ZX12Girl
Pro
Adrenaline Junkie
Posts: 1740
|
posted March 08, 2009 04:10 PM
ZX14 - ET?
Curious.
What is a stock motor ZX14 with pipe, shootout tire, maybe 4" ext arm running in the 1/4?
I also have not been paying attention so I have a repeat question.
Stock motor ZX14 RW HP? Total weight?
Thanks,
Ang
____________
Life is an adventure. Are you driving?
  
|
ZX12Girl
Pro
Adrenaline Junkie
Posts: 1740
|
posted March 08, 2009 04:13 PM
Oh! Almost forgot
Add in a throttle happy 125 lb rider 
____________
Life is an adventure. Are you driving?
|
Bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted March 08, 2009 04:20 PM
Where are you located? if you're near san diego, I'd be willing to bet that I know a raceteam with a couple of 8 second bikes that would be willing to let you try one out. All they've got is a brocks sidewinder, mcintosh arm, body work, air shifter, and PC3.
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 08, 2009 04:22 PM
4 inches would be 61 1/2 ... I had mine at 62 , bike weighted in at 505 with a gallon and a half of fuel ,, I weighted about 145 back 2 years ago ... Never used a shoot out tire , i used a 003 shinko and still do .. I was able to run 8.77 on MR9 fuel ... Pump gas ( 87 ) 8.80s
I'm over 150 now and the bike is at 63 1/2 inches and still runs low 8.80s on pump gas ..
As far as HP ( just a guess ) 181 to 183 ...I never had it on a dyno Jet dyno but did run it at one of the dyno shoot out days and made 181 on pump gas .. A friends zx14 with the same mods on a 250 dyno jet dyno made 183...That 183 was SAE not the higher STD numbers ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
ZX12Girl
Pro
Adrenaline Junkie
Posts: 1740
|
posted March 08, 2009 04:46 PM
 Edited By: ZX12Girl on 9 Mar 2009 00:48
quote:
4 inches would be 61 1/2 ... I had mine at 62 , bike weighted in at 505 with a gallon and a half of fuel ,, I weighted about 145 back 2 years ago ... Never used a shoot out tire , i used a 003 shinko and still do .. I was able to run 8.77 on MR9 fuel ... Pump gas ( 87 ) 8.80s
I'm over 150 now and the bike is at 63 1/2 inches and still runs low 8.80s on pump gas ..
As far as HP ( just a guess ) 181 to 183 ...I never had it on a dyno Jet dyno but did run it at one of the dyno shoot out days and made 181 on pump gas .. A friends zx14 with the same mods on a 250 dyno jet dyno made 183...That 183 was SAE not the higher STD numbers ..
Thanks. I was wondering if i would hit the 8's with the stock motor.
Looking for my next drag bike. I would have to add a dry shot to that...8.4, 8.5's 
How is it to launch? The ZX12 was wheelie prone even with the 6" over arm.
____________
Life is an adventure. Are you driving?
|
ZX12Girl
Pro
Adrenaline Junkie
Posts: 1740
|
posted March 08, 2009 04:49 PM
quote:
Where are you located? if you're near san diego, I'd be willing to bet that I know a raceteam with a couple of 8 second bikes that would be willing to let you try one out. All they've got is a brocks sidewinder, mcintosh arm, body work, air shifter, and PC3.
Well, a little too far for a trial run
I am in Michigan.
____________
Life is an adventure. Are you driving?
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 08, 2009 04:54 PM
quote:
quote:
4 inches would be 61 1/2 ... I had mine at 62 , bike weighted in at 505 with a gallon and a half of fuel ,, I weighted about 145 back 2 years ago ... Never used a shoot out tire , i used a 003 shinko and still do .. I was able to run 8.77 on MR9 fuel ... Pump gas ( 87 ) 8.80s
I'm over 150 now and the bike is at 63 1/2 inches and still runs low 8.80s on pump gas ..
As far as HP ( just a guess ) 181 to 183 ...I never had it on a dyno Jet dyno but did run it at one of the dyno shoot out days and made 181 on pump gas .. A friends zx14 with the same mods on a 250 dyno jet dyno made 183...That 183 was SAE not the higher STD numbers ..
Thanks. I was wondering if i would hit the 8's with the stock motor.
Looking for my next drag bike. I would have to add a dry shot to that...8.4, 8.5's
How is it to launch? The ZX12 was wheelie prone even with the 6" over arm.
Mine wheelys if i push to hard ...I can't tell you if it wheelys more than a zx12 because i never raced a zx12 ...The clutch top shelf , easy to use ... I have been as low as 1.34 60 footers with the front end glued on the ground ..The zx14 because of the TQ down low is a very easy bike to go fast on ....I leave at 5000 to 5500 , toss the clutch and pin the throttle ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
KZScott
Needs a life
high on speed
Posts: 7235
|
posted March 08, 2009 07:33 PM
I would love to see what you could run at 68in Lee
____________
01 ZX-12R 8.84 @ 156.3 no bars, DOT tires. Pump Gas, NA.... turbo 8.47 @ 164.
00 ZX-12R 8.62 @ 165.2 no bars, slicks, Pump Gas, 55 shot.... turbo 8.32 @173
00 ZX-12R Fastest NA Kawasaki in the world 1: 222.046 1.5: 226.390 Loring AFB
00 ZX-12R street turbo 1: 227.9 1.5: 234.1 Loring AFB
00 ZX-12R LSR turbo 1: 263.1 1.5: 266.5 Loring AFB Worlds fastest ZX-12R
CMG Racing RCC Turbos
|
Bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted March 08, 2009 07:36 PM
and at 125 lbs.
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 08, 2009 07:51 PM
quote:
I would love to see what you could run at 68in Lee
I'd like to ride Ninjaboys bike, i think he is about 69 inches... 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
ninjaboy311
Zone Head
Posts: 940
|
posted March 09, 2009 12:57 AM
quote:
quote:
I would love to see what you could run at 68in Lee
I'd like to ride Ninjaboys bike, i think he is about 69 inches...
You shoulda came to Valdosta....coulda rode it all weekend!!!
____________
Naarden Speedlinks Sponsored Rider
Schnitz Racing Sponsored Rider
8.74 @ 152 on stock motor and MR9 (Muzzy Powered), 205 lbs suited
|
S A Kruz
Expert Class
Posts: 127
|
posted March 09, 2009 07:00 AM
quote:
quote:
I would love to see what you could run at 68in Lee
I'd like to ride Ninjaboys bike, i think he is about 69 inches...
Smokey, hows that ZX-10 working for ya?
John
____________
2007 CBR 1000RR Red/Black Yoshimura RS-5 Full System, Flapper Mod and PCIII
2006 ZX-14 Passion Red, Flies Out, Yoshimura TRC, PCIII, TRE006a and Custom Map
2004 VTX 1300C Candy Apple Red
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 09, 2009 08:05 AM
quote:
quote:
quote:
I would love to see what you could run at 68in Lee
I'd like to ride Ninjaboys bike, i think he is about 69 inches...
Smokey, hows that ZX-10 working for ya?
John
Sold it and got a 09 zx14 ...
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
S A Kruz
Expert Class
Posts: 127
|
posted March 09, 2009 12:29 PM
quote:
quote:
quote:
quote:
I would love to see what you could run at 68in Lee
I'd like to ride Ninjaboys bike, i think he is about 69 inches...
Smokey, hows that ZX-10 working for ya?
John
Sold it and got a 09 zx14 ...
What kind of ET's were you getting on the 10?
____________
2007 CBR 1000RR Red/Black Yoshimura RS-5 Full System, Flapper Mod and PCIII
2006 ZX-14 Passion Red, Flies Out, Yoshimura TRC, PCIII, TRE006a and Custom Map
2004 VTX 1300C Candy Apple Red
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 09, 2009 06:03 PM
quote:
quote:
quote:
quote:
quote:
I would love to see what you could run at 68in Lee
I'd like to ride Ninjaboys bike, i think he is about 69 inches...
Smokey, hows that ZX-10 working for ya?
John
Sold it and got a 09 zx14 ...
What kind of ET's were you getting on the 10?
Short 9.62 ... Long 9.18
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
01smokes
Needs a job
Posts: 2243
|
posted March 09, 2009 06:07 PM
quote:
quote:
quote:
quote:
quote:
quote:
I would love to see what you could run at 68in Lee
I'd like to ride Ninjaboys bike, i think he is about 69 inches...
Smokey, hows that ZX-10 working for ya?
John
Sold it and got a 09 zx14 ...
What kind of ET's were you getting on the 10?
Short 9.62 ... Long 9.18
how long?? also what MPH
____________
PayPal, vigilart22@yahoo.com
Email, artvgl@yahoo.com
|
smokinZX14
Needs a life
Posts: 10197
|
posted March 09, 2009 08:00 PM
quote:
quote:
quote:
quote:
quote:
quote:
quote:
I would love to see what you could run at 68in Lee
I'd like to ride Ninjaboys bike, i think he is about 69 inches...
Smokey, hows that ZX-10 working for ya?
John
Sold it and got a 09 zx14 ...
What kind of ET's were you getting on the 10?
Short 9.62 ... Long 9.18
how long?? also what MPH
If i remember right it was right at 61 inches ... MPH was 148 i think ?.. I'd have to dig up my old posts to be sure ..
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
|
|
HOME
NEW TOPIC