14nooby
Zone Head
Posts: 987
|
posted April 11, 2009 04:19 AM
Reverse Shifting Pattern
Does anyone know if any linkage will work off of another bike? I want to reverse the shift pattern and there is no linkage to flip. I was thinking maybe a zx10 may slip right on the shaft.
  
|
ave8er
Novice Class
Posts: 98
|
posted April 11, 2009 05:31 AM
Just buy some Vortex rear sets. they can be set up for reverse shifting.
|
pissear
Expert Class
Professional Cockis Slap Peer
Posts: 309
|
posted April 11, 2009 05:34 AM
Take a piece of paper and a sharp pencil; etch the shift shaft on the scrub some lead over the paper, so you have that tooth pattern on the tracing. Take the same paper; a rubber hammer; bang the paper into the shift shaft is another pattern you can use as a backup. Cut the pattern out around the edges; save the paper so you now have a magnifying glass handle with the pattern at the ends. Pencil etch side > O-------O < Hammer tapped pattern side. Who looks the better pattern read? Enhance the hammer blow and lightly pencil over it too.
Go to the dealer; find a 10, match the tooth knurl pattern between bikes. Order parts if that knurl is the same clamping tooth pattern = You answered your own question is look at the design. Now start revere engineering.
____________
way too much light in the place is shoot the lights out and make it really dark inn year ear is F YO and the bike you clanked in on.
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted April 11, 2009 06:25 AM
whatever that means... something about some paper and a hammer... dont know if id go that route.
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
blackbullet76
Pro
Posts: 1134
|
posted April 11, 2009 06:31 AM
Yeah, my vortex rear sets are reversible. I haven't tried it out like that yet though.
____________
2007 ZX-14 black
Brocks s-meg exhaust
PCIII w/track map
BMC race filter
Flies removed
16 tooth front sprocket
Speedohealer
APE cam chain tensioner
Vortex rearsets
|
bigdtd
Needs a job
Interceptors
Posts: 4209
|
posted April 11, 2009 09:04 AM
quote:
whatever that means... something about some paper and a hammer... dont know if id go that route.
he is saying if you got the guts you could engineer one and make it happen, personally i would go with the vortex sets.
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 11, 2009 09:10 AM
 Edited By: Wheelie on 11 Apr 2009 19:02
quote:
Take a piece of paper and a sharp pencil; etch the shift shaft on the scrub some lead over the paper, so you have that tooth pattern on the tracing. Take the same paper; a rubber hammer; bang the paper into the shift shaft is another pattern you can use as a backup. Cut the pattern out around the edges; save the paper so you now have a magnifying glass handle with the pattern at the ends. Pencil etch side > O-------O < Hammer tapped pattern side. Who looks the better pattern read? Enhance the hammer blow and lightly pencil over it too.
Go to the dealer; find a 10, match the tooth knurl pattern between bikes. Order parts if that knurl is the same clamping tooth pattern = You answered your own question is look at the design. Now start revere engineering.
wee
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted April 11, 2009 09:11 AM
Edited By: Wheelie on 11 Apr 2009 19:02
quote:
Take a piece of paper and a sharp pencil; etch the shift shaft on the scrub some lead over the paper, so you have that tooth pattern on the tracing. Take the same paper; a rubber hammer; bang the paper into the shift shaft is another pattern you can use as a backup. Cut the pattern out around the edges; save the paper so you now have a magnifying glass handle with the pattern at the ends. Pencil etch side > O-------O < Hammer tapped pattern side. Who looks the better pattern read? Enhance the hammer blow and lightly pencil over it too.
Go to the dealer; find a 10, match the tooth knurl pattern between bikes. Order parts if that knurl is the same clamping tooth pattern = You answered your own question is look at the design. Now start revere engineering.
we
|
pissear
Expert Class
Professional Cockis Slap Peer
Posts: 309
|
posted April 11, 2009 10:50 AM
I think I meant to press a piece of paper on the end of the 14 shifter so you can use the shifter pieces off the 10 to fit the 14 shaft? You stupid enough to put a 10 shaft in a 14 is be my guest. Not seeing design to reverse things or what? So you see the splines are the same diameter is spell it out for you dummy? You stupid or what? I don't wanna make you look too stupid being a waste not to figure it out there, wheelie. You do not want to get in a pissing contest with me is I always get up on the wrong side of the bed.
I was about dead serious about placing a 10 fucking shit shaft in a 14? THAT"S SILLY! Do I look STEW PIT me looking for a pit crew is stay on the other side of the ribbon. LOL!
____________
way too much light in the place is shoot the lights out and make it really dark inn year ear is F YO and the bike you clanked in on.
|
14nooby
Zone Head
Posts: 987
|
posted April 11, 2009 11:18 AM
Who asked about a zx10 shaft?
|
pissear
Expert Class
Professional Cockis Slap Peer
Posts: 309
|
posted April 11, 2009 11:32 AM
Edited By: pissear on 11 Apr 2009 19:48
 Wheelie, I now offer two ways to get that spine answer and I put a lap on you now is twice. Why are you here wasting my time I have to come up wit two things to figure out and you blow in here blowing my wanger hanger.
____________
way too much light in the place is shoot the lights out and make it really dark inn year ear is F YO and the bike you clanked in on.
|
pissear
Expert Class
Professional Cockis Slap Peer
Posts: 309
|
posted April 11, 2009 11:44 AM
 Old race bike parts used as an example is clay pigeon, Wheelie. Tell me what threads to choose to help another. You see me up your ass saying nothing about contributing to the thread tech. Sit Down Clown! Deal with others. I put up with your shit, don't I?
____________
way too much light in the place is shoot the lights out and make it really dark inn year ear is F YO and the bike you clanked in on.
|
|
|
HOME
NEW TOPIC