kawabonzai

Zone Head
Leader of the Back.
Posts: 537
|
posted August 20, 2008 02:50 PM
2009 ZX-14 Rumors
Yo!
So the Kawasaki dealer show is around September 20th 2008, right? I can't believe we are only a month out and there are no sneak pics or rumored specs for the 2009 ZX-14. I've Googled my heart out and can't find didly on it.
My hunches are that since 08 was the revamp year, the 09's wont have much mechanicaly to differ. I'm hoping for maybe a new color, digital readout speedo, and 4 square inches of storage space.
Anyone finding any info's out there?
____________
PC-III w/USB, Muzzys M14 + Carbon Oval + M10, BMC Race Filter, Flies Out, Buell Pegs, Heli Risers
www.TucsonSportRiders.com - Tucson's Premier SportRider Community
|
CrotchRocket

Moderator
Bracket Racing with Betsy
Posts: 8038
|
posted August 20, 2008 02:56 PM
Im hoping for a different bike...
____________
Jason Miller StreetBike Seminars
*****DragRacers do it better, because they dont cut Corners*****
|
Ninja_knight

Zone Head
Posts: 666
|
posted August 20, 2008 02:59 PM
Nope! Not even a squeak from the media. The only thing you will see this year is a color change.
____________
2009 B&O Special Edition, Brock's CF Gen 3 Exhaust, Dark Smoke ZG Double Bubble Windshield, PCIII, Muzzy Fan, Heli Risers, Throttlemeister Heavy, Nautilus Stebel Horn, Waiting on HID's and Tinted Signal Lens
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted August 20, 2008 03:05 PM
quote: Im hoping for a different bike...
Ditto that.........
One with a real frame, that is easy to turbo, and jugs not attached to the cases, and a 6 spring clutch......(for personal reasons.....tee hee)
Until then, I see it as no better than a good 1290 zx12.
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
stevewfl

Moderator
Posts: 27920
|
posted August 20, 2008 03:30 PM
I'll be buying an '09.... if they fix the seat design, shed poundage, add slipper clutch, put a decent rear shock on (thats not a marshmallow at firmest setting), offer it in kawi green, find a place for the oil drain bolt, and knock a few bux off the price :P
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
kawabonzai

Zone Head
Leader of the Back.
Posts: 537
|
posted August 20, 2008 03:32 PM
I'd go green too.
____________
PC-III w/USB, Muzzys M14 + Carbon Oval + M10, BMC Race Filter, Flies Out, Buell Pegs, Heli Risers
www.TucsonSportRiders.com - Tucson's Premier SportRider Community
|
Ninja_Knight

Zone Head
Posts: 666
|
posted August 20, 2008 03:33 PM
quote: I'll be buying an '09.... if they fix the seat design, shed poundage, add slipper clutch, put a decent rear shock on (thats not a marshmallow at firmest setting), offer it in kawi green, find a place for the oil drain bolt, and knock a few bux off the price :P
Ha ha! You've been saying basically the same thing for years! Perhaps THIS is your year, Steve! Can someone at kawi give this man a slipper clutch please?
____________
2009 B&O Special Edition, Brock's CF Gen 3 Exhaust, Dark Smoke ZG Double Bubble Windshield, PCIII, Muzzy Fan, Heli Risers, Throttlemeister Heavy, Nautilus Stebel Horn, Waiting on HID's and Tinted Signal Lens
|
bawls
Needs a job
re-learning to ride
Posts: 2701
|
posted August 20, 2008 03:45 PM
quote:
Until then, I see it as no better than a good 1290 zx12.
Except that it's reliable, more comfy, has a MUCH better clutch, and looks a lot better.
____________
Best 60ft: 1.42
Best 1/8th: 5.97
Best 1/8th MPH: 119
Brockland Police Badge # 001
|
ninja12
Needs a job
Posts: 3310
|
posted August 20, 2008 03:59 PM
quote:
quote:
Until then, I see it as no better than a good 1290 zx12.
Except that it's reliable, more comfy, has a MUCH better clutch, and looks a lot better.
I like both in the looks department, but the rest is dead on!
|
bigdtd

Needs a job
Interceptors
Posts: 4209
|
posted August 20, 2008 04:12 PM
Edited By: bigdtd on 20 Aug 2008 18:39
i would like to see them make a special edition (gadson?) dragrace version lengthened and lowered that runs 8's stock in kawi racing green. it would give kawi a hot rod parts line for stuff like swingarms, shocks, etc. i know there is good aftermarket stuff but if they made one from the factory it would sell like hotcakes.
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
drewzx-14

Zone Head
Andrew
Posts: 553
|
posted August 20, 2008 04:23 PM
i hope they come out with those new literbikes. I am anxiously awaiting some debuts.
____________
2009 Yamaha R1-SOLD!
2013 Zx-14R Green ABS
|
eklipse636

Needs a life
ZX-14
Posts: 6046
|
posted August 20, 2008 04:35 PM
if the made the special edition one the only problem i could think of is they would charge you TWO ARMS and a leg for it!!
____________
Best: 60ft 1.351 1/8 5.68 mph 123.98 1/4
8.89 mph 151.32
|
stevewfl

Moderator
Posts: 27920
|
posted August 20, 2008 05:00 PM
quote:
quote: I'll be buying an '09.... if they fix the seat design, shed poundage, add slipper clutch, put a decent rear shock on (thats not a marshmallow at firmest setting), offer it in kawi green, find a place for the oil drain bolt, and knock a few bux off the price :P
Ha ha! You've been saying basically the same thing for years! Perhaps THIS is your year, Steve! Can someone at kawi give this man a slipper clutch please?
yes PLEEEEEEEZ!!!!
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
bigdtd

Needs a job
Interceptors
Posts: 4209
|
posted August 20, 2008 05:49 PM
just pull in the left lever if you want it to slip....
____________
2006 Black ZX-14,6 inches over,16/42, flies out,BMC Street Filter,Brock's Street Meg,Brock's Radial Mount Strap,PClll with Race map,Dynojet LCD w/Techmount, ZX-14 fender eliminator,Pilot Power2CTs,Speedohealer,Pazzo Levers,Cox Radiator Guard, Garmin Nuvi 265WT
|
1badzx12r
Needs a life
Posts: 8321
|
posted August 20, 2008 06:18 PM
quote:
quote:
One with a real frame, that is easy to turbo,
.
dude it don't get any easier .... oh wait its the 4lbs of pendulum your missing ....
____________
http://www.youtube.com/watch?v=S06nIz4scvI
|
stevewfl

Moderator
Posts: 27920
|
posted August 20, 2008 07:24 PM
quote: just pull in the left lever if you want it to slip....
wish it was that simple-
slipper clutches are the modern day way of eliminating engine forces that cause the back wheel to hop, skeet, lock up etc as the bike decelerates into hot corners. actually without a slipper clutch we "blip" the throttle going into turns to "load up" the bike to try and avoid the back wheel BS from happening.
slipper clutches have been on the professional race circuits since the 80's, and because of the growing popularity for the past couple of years of track days, they've been put on the high performance street bikes.
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
MJ

Zone Head
Posts: 560
|
posted August 20, 2008 07:38 PM
Personally I like the 14 as-is. Pull the flies, add a pc/exhaust/filter and it rocks for my style of riding. But then I use it for its intended purposes, to be a mega fast, comfy, smooth, good handling roadbike. For the guys that want all the race stuff/super light weight on the 14, why not buy a liter race bike instead? Thats what the liters are for....not the 14. Why try and make something not designed for a particular job, try and do the job, when they already make the perfect tool?
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted August 20, 2008 09:25 PM
quote:
quote:
quote:
Until then, I see it as no better than a good 1290 zx12.
Except that it's reliable, more comfy, has a MUCH better clutch, and looks a lot better.
I like both in the looks department, but the rest is dead on!
I disagree with all that........
I got 1000 passes out of a 12. And no one will disagree with MY clutch..........
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
lietoome

Needs a job
Posts: 2033
|
posted August 21, 2008 04:37 AM
Nox, since when did the zx12 come stock with a 1290?
How can you not agree on the more comfy, you ride on a fiberglass drag seat.
As for the clutch, that ones up in the air with the 12. I think your clutch hand has more to do with the clutch life of your 12....is your clutch stock? I put 30K miles on my 12 and only went thru one set of fibers/steels which had more to do with the hot laps and my lack of skill than the product.
Looks department is all about the zx12...Sex wrapped in plastics. I'll keep the 6 eyed beast with the banana seat...and pick up another slightly modded 12 someday, maybe even a turbo buusta.
For the true racers/gearheads, the 12 may be better. Only you can say which tool is better for you. For me, its a 14...hands down.
|
NOX
Needs a job
PMRA / TMRC Super Street 4022
Posts: 3745
|
posted August 21, 2008 05:31 AM
I was joking, since everyone knows I run a lock up.........
BUT, catalyst does make a very comfy seat.............lol
____________
42 Wins
21 Runner-ups
2010 TMRC Super Street Points Champion
2010 PMRA Super Street #3 Points
2009 PMRA Super Street Points Runner-Up
6 Time Centerville Dragway Points Champion
Sponsored by:
Scorpion Helmets
Galfer Braking
AMSOIL
Steve's Speed Shop
Kawasaki Sports Center
Mickey Thompson Tires
Catalyst Racing Composites
Conway Cycle
Syed Leathers
|
slates
Expert Class
Posts: 377
|
posted August 21, 2008 05:41 AM
Love the bike in its current form, but the changes I'd like to see would be:
1) less body panels - incorporate grills into upper fairing or get rid of the grills all together
2) rider and passenger seats separated with better underseat storage and passenger seat replacement cover.
3) get rid of the secondary throttle bodies or add a switch similar to Suzuki with the ABC selection
____________
black zx14 - Brock's Gen3 Carbon, PCIII, no secondaries, Carrozzeria wheels, Sato rearsets, Pazzo levers, GPR V4 steering damper, Puig windscreen, Tiger Racing chain guard
|
scotty
Parking Attendant
Posts: 20
|
posted August 21, 2008 08:34 AM
I'd like to see a second fan.
|
06redzx14
Pro
Posts: 1022
|
posted August 21, 2008 08:36 AM
I just want the cylinder block seperate and maybe more storage under the seat
____________
06 alien head, no flies, PC+hub, 16/45 44 43, air shifter, dry shot
|
smokinzx14

Needs a life
Posts: 10197
|
posted August 21, 2008 11:06 AM
The word i got is from a friend of a friend that is married to the sister of the brother that cleans the bath rooms at the dinner that the top man at Kawi eats at said " it's going to be 1500CC with zx10 body work weighing in at 390 pounds dry ".... Now put that in your pipe and smoke it ....
____________
Smokin Performance Cycles..
Tampa Bay , FL .. Brocks Performance Dealer ..
Gen 2 ZX14R Best ET 8.43 , Best MPH 164.95
|
stevewfl

Moderator
Posts: 27920
|
posted August 21, 2008 11:43 AM
quote: The word i got is from a friend of a friend that is married to the sister of the brother that cleans the bath rooms at the dinner that the top man at Kawi eats at said " it's going to be 1500CC with zx10 body work weighing in at 390 pounds dry ".... Now put that in your pipe and smoke it ....
and GREEN!?
:P
____________
2010 Concours14
'08 R1 YAMAHA
ZX14 gone!
CBR600RR track bike
|
|
|