Cajun
Expert Class
Posts: 289
|
posted October 08, 2011 05:08 AM
Does antone have footage of this mod or any pics?
____________
Candy Thunder Blue 2006 ZX-14, +1 rear, RoaringToyz blocks, windscreen spikes! (VERY SHARP! DO NOT TOUCH!!!!)
Time lost can not be retrieved! Its not dumb to ask questions. Rajun Cajun
  
|
Rajun Cajun
Expert Class
Posts: 289
|
posted October 08, 2011 05:18 AM
Ooopps! I meant "anyone" Silly sleepy me! lol
____________
Candy Thunder Blue 2006 ZX-14, +1 rear, RoaringToyz blocks, windscreen spikes! (VERY SHARP! DO NOT TOUCH!!!!)
Time lost can not be retrieved! Its not dumb to ask questions. Rajun Cajun
|
KneeScraper
Parking Attendant
Posts: 27
|
posted October 08, 2011 07:50 AM
Look here for some pics on plugging the airbox line. You can see the smog pump in the pics as well, but there are no block off plates pictured.
http://zx14ninjaforum.com/messages.cfm?threadid=10189125-D56B-84E2-1A9D708DF473FBAF
This thread has the actual block off plates install, as well as pics of the smog pump.
http://zx14ninjaforum.com/messages.cfm?threadid=CAA38FC9-D56B-84E2-16C46626217188D2
I am still not comfortable just leaving that electrical plug (the one that plugs into the smog pump) unconnected, and I doubt that plastic baggie in the pic will sustain even one or two heat cycles. It seems there should be someone out there who makes an electrical plug that will seal up that connector and keep water and dirt out of there. Anyone help me out here?
Thanks!
____________
CCS Expert #43 Mid-Atlantic Region
WERA Expert #43 Mid-Atlantic Region & Northeast Region
2010 WERA Senior SuperBike MW Novice Mid-Atlantic Champion
2010 WERA Senior SuperBike MW Novice Northeast Champion
Track Coach - Roger Lyle's MotorcycleXcitement
http://www.motorcyclexcitement.com/
|
DogoZX
Expert Class
Posts: 348
|
posted October 08, 2011 02:30 PM
 Edited By: DogoZX on 8 Oct 2011 22:31
Hey Scrape,
Ivans part # AK-KAW3a is a set of block off plates, an airbox plug, and a terminator for the smog pump wires... He says the "terminator" is to fix the FI code that gets get's thrown on 2008-2011 zx14's when you disconnect the the smog pump... Thing is, the bike does NOT throw a code... So it's really just a nice clean way to terminate those wires... He sells the whole kit (plates, plug, and terminator) for $50.
|
Rajun Cajun
Expert Class
Posts: 289
|
posted October 08, 2011 06:59 PM
You could tape it or use heat shrink if your thinking of just leaving it.
____________
Candy Thunder Blue 2006 ZX-14, +1 rear, RoaringToyz blocks, windscreen spikes! (VERY SHARP! DO NOT TOUCH!!!!)
Time lost can not be retrieved! Its not dumb to ask questions. Rajun Cajun
|
Rajun Cajun
Expert Class
Posts: 289
|
posted October 08, 2011 07:39 PM
Hey KneeScraper! That was great! That info really cleared things up for me! Thanks a heck of a lot!
____________
Candy Thunder Blue 2006 ZX-14, +1 rear, RoaringToyz blocks, windscreen spikes! (VERY SHARP! DO NOT TOUCH!!!!)
Time lost can not be retrieved! Its not dumb to ask questions. Rajun Cajun
|
KneeScraper
Parking Attendant
Posts: 27
|
posted October 14, 2011 12:48 PM
Dogo,
I just installed the Ivan's block off plates and that plug connector. Ivan's makes the most complete set of block off plates that I have seen to date.
____________
CCS Expert #43 Mid-Atlantic Region
WERA Expert #43 Mid-Atlantic Region & Northeast Region
2010 WERA Senior SuperBike MW Novice Mid-Atlantic Champion
2010 WERA Senior SuperBike MW Novice Northeast Champion
Track Coach - Roger Lyle's MotorcycleXcitement
http://www.motorcyclexcitement.com/
|
Shane661
Needs a life
Posts: 11494
|
posted October 14, 2011 12:52 PM
Edited By: Shane661 on 14 Oct 2011 20:54
The bike might not throw a code, but it does affect at least the low rpm acceleration when you remove it. I have recently tested this.
I had seen mention of this in the past, but it doesn't seem to be common knowledge.
Shane
|
Bently
Needs a life
2012 14r In Blue and no Mods!
Posts: 5428
|
posted October 14, 2011 06:31 PM
quote:
The bike might not throw a code, but it does affect at least the low rpm acceleration when you remove it. I have recently tested this.
I had seen mention of this in the past, but it doesn't seem to be common knowledge.
Shane
Shane do you mean if yopu dont use the ivans plug for the wires it slows down or just in general
|
fastyz400
Parking Attendant
Posts: 15
|
posted December 11, 2011 03:05 PM
I'm thinking about doing the blockoff plate. I'm just curious, where does the excessive crank pressure go, if you do the blockoff plates?
Sorry if this is a stupid question.
|
|
|
HOME
NEW TOPIC