HOME ARTICLES JOIN GALLERY STORE SPONSORS MARKETPLACE CONTACT US  
Register | FAQ | Search | Memberlist
Username:    Password:       Forgot your password?
BIKELAND > FORUMS > ZX-14.com > Thread: Gear Ratios and Dynos NEW TOPIC NEW POLL POST REPLY
LAB3


Needs a job
Posts: 2977
posted July 23, 2009 07:14 AM        
quote:
Man you are soooooooo easy. For someone to kiss your ass you will have
to side track your nose. :-) You again use profain lanuage to express
your little mind. Make me..... LMAO. Dude are you like 12? I will give you
one HP sprocket that is good for 70 HP and new set of sprocket bolts good for 10 MPH on the low end of a Busa only to Please Go Away to Busa.org and spew your wisdom
over there. Now class is over and you may go home to mommy now.


I got @ words for U..........Suck It! LMAO



:-) Ok I will answer your question. When I worked at D&D Exhaust we Dynoed my then new 1998 ZX-9R. We always used 6th gear so we can see what the wheel speed in
MPH was. Yes we ran it in 4th and 5th gear with the same HP reading. Lower gears just made it go thru the power band faster. Also by doing this in 6th gear we can check for
driveability from 3K to red line. And see if the A/F ratio was stable thru the power band.

Try to Google some of your questions before you post.

  Ignore this member   
Ninja ZX-14


Expert Class
Posts: 111
posted July 23, 2009 11:11 AM        
Here is a thread that has nuthing to do wit a Busa, R1, Honda but yet I gotta hear a bunch of shit. Take it like you give it because I will give it back to u. I'm not very good at running away but I will run at you!


Actin like females? Naw man, your the one that sounds like your getting all worked up (JUST like a female)
Ab the busa... You say its some "silly shit" well, go post that silly shit somewhere else.
The age, well, I'm nobodys father as of yet (I haven't had any calls trying to claim child support)
O yea, unless your real name is Forest please don't try running here, bc the odds are against you ever making it here. And if you do, there's a good chance I won't be here bc I work on the road. But run if you feel like runnin, GO FOR IT!!

Yes, this is a pointless thread. Maybe he should use the search button bc I'm pretty sure I recall a thread on this subject already, I could be wrong tho.

Naw, Im not really getn worked up because I'm laughing at some of you and a couple of other's comments that has nuthin to do with the thread. That's what makes these threads so pointless at times. A lot of sensless, negative, insulting comments. Some of you guys here are regulars at insulting people that you don't even know. Very immature and insecure. I felt like I was asking was very valid question because contray to ur belief, there are people who are wondering the same thing in ref to this. This could've been a valid thread if your kind whould sit somehere and listen or read instead of HI Jacking other people's thread with useless Gibberish. Don't need you to tell me about searching for a topic. Been there done that. If you have nothing to add to a thread just keep your comments to yourself. Very simple!

I could care less if you are a father or a mother or whatever to anyone. Thats your business. As far as running, no my name is not Forrest and I have no desire to run anywhere. No need for you to worry about that.
____________
Ninja 14

  Ignore this member   
Shane661


Needs a life
Posts: 11494
posted July 23, 2009 11:27 AM        
Ninja ZX-14,

You are getting a lot of flack because of YOUR attitude here. 99% of the guys around here are more than willing to help others; if you become part of that 99%, you will see attitudes change. I think it is a cliche'...but you "get what you give" around here.

Regarding your initial question, I would suggest an internet search. There is plenty of info on this subject.

Shane

  Ignore this member   
Ninja ZX-14


Expert Class
Posts: 111
posted July 23, 2009 11:39 AM        
quote:
Ninja ZX-14,

You are getting a lot of flack because of YOUR attitude here. 99% of the guys around here are more than willing to help others; if you become part of that 99%, you will see attitudes change. I think it is a cliche'...but you "get what you give" around here.

Regarding your initial question, I would suggest an internet search. There is plenty of info on this subject.

Shane

Shane let me say this to you and I will say it one more time. I post a thread and someone finds a reason to insult me. (go back and read the beginning of each thread if you like because you was one of them). I in turn insult back. Then others join in. If thats not "you get what you give," as u just stated, then I don't know what is. I don't start these fights but I am entitled to defend myself. I have that right. Thank You. Once again you are looking at this one sided but hey, no hair off my chest.
____________
Ninja 14

  Ignore this member   
Ninja ZX-14


Expert Class
Posts: 111
posted July 23, 2009 11:46 AM        
Ok I will answer your question. When I worked at D&D Exhaust we Dynoed my then new 1998 ZX-9R. We always used 6th gear so we can see what the wheel speed in
MPH was. Yes we ran it in 4th and 5th gear with the same HP reading. Lower gears just made it go thru the power band faster. Also by doing this in 6th gear we can check for
driveability from 3K to red line. And see if the A/F ratio was stable thru the power band.

Try to Google some of your questions before you post.

Lab, I appreciate the your post!

I have Googled and Yahoo'd already. I always keep the information gate open. I value people's knowledge, so sometimes I may go to a forum to get info in another type setting where if I have more questions, I can ask someone. Thats the versatility that posting on a forum gives you. You wont find that on Google.
____________
Ninja 14

  Ignore this member   
Shane661


Needs a life
Posts: 11494
posted July 23, 2009 11:58 AM        Edited By: Shane661 on 23 Jul 2009 19:59
quote:
quote:
Ninja ZX-14,

Shane

Shane let me say this to you and I will say it one more time. I post a thread and someone finds a reason to insult me. (go back and read the beginning of each thread if you like because you was one of them). I in turn insult back. Then others join in. If thats not "you get what you give," as u just stated, then I don't know what is. I don't start these fights but I am entitled to defend myself. I have that right. Thank You. Once again you are looking at this one sided but hey, no hair off my chest.


I guess everyone else has a problem but you, right? Try being a little more introspective. Or do you really think we are out to get you??

I guess when I posted the info about busa cases splitting, and the fact (and it is still a fact) that a streetable 1441 will not put out a real 246 hp, or when I posted the difference in STD vs. SAE numbers...none of that was helpful information?

It was definitely a waste of my time, apparently.

Shane

  Ignore this member   
Shane661


Needs a life
Posts: 11494
posted July 23, 2009 11:58 AM        
quote:
Ok I will answer your question. When I worked at D&D Exhaust we Dynoed my then new 1998 ZX-9R. We always used 6th gear so we can see what the wheel speed in
MPH was. Yes we ran it in 4th and 5th gear with the same HP reading. Lower gears just made it go thru the power band faster. Also by doing this in 6th gear we can check for
driveability from 3K to red line. And see if the A/F ratio was stable thru the power band.

Try to Google some of your questions before you post.

Lab, I appreciate the your post!

I have Googled and Yahoo'd already. I always keep the information gate open. I value people's knowledge, so sometimes I may go to a forum to get info in another type setting where if I have more questions, I can ask someone. Thats the versatility that posting on a forum gives you. You wont find that on Google.


So, since you have google'd and yahoo'd already...why not share with everyone what you discovered?

  Ignore this member   
Ninja ZX-14


Expert Class
Posts: 111
posted July 23, 2009 12:02 PM        
Didn't discover anything worth posting, that's why I came on here.

____________
Ninja 14

  Ignore this member   
Shane661


Needs a life
Posts: 11494
posted July 23, 2009 12:09 PM        Edited By: Shane661 on 23 Jul 2009 20:09
quote:
Didn't discover anything worth posting, that's why I came on here.



Wow. It took me less than 30 seconds to find this:

http://www.hotbikeweb.com/tech/0808_hbkp_dyno_tuning_for_engine/dyno_testing_and_gear_ratios.html

Now you can read it and report back your findings to everyone.

Shane

  Ignore this member   
Rideharder


Zone Head
Posts: 821
posted July 23, 2009 12:11 PM        
If I want to beat up on some liter bikes which gear ratio do I use on my ZX14?

40 mph to 178

16/41?

I keep hearing 16/43 would this gear ratio be the correct one?
I can afford a new chain..

just like to know which gear ratio makes the bike accelerate harder in third and fourth?



  Ignore this member    Click here to visit Rideharder's homepage. 
LAB3


Needs a job
Posts: 2977
posted July 23, 2009 12:48 PM        Edited By: LAB3 on 23 Jul 2009 20:49
quote:
If I want to beat up on some liter bikes which gear ratio do I use on my ZX14?

40 mph to 178

16/41?

I keep hearing 16/43 would this gear ratio be the correct one?
I can afford a new chain..

just like to know which gear ratio makes the bike accelerate harder in third and fourth?





When your stock chain has stretched enough install a 43 steel rear and a 16t front that has the dampening material on each side. Trust me this works, hold on it will Pull the front tire really Fast this way. 60 MPH in 2nd gear and punch it.....it will still try to pull the front if you
don't lean foward.

  Ignore this member   
eklipse636


Needs a life
ZX-14
Posts: 6046
posted July 23, 2009 12:51 PM        
I run 16/43. By what I understand, and correct me if I'm wrong, but the more you re gear the less you have on top end. Example: when I was stock gearing I remember running the 14's that were geared down on the last part of the 1/4. Now it accelerates harder, but I don't know ab the last part of the 1/4... Maybe that makes sense rideharder. Didn't really ans your question, but maybe it helped a little
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32

  Ignore this member   
eklipse636


Needs a life
ZX-14
Posts: 6046
posted July 23, 2009 01:00 PM        
quote:
Here is a thread that has nuthing to do wit a Busa, R1, Honda but yet I gotta hear a bunch of shit. Take it like you give it because I will give it back to u. I'm not very good at running away but I will run at you!


Actin like females? Naw man, your the one that sounds like your getting all worked up (JUST like a female)
Ab the busa... You say its some "silly shit" well, go post that silly shit somewhere else.
The age, well, I'm nobodys father as of yet (I haven't had any calls trying to claim child support)
O yea, unless your real name is Forest please don't try running here, bc the odds are against you ever making it here. And if you do, there's a good chance I won't be here bc I work on the road. But run if you feel like runnin, GO FOR IT!!

Yes, this is a pointless thread. Maybe he should use the search button bc I'm pretty sure I recall a thread on this subject already, I could be wrong tho.



Some of you guys here are regulars at insulting people that you don't even know.

I could care less if you are a father or a mother or whatever to anyone. Thats your business. As far as running, no my name is not Forrest and I have no desire to run anywhere. No need for you to worry about that.


"I'm not very good at running away, but I will run at you"
Come on down forrest!! Post up a new topic and we will get the camera crew to follow you!
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32

  Ignore this member   
rich s



Posts:
posted July 23, 2009 01:04 PM        
He don't have to run, I will pay for his plane ticket so you can run your 636 driving ass right over him Just make sure to get it on video and post it for us all to see. Of course it is illegal to beat up a 12 year old
  Ignore this member   
eklipse636


Needs a life
ZX-14
Posts: 6046
posted July 23, 2009 01:53 PM        
quote:
He don't have to run, I will pay for his plane ticket so you can run your 636 driving ass right over him Just make sure to get it on video and post it for us all to see. Of course it is illegal to beat up a 12 year old


All I have from my 636 is the front upper with headlights... Too bad that's what I drive. Wish I had a 14 like him. Wait a min, I do! He's a ninja turtle now, I wander which one he is...
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32

  Ignore this member   
Ninja ZX-14


Expert Class
Posts: 111
posted July 23, 2009 02:38 PM        
quote:
He don't have to run, I will pay for his plane ticket so you can run your 636 driving ass right over him Just make sure to get it on video and post it for us all to see. Of course it is illegal to beat up a 12 year old

Yada yada yada! Go beat yourself, lil boy!
____________
Ninja 14

  Ignore this member   
Ninja ZX-14


Expert Class
Posts: 111
posted July 23, 2009 02:42 PM        
All I have from my 636 is the front upper with headlights... Too bad that's what I drive. Wish I had a 14 like him. Wait a min, I do! He's a ninja turtle now, I wander which one he is...

Go ask "rich s" AKA rich shit. Obviously he watches a lot of cartoons. LMAO!!!
____________
Ninja 14

  Ignore this member   
Shane661


Needs a life
Posts: 11494
posted July 23, 2009 02:45 PM        Edited By: Shane661 on 23 Jul 2009 22:46
quote:
Didn't discover anything worth posting, that's why I came on here.



Wow. It took me less than 30 seconds to find this:

http://www.hotbikeweb.com/tech/0808_hbkp_dyno_tuning_for_engine/dyno_testing_and_gear_ratios.html

Now you can read it and report back your findings to everyone.

Shane

  Ignore this member   
eklipse636


Needs a life
ZX-14
Posts: 6046
posted July 23, 2009 02:48 PM        
quote:
All I have from my 636 is the front upper with headlights... Too bad that's what I drive. Wish I had a 14 like him. Wait a min, I do! He's a ninja turtle now, I wander which one he is...

Go ask "rich s" AKA rich shit. Obviously he watches a lot of cartoons. LMAO!!!


How does he "obviously" watch cartoons??
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32

  Ignore this member   
rich s



Posts:
posted July 23, 2009 02:55 PM        
The only time cartoons are on at my house is when I am banging your mom and you need something to watch while sucking on your bottle.
  Ignore this member   
Rideharder


Zone Head
Posts: 821
posted July 23, 2009 03:55 PM        
Yupers guys it helped thanks!


  Ignore this member    Click here to visit Rideharder's homepage. 
Rideharder


Zone Head
Posts: 821
posted July 23, 2009 04:04 PM        

  Ignore this member    Click here to visit Rideharder's homepage. 
Ninja ZX-14


Expert Class
Posts: 111
posted July 23, 2009 06:27 PM        
quote:
The only time cartoons are on at my house is when I am banging your mom and you need something to watch while sucking on your bottle.

rich shit, I think u got yourself confused u damn inscest piece of garbage. U meant to tell everybody that you be bang'n your own tramp ass momma while she's suckn your punk ass daddy's needle dick. A freakn house full of lousy ass dysfunctionals!
____________
Ninja 14

  Ignore this member   
eklipse636


Needs a life
ZX-14
Posts: 6046
posted July 23, 2009 06:48 PM        
If were all such assholes, why r u still here?? I hear the busa site callin ur name...
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32

  Ignore this member   
Douglas Home


Zone Head
Posts: 710
posted July 23, 2009 09:26 PM        
Ninja zx14 I think you should go play your games elsewhere and we can get back on with what we all enjoy , sharing knowledge , modifying the worlds best bike and enjoying the friendship of this forum.
Your insults are better left for bar carparks at closing time!
These guys you insult put alot of time into helping people like me , I feel lik they are my friends!
____________
Doug Mackay Australia

  Ignore this member   
All times are America/Va [ This thread is 4 pages long: 1  2  3  4     Next» ] < Previous Thread     Next Thread >
BIKELAND > FORUMS > ZX-14.com > Thread: Gear Ratios and Dynos NEW TOPIC NEW POLL POST REPLY

FEATURED NEWS   Bikeland News RSS Feed

HEADLINES   Bikeland News RSS Feed


Copyright 2000-2026 Bikeland Media
Please refer to our terms of service for further information
0.21718788146973 seconds processing time