CraigChrist
Pro
BAWLS
Posts: 1043
|
posted June 15, 2010 01:56 AM
quote:
i gota ivans tre 008 on my bike the best 80 bucks youll ever spend
Now we know that this guy is full of shit lol
____________
60ft-------1.42
1/8th------5.97
mph-------119
  
|
biggmoinc
Zone Head
Posts: 747
|
posted June 15, 2010 06:07 AM
quote:
we only have 8th mile track in sturgis and i have not ran my 240 yet this year but its fun going to grudge matches on wed nights its like a test and tune but funner. not many bikes racing here. and cant run with a car but for 20 bucks you can get in line all night and run down the track 5 hours or so its fun i spin out alot with the 190 tire hoping to get better time with my 240
that 240 is not going to better ur times by ne means, u shouldve changed ur 190 tire to a stickier tire, mayb a shinko or power one or whatever they call it, a 180 shinko ultra soft was like 130 or some shit, just cause the 240 is wider the contact patch is not really that much more than a 190 wit 16 to 21psi in it. I shouldve stretched n ran mine before the conversion then i would know exactly what is the difference with the wide tire,
____________
07 ZX14 bmc filter, muzzy m14, 16/44,66",auto shift, 6'3, 204lbs/1.54/3.99/6.03@120/7.8/9.32@147
biggmo@aol.com
|
biggmoinc
Zone Head
Posts: 747
|
posted June 15, 2010 07:13 AM
quote:
Where you getting the offset sprokets?
Do you have pics of your bike with the 240 on it? is it DEAD center?
Thanks fo sharing
This is my 00 240, it looks pretty close to me!
____________
07 ZX14 bmc filter, muzzy m14, 16/44,66",auto shift, 6'3, 204lbs/1.54/3.99/6.03@120/7.8/9.32@147
biggmo@aol.com
|
biggmoinc
Zone Head
Posts: 747
|
posted June 15, 2010 07:15 AM
N this tire is the metzler, doesnt hook for nothing, lol, now that pirelli diablo, now thats a whole different story, when i get back to work the end of this week imma try n get that money to get my diablo back, then i will be at the local track trying to get those 9.6x, lol
____________
07 ZX14 bmc filter, muzzy m14, 16/44,66",auto shift, 6'3, 204lbs/1.54/3.99/6.03@120/7.8/9.32@147
biggmo@aol.com
|
THEMADKAW
Expert Class
Posts: 211
|
posted June 16, 2010 02:15 PM
i have a extra stock swingarm and a avon attack 240 tire. (not installed on bike yet) with the tire standing on the floor the bead width is just a hair more than 8.5", it came off 18x8.5 RC Comp wheel, when it was mounted the side wall was even with the lip of the wheel, when you put the tire in the swingarm you have approx. 1/8" clearance side to side with the tire all the way forward. with that being said, there is no way that the tire is going to be offset to one side unless the swingarm is.
and the bump to 18 is because you cant get a 240mm tire in a 17. 330mm is a 17.
|
biggmoinc
Zone Head
Posts: 747
|
posted June 16, 2010 02:32 PM
My 240 does rub the tire lip if the chain gets too loose, all in all though, i'm happy with it n i run it as fast as everybody else do on the highway, still workin on getting fast in the 1/4, lol, but as far as a 240 on a 14 i wouldnt think it would slow that beast up much, with the amount of torque n hp that thing puts out i believe whoever does it will be happy, plus as wide as the 14 ass end is u need more meat back there to look good, unless ur bike looks like shanes, that is one sexy bike, please dont go the catalyst body, ur bike looks awesome just as it sits!!!!!!!
____________
07 ZX14 bmc filter, muzzy m14, 16/44,66",auto shift, 6'3, 204lbs/1.54/3.99/6.03@120/7.8/9.32@147
biggmo@aol.com
|
THEMADKAW
Expert Class
Posts: 211
|
posted June 16, 2010 02:40 PM
i'm still gonna do it it think. i'm just tryin to figure out a lighter wheel to trim some mass back off of it. would like to have carrazzerias. but i need one just to see if it'll even go in the swingarm.
anyone have an 18x8.5 carrarreria they'd like to volunteer for this project?! LOL
OH WELL! keep ridin, savin, and waitin!!!! LOL
|
totall2tall
Parking Attendant
Posts: 8
|
posted June 17, 2010 04:39 PM
cant figure out how to put a pic on or i would and yes its dead center
|
dubious
Needs a life
Needs more time to ride!
Posts: 8442
|
posted June 17, 2010 07:09 PM
 Edited By: dubious on 18 Jun 2010 03:10
[ img] http// etc.jpg [ img]
no spaces inside or outside the brackets
where you getting your sprokets?
____________
natural selection.....
destiny will overcome intervention.
Some are not worthy of the effort.
|
totall2tall
Parking Attendant
Posts: 8
|
posted June 20, 2010 04:08 PM
ebay i got bearings and offset sprocket 1/4 inch
|
Soupbone
Parking Attendant
Posts: 13
|
posted September 19, 2011 06:25 PM
Parking Attendent,what did you do about bolting da sprocket on to keep it from rubbing
|
Cjuni
Parking Attendant
Posts: 24
|
posted September 20, 2011 03:51 PM
Edited By: Cjuni on 20 Sep 2011 23:59
oops, @ biggmo.......thats not a zx14 or stock swingarm.....is it?
|
eklipse636
Needs a life
ZX-14
Posts: 6046
|
posted September 20, 2011 04:28 PM
quote:
oops, @ biggmo.......thats not a zx14 or stock swingarm.....is it?
Does that look like a 14 tail?
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
Soupbone
Parking Attendant
Posts: 13
|
posted September 20, 2011 08:36 PM
Parking Attendent,you have a ZX 14 right
|
biggmoinc
Zone Head
Posts: 747
|
posted September 21, 2011 04:16 AM
Its a 6" over 240 kit for a 12, but I've seen 240 wheels on stock 14 swingarms n all they changed where spacers n offset front sprocket
____________
07 ZX14 bmc filter, muzzy m14, 16/44,66",auto shift, 6'3, 204lbs/1.54/3.99/6.03@120/7.8/9.32@147
biggmo@aol.com
|
Cjuni
Parking Attendant
Posts: 24
|
posted September 21, 2011 04:35 AM
@ biggmo.....thanks!
|
Soupbone
Parking Attendant
Posts: 13
|
posted September 21, 2011 05:34 PM
I got my 240 on my stockswingarm but I can't get room between da bolt & da swingarm
|
biggmoinc
Zone Head
Posts: 747
|
posted September 22, 2011 05:29 AM
I need different spacers, since the rim is wider stock spacers will b to big(thick)
____________
07 ZX14 bmc filter, muzzy m14, 16/44,66",auto shift, 6'3, 204lbs/1.54/3.99/6.03@120/7.8/9.32@147
biggmo@aol.com
|
Soupbone
Parking Attendant
Posts: 13
|
posted September 22, 2011 05:59 AM
I have the spacer I need a flat head Alan head bolt
|
Cjuni
Parking Attendant
Posts: 24
|
posted September 22, 2011 06:04 AM
@ Soupbone....can u post some pics? Also are u using the factory wheel, just widen or an 18" wheel??
Thanks in Advance
|
Soupbone
Parking Attendant
Posts: 13
|
posted September 22, 2011 08:18 AM
I will try,& yes it is the factory wheel that I had widen.Is that a factory u had done on a stock swing arm.
|
Rajun Cajun
Expert Class
Posts: 289
|
posted September 22, 2011 09:26 AM
How about some side view pics or different angle pics of 14's with 240 in stock swing arm? Thanks all!
____________
Candy Thunder Blue 2006 ZX-14, +1 rear, RoaringToyz blocks, windscreen spikes! (VERY SHARP! DO NOT TOUCH!!!!)
Time lost can not be retrieved! Its not dumb to ask questions. Rajun Cajun
|
Soupbone
Parking Attendant
Posts: 13
|
posted September 22, 2011 02:13 PM
Ok do u have a zx14
|
Soupbone
Parking Attendant
Posts: 13
|
posted September 23, 2011 06:32 AM
I dmt know how to post the pic
|
Rajun Cajun
Expert Class
Posts: 289
|
posted September 23, 2011 09:26 AM
I dont want my bike slower because of extra weight but, I do like the look of a wider wheel on the zx14. It makes the tail section of the bike look proportional and overall bad ass!
____________
Candy Thunder Blue 2006 ZX-14, +1 rear, RoaringToyz blocks, windscreen spikes! (VERY SHARP! DO NOT TOUCH!!!!)
Time lost can not be retrieved! Its not dumb to ask questions. Rajun Cajun
|
|
|
HOME
NEW TOPIC