bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted December 15, 2008 05:30 PM
LMFAO, Banned from zx14.net
just thought that I would throw it out there that I got banned from .net today for calling GPW out on his shisty business ethics. If anyone would like Lied to about what products perform the best, HPC is your best bet. GO TSUKIGI and TI-Force!!!! lol
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
   
|
Shane661
Needs a life
Posts: 11494
|
posted December 15, 2008 05:32 PM
I got banned there without even posting once!
|
smokinzx14
Needs a life
Posts: 10197
|
posted December 15, 2008 06:10 PM
I have been banned 3 times .... I'm not ban any more but i don't post either .. 
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
xstatik121
Novice Class
Posts: 79
|
posted December 15, 2008 06:15 PM
I heard they had some issues on that site. a couple of other friends told me one got banned and the other demoted or some shit... I like the info here so I dont bother looking at that site...
____________
07 ZX14 Plasm blue~PCIII cust mapped~TwoBrothers dual~Vortex sprockets down 1 in front~BMC air filter~Lowered 2" in rear 3/4 up front~200 Metzeler~Roaringtoyz links, stand~Shogun sliders~~Puig DB...
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 15, 2008 07:37 PM
quote:
just thought that I would throw it out there that I got banned from .net today for calling GPW out on his shisty business ethics. If anyone would like Lied to about what products perform the best, HPC is your best bet. GO TSUKIGI and TI-Force!!!! lol
ive got a Ti-Force!!
wee
|
bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted December 15, 2008 08:15 PM
And I bet that you wish that you would have kept the extra 600 bucks and just went with a Smeg or alienhead... Unless you were in it for the certain look or the bragging rights of saying that it's made of Titanium because it's not turning any faster times than the brocks.
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 15, 2008 08:24 PM
quote:
And I bet that you wish that you would have kept the extra 600 bucks and just went with a Smeg or alienhead... Unless you were in it for the certain look or the bragging rights of saying that it's made of Titanium because it's not turning any faster times than the brocks.
I paid less than what a Brock pipe cost, and it didnt come from HPC. so tell me what Brocks times are maybe im close.
wee
|
SteveWFL
Moderator
Posts: 27920
|
posted December 15, 2008 08:27 PM
quote:
just thought that I would throw it out there that I got banned from .net today for calling GPW out on his shisty business ethics. If anyone would like Lied to about what products perform the best, HPC is your best bet. GO TSUKIGI and TI-Force!!!! lol
i've heard that site is censored and BS like that.
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted December 15, 2008 08:44 PM
6" over, -1/+2 gearing, brocks Gen3, air shifted with a DA of 4600 FT last time we were at the track, My friend vince was running 1.45 60fts and 6.08 @ 119 consistantly. He ran a 6.03 but couldn't back it up again. He's also like 55 years old, and weighs about 235 lbs. But the old bastard can ride. (no offense on the old comment smokin' lol  )
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted December 15, 2008 08:49 PM
hell, If I could get a Ti-force for less than a brocks... I would run one too. I can't blame you there. They sound really good and they look even better. I haven't seen them on a 14... Just a k8 busa and it was running 20's. I just can't see paying 1700 bucks for one and that's as cheap as I've seen them.
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 15, 2008 08:51 PM
if he had a Ti Force he would be in the 4's.
wee
|
Wheelie
Needs a life
Old Man
Posts: 6902
|
posted December 15, 2008 08:53 PM
call superbikesupply.com mine has a ti can.
wee
|
gilberjj
Needs a job
Friend of Fast
Posts: 3196
|
posted December 16, 2008 01:18 AM
 Edited By: gilberjj on 16 Dec 2008 09:18
tiforce looks the part for sure! Alien head is still my favorite though.
as for net, I have been censored a couple times, and while there are some things that bother me, they are also fronting all the costs, and nobody has to be on the site. I come here for unbiased opinions.
|
bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted December 16, 2008 05:29 AM
You should be able to go there too... it's a shame that gpw is just out to make money. I mean fuck... brock davidson himself comes on here and tells us what is or isn't working and all that the hpc clowns can do is say what is going to net them the most profit.
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
BobC
Pro
Posts: 1736
|
posted December 16, 2008 05:29 AM
Edited By: BobC on 16 Dec 2008 13:37
Don't know about Shisters and their deals but it's worth saying that the first two 14's through the 200mph barrier in September 2006 were using TiForce systems. One was my bike. There was little else available for the 14 at that time. Today? I would go for the Brock system too.
____________
Candy Thunder Blue 2006 ZZR1400
Stock wheelbase
Max: 205.4 mph in 1.25 miles
2012 ZZR1400 in Golden Blazed Green
Brock CT Full System. etc
Max: 203.1 in 1 mile (so far)
|
oldkawboy
Needs a job
Posts: 2125
|
posted December 16, 2008 05:35 AM
Brocks was on the first 200mph ZX14 here.....:-)
Dan
|
BobC
Pro
Posts: 1736
|
posted December 16, 2008 05:41 AM
Edited By: BobC on 16 Dec 2008 14:04
quote:
Brocks was on the first 200mph ZX14 here.....:-)
Dan
By "here" I assume you mean in the USA because I got to 200mph first here in the UK at RAF Woodbridge, Judgement Day 9.
I don't want to make a big thing of this, I admire Brock too, but I did the first 200mph run and a best of 205.4 and then Snail on his ZX-14 beat me with 207mph. That was Sunday 3rd September 2006, Maxton was later the same month.
http://www.bikeland.org/board/viewthread.php?FID=27&TID=26155&set_time=
____________
Candy Thunder Blue 2006 ZZR1400
Stock wheelbase
Max: 205.4 mph in 1.25 miles
2012 ZZR1400 in Golden Blazed Green
Brock CT Full System. etc
Max: 203.1 in 1 mile (so far)
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted December 16, 2008 10:03 AM
All due respect Bob, but--- your British. Your records dont count, your beer's too flat, and your ego's are too big. Sooo 'last century'.
Was that a good enough impression of a Colonialist Upstart for ya? I can do better! just gotta don my Aussy accent.... or Canadian dry wit... or.....
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
Shane661
Needs a life
Posts: 11494
|
posted December 16, 2008 10:22 AM
Edited By: Shane661 on 16 Dec 2008 18:22
Bob, did you have a stout tailwind for those speeds? Or, as I prefer to say, "favorable conditions"?
Those are big #'s for a stock motored 14!
Shane
|
BobC
Pro
Posts: 1736
|
posted December 16, 2008 11:04 AM
That's right guys, welcome to the land of warm beer and favourable winds 
Seriously though Shane I backed up the 205mph at the next meeting with a 203mph in more normal conditions so it wasn't just the tail wind.
____________
Candy Thunder Blue 2006 ZZR1400
Stock wheelbase
Max: 205.4 mph in 1.25 miles
2012 ZZR1400 in Golden Blazed Green
Brock CT Full System. etc
Max: 203.1 in 1 mile (so far)
|
87gtNOS
Zone Head
Posts: 620
|
posted December 16, 2008 03:31 PM
My TiForce!!!!!!! (sorry for the wintery pic from last spring!!)
and just FYI....HPC emailed me a map for my TiForce...and on the dyno, the STOCK map (NO MAP LOADED!) made more rwhp by a landslide over his map!!
____________
01 ZX12R
07 ZX14 - YEAH BABY!
03 ZX9R-traded in for the 14!!! June 07!
05 636-traded in for the 9 Sept 05
|
Sticks_n_Stones
Needs a job
Posts: 3930
|
posted December 17, 2008 07:59 AM
Right map for dyno runs and right map for at-speed ramair-in-effect hp are two different things. I tried to get Rob Muzzy's brother (sorry, forgot his name- Rob was on vacation) to shoot me a dyno only map for the dyno shootout I posted up a few months ago, but no dice. He acknowledged there is more hp you can get out of the 14's with a dyno only map and even said "I'm not saying we dont have one [dyno only map]", but "we're never gonna put out a map that can't be run on the street under real world conditions."
____________
'06 zx14
Muzzy M10/M14
PCIII w/ Muzzy map
Flies out K&N in!
bits n pieces...
|
JMAC
Parking Attendant
Posts: 11
|
posted December 17, 2008 03:18 PM
Really nice lookin bike 87
Where did you get and what brand is that exhaust hanger?
|
87gtNOS
Zone Head
Posts: 620
|
posted December 17, 2008 06:12 PM
JMAC, I got it on Ebay last spring. I just took a look for you and couldn't find one on ebay, sorry.
It was like $40!
____________
01 ZX12R
07 ZX14 - YEAH BABY!
03 ZX9R-traded in for the 14!!! June 07!
05 636-traded in for the 9 Sept 05
|
Peno
Novice Class
Peno
Posts: 48
|
posted December 17, 2008 07:31 PM
JMAC Its from BikersSupplyCo.com 717-684-5933.I bought other stuff their,but remember the hanger.
|
|
|
HOME
NEW TOPIC