01smokes

Needs a job
Posts: 2243
|
posted January 17, 2010 09:15 AM
static of 42psi with a 1:1 rising rate regulator, They say these injectors will run at 100psi and at 90% duty cycle just fine if i ever needed to turn it way up
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
Ozonkiller
Expert Class
Posts: 350
|
posted March 31, 2010 07:02 PM
Ran my 14 at Texas this last weekend and went 204.4 on E85.
I ran out of injector (too much pulse width). I wanted to go richer.
I'm gonna try the "08 or later injectors.
Sure is fun getting it done on $2.50/gallon "corn".
I miss the sweet smell of the MR9 tho'. Maybe if I drop a stick of butter in the tank it'll smell like buttered popcorn.
|
SLVR_BLT

Zone Head
Chicken Strips!
Posts: 589
|
posted March 31, 2010 07:55 PM
Exactly how does E85 clean the injectors? Its corrosive to some older type of injectors/fuel systems since its mostly a alcohol base which attracts moisture / water. I can imagine extended use of E85 may result in a rusty steel tank later down the line. Modern E85 intended cars have plastic fuel tanks.
____________
2006 Kawasaki ZX14, Muzzy Full Titanium Exhaust w/ Carbon Can, PCIII, BMC Street Filter
|
01smokes

Needs a job
Posts: 2243
|
posted March 31, 2010 08:10 PM
quote: Ran my 14 at Texas this last weekend and went 204.4 on E85.
I ran out of injector (too much pulse width). I wanted to go richer.
I'm gonna try the "08 or later injectors.
Sure is fun getting it done on $2.50/gallon "corn".
I miss the sweet smell of the MR9 tho'. Maybe if I drop a stick of butter in the tank it'll smell like buttered popcorn.
what were your AFRs at?
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
gilberjj

Needs a job
Friend of Fast
Posts: 3196
|
posted March 31, 2010 09:44 PM
quote: Ran my 14 at Texas this last weekend and went 204.4 on E85.
I ran out of injector (too much pulse width). I wanted to go richer.
I'm gonna try the "08 or later injectors.
Sure is fun getting it done on $2.50/gallon "corn".
I miss the sweet smell of the MR9 tho'. Maybe if I drop a stick of butter in the tank it'll smell like buttered popcorn.
you ran out of fuel???? What mods do you have? I was under the impression that I'd be fine running e85 with a stock motor and pipe. 06 model here
|
Ozonkiller
Expert Class
Posts: 350
|
posted March 31, 2010 09:52 PM
Makes best power at 11.9:1 AFR
I could only get to 12.3 but the air on Sunday apparently was very good, much better than we ever see here in Arizona.
|
wrongway
Pro
Posts: 1078
|
posted April 01, 2010 03:23 PM
quote: Exactly how does E85 clean the injectors? Its corrosive to some older type of injectors/fuel systems since its mostly a alcohol base which attracts moisture / water. I can imagine extended use of E85 may result in a rusty steel tank later down the line. Modern E85 intended cars have plastic fuel tanks.
ethanol is a solvent and will disolve the residue left from gasoline. One the of warnings I read before converting my bike was that if you were converting a used vehicle to add another fuel filter to catch stuff loosening up from the tank and fuel lines that had accumulated over the years.
not sure what to think of the moisture issue ... I have had the stock bike on E85 since last august , even letting it sit for a month at a time and have not seen any issues. Well, I do see the paint under the gas cap is looking like paint stripper has been applied to it :-(
Roy
|
Ozonkiller
Expert Class
Posts: 350
|
posted April 01, 2010 07:07 PM
From what I understand, any vehicle produced since 1988 has been required to be tolerant of ethanol since that was when they started introducing it in the "Winter blends" in many partso of the country.
|
SLVR_BLT

Zone Head
Chicken Strips!
Posts: 589
|
posted April 01, 2010 07:16 PM
quote: From what I understand, any vehicle produced since 1988 has been required to be tolerant of ethanol since that was when they started introducing it in the "Winter blends" in many partso of the country.
Yea but were talking on 10% blend 90% gas. Ethanol is 85%/15% mix. Most cars can be tolerable to 10% mix but anything higher could cause a problem, it even says it in many owners manuals of even modern cars not to use more the 10% Ethanol blends. We get 10% ethanol gas here year round in cali, no problems to date but im not sure what E85 would do in the long run though.
____________
2006 Kawasaki ZX14, Muzzy Full Titanium Exhaust w/ Carbon Can, PCIII, BMC Street Filter
|
Ozonkiller
Expert Class
Posts: 350
|
posted April 01, 2010 07:26 PM
As I understand it, the biggest problem with E85 on non "flex fuel" cars is that the ECU can't compensate thus they run leaner than shit.
You are right tho' about the solvency of ethanol and it's tendency to break loose the funk that accumulates in the fuel systems.
Here in Arizona, the water in the fuel issue is a non issue. Yeah!!!
|
wrongway
Pro
Posts: 1078
|
posted April 01, 2010 08:48 PM
quote: Makes best power at 11.9:1 AFR
I could only get to 12.3 but the air on Sunday apparently was very good, much better than we ever see here in Arizona.
I bumped up the pressure on the stock pump to 72 psi and I have seen my 1530 run rich on the dyno.
Roy
|
Ozonkiller
Expert Class
Posts: 350
|
posted April 01, 2010 09:25 PM
Hey Roy,
Did you check the amp draw of the pump before and after. I'm curious about that and what it'll do to the reliability of the pump?
Thanks,
Tom
|
01smokes

Needs a job
Posts: 2243
|
posted April 01, 2010 11:31 PM
quote: Makes best power at 11.9:1 AFR
I could only get to 12.3 but the air on Sunday apparently was very good, much better than we ever see here in Arizona.
i need to lean mine out some im at 10.2-10.4 at WOT i wonder how much power ill pick up if i take it to 11.8
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
wrongway
Pro
Posts: 1078
|
posted April 02, 2010 02:56 AM
quote: Hey Roy,
Did you check the amp draw of the pump before and after. I'm curious about that and what it'll do to the reliability of the pump?
Thanks,
Tom
I did not check the amp draw. I don't ride this bike on the streetand did not think that itwould have too much continous use . It has been running like that since last august, but that was only 40 - 50 passes and 3 dyno sessions.
Roy
|
Ozonkiller
Expert Class
Posts: 350
|
posted April 02, 2010 06:22 AM
Thanks Roy
If I do that mod, I'l try and get that data. Curious mind want to know ya' know.
Tom
|
Ozonkiller
Expert Class
Posts: 350
|
posted April 02, 2010 06:25 AM
quote:
quote: Makes best power at 11.9:1 AFR
I could only get to 12.3 but the air on Sunday apparently was very good, much better than we ever see here in Arizona.
i need to lean mine out some im at 10.2-10.4 at WOT i wonder how much power ill pick up if i take it to 11.8
The beauty of ethanol, according to what I've learned, is that you can get away with being somewhat rich and not hurt power.
10.3 might be a bit much tho'
Good Luck,
Tom
|
01smokes

Needs a job
Posts: 2243
|
posted April 02, 2010 12:33 PM
quote:
quote:
quote: Makes best power at 11.9:1 AFR
I could only get to 12.3 but the air on Sunday apparently was very good, much better than we ever see here in Arizona.
i need to lean mine out some im at 10.2-10.4 at WOT i wonder how much power ill pick up if i take it to 11.8
The beauty of ethanol, according to what I've learned, is that you can get away with being somewhat rich and not hurt power.
10.3 might be a bit much tho'
Good Luck,
Tom
Thats what i have heard as well but when the track is on a slow day ill do some testing with it rich and lean
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
Y2KZX12R

Needs a job
CompetitionCNC.com
Posts: 3762
|
posted April 02, 2010 01:20 PM
You guys running Alcohol should be adding a top end lube to the fuel. Its very important!!!
Just a warning.
____________
Y2KZX12R
CompetitionCNC.com
|
Ozonkiller
Expert Class
Posts: 350
|
posted April 02, 2010 01:20 PM
Edited By: Ozonkiller on 2 Apr 2010 21:22
Hey Smokes,
Let me know what you find out
Tom
|
wrongway
Pro
Posts: 1078
|
posted April 02, 2010 01:22 PM
the gasoline in E85 isn't enough lube ?
Roy
|
Y2KZX12R

Needs a job
CompetitionCNC.com
Posts: 3762
|
posted April 02, 2010 01:24 PM
quote: the gasoline in E85 isn't enough lube ?
Roy
NO, gasoline isnt a lube at all.
____________
Y2KZX12R
CompetitionCNC.com
|
wrongway
Pro
Posts: 1078
|
posted April 02, 2010 02:23 PM
quote:
quote: the gasoline in E85 isn't enough lube ?
Roy
NO, gasoline isnt a lube at all.
why don't E85 cars need top lube ? I have used to get top lube with the methanol drums when I used that in my race car, but I have not seen or heard anyone else mention it for E85...
Roy
|
Y2KZX12R

Needs a job
CompetitionCNC.com
Posts: 3762
|
posted April 02, 2010 03:55 PM
quote:
quote:
quote: the gasoline in E85 isn't enough lube ?
Roy
NO, gasoline isnt a lube at all.
why don't E85 cars need top lube ? I have used to get top lube with the methanol drums when I used that in my race car, but I have not seen or heard anyone else mention it for E85...
Roy
Thats a good point. They may be putting a lube additive in it when you buy it from the pump. The main thing is that the valve stems get lube. Its also possable that Flexfuel vehicles have different guide clearances and valve seals?
But when running methanol from a drum you need an additive.
It would be a good question to ask one of the companies making it for the pumps.
____________
Y2KZX12R
CompetitionCNC.com
|
Ozonkiller
Expert Class
Posts: 350
|
posted April 02, 2010 06:18 PM
Is it because E85 is 85% ethanol and not methanol?
Not being a smart ass, I seriously am curious. I have never been advised of the top end lube by some really really fast car guys who have been running it for years.
Tom
|
wrongway
Pro
Posts: 1078
|
posted April 03, 2010 03:59 AM
quote:
quote:
quote:
quote: the gasoline in E85 isn't enough lube ?
Roy
NO, gasoline isnt a lube at all.
do you put top lube in a gas motor ?
Roy
|
|
|